2004 DACIA SUPERNOVA seats

36
STEERING ASSEMBLY
36 - 5
NOISE ABSORBER BEARING
DISMOUNTING
Loosen the screws of the wheel;
Lift the front part of the vehicle
Dismount the wheel on the opposite side of the steering column;
Dismou nt :
-casing protection bellows;
-the steering auxiliary connected rod.
Rotate the steering wheel until the rack is withdrawn.
Remove, by means of a screwdriver the noise absorber bearing.
REMOUNTING
Carefully clean t he rack and the noise absorber bearing seat and grease with special grease
containing MoS2.
In the same way as at the dismounting, place back the noise absorber bearing paying attention
to fix the three pins (A) in their seats.
Rotate the steering wheel in the opposite direction until the rack stands out the bearing.
Remount on the rack: - the steering auxiliary connecting rod (mount a new safety washer);
- protection bellows.
Check and adjust the parallelism, if necessary.
vnx.su

Mechanisms and accesoires5
Climatisation6
Garnishing and tack room7
Electr ic equipment8
57 LOWER INTERNAL ACCESSORIESDashboard..................................................... 57-1
Dashboard upper part ................................... 57-3
Central console............................................. 56-4
Documents compartment.............................. 57-5
Ste ering whee l axle hal f-cases...................... 57-6
Inside rear view mirror.................................. 57-7
S un visors...................................................... 57-8
Turning handles............................................ 57-9
Handbrake case............................................. 57-10
59 SAFETY ELEMENTS Front safety belts........................................... 59-1
Re ar safety belts............................................ 59-2
61 HEATING Climat e control asse mbly.............................. 61-1
Housing manifold.......................................... 61-2
Heating radiator............................................. 61-3
C limat e control blower.................................. 61-4
Diagnosis....................................................... 61-5
62 AIR CONDITIONING Generalities.................................................. 62-1
AC unit operating diagram........................... 62-4
Evaporator.................................................... 62-5
Comp ressor................................................... 62-7
Condenser..................................................... 62-8
Pr essure controller........................................ 62-9
Dryer filter tank............................................ 62-10
Unit piping.................................................... 62-11
C limat e control unit...................................... 62-12
Diagnosis....................................................... 62-13
65 SEALING OPENING ELEMENTS Carriage body se aling................................... 65-1
66 SEALING WINDOWS AND SCREENS Glasses sealing............................................. 66-1
Insi de wipers ............................................... 66-2
Outside wipers.............................................. 66-3
71 INTERNAL BODY TRIM Carriage body coverings.............................. 71-1
Fr ont door threshold covering...................... 71-2
Upper front pillar covering........................... 71-3
Re ar door threshold covering....................... 71-4
Mi ddle pillar covering.................................. 71-5
Re ar passa ge covering.................................. 71-6
Re ar wheel passage covering........................ 71-7
Mi ddle pillar lower covering........................ 71-8
Re ar side panel covering............................... 71-9
R oof gasket .................................................... 71-10 Carpets
......................................................... 71-11
Cowl panel noise absorbent ......................... 71-12
72 SIDE OPENING ELEMENTS TRIM Front door panel........................................... 72-1
Re ar door panel............................................ 72-2
74 BACK SEAT TABLES AND PARCEL SHELVES Upper back panel replacement...................... 74-1
75 FRONT SEATS FRAMES AND RUNNERS Front seats.................................................... 75-1
Fr ont seat slides guides................................ 75-2
Fr ont seat armature...................................... 75-3
76 REAR SEATS FRAMES AND RUNNERS Rear bench................................................... 76-1
B ench seats .................................................. 76-2
77 FRONT SEAT TRIM Seats upholstery dismounting...................... 77-1
Back rest upholstery dismounting................ 77-2
78 REAR SEAT TRIM Seats upholstery dismounting...................... 78-1
Back rest upholstery dismounting................ 78-2
80 BATTERY - FRONT HEADLIGHTS Battery... ...................................................... 80-1
Head lamp asse mb ly..................................... 80-4
F og lamps.................................................... 80-5
Bulbs r eplacement....................................... 80-6
Headlamps adjustment................................. 80-7
81 REAR AND INTERIOR LIGHTING Bulbs r eplacement........................................ 81-1
Bulbs ............................................................ 81-2
Diagnostic.................................................... 81-3
Cockpit fuse box.......................................... 81-6
82A HORN - ENGINE IMMOBILISER Gene ralities.................................................. 82A-1
Key head repla ceme nt.................................. 82A-6
E.C.U. decoder repla ceme nt........................ 82A-7
Antistarting bushing replaceme nt................ 82A-8
RF remote control for blocking/unlocking
t he doors...................................................... 82A-9
Electric control unit injection repla cement... 82A-10
Pr ocedures.................................................... 82A-11
Diagnostic..................................................... 82A-17
vnx.su

SAFETY ELEMENTS
59REAR SAFETY BELTS
DISMOUNTING
F old the seats (5) and (6) and remove them from supports.
Dismount the protecto rs (1) of the attachment rear safety belt screws (2) on the rear side panels.
Dismount the attachment screws (3 ) on the lining lateral frame.
Dismount the attachment screws (4) of the rear belts lock on central floor
REMOUNTING
Perform the dismounting operations in the reverse order.
The safety belts attachment screws are to be tighten at a moment of 2.7 daNm.
1
2
43
56
59 - 2
vnx.su

75
FRONT SEATS FRAMES AND R UNNERS
75-1
CO
NTROL/ADJUSTMENT
The front seats, equipping DACIA NOVA vehicles, have two possibilities of adjustment:
- front or rear longitudinal movement ,which can be performed by lever’s operation (1);
- seat back overturning up to the horizontal position, by rotating the round button (2).
DISMOUNTING
For dismounting, the seat will be placed in the middle position by lever’s (1) lifting and per-
form the following operation s:
Remove the lateral cross bar protector (3) by dismounting the metal screws (4 ) .
Dismount screws (5), which are fixing the seat on the central and lateral cross bar.
Release the front seat.
REMOUNTING
Perform in the reverse order the dismounting operations.
41
2
3
FRONT SEATS
vnx.su

75
FRONT SEATS FRAMES AND R UNNERS
75-2
FRONT SEAT SLIDES GUIDES
DISMOUNTING
Di smount the attachment screws (4) of the
slides guides (1) and (2) on the front seat, by
acting upon the control lever (3) and move the
slide guides in one way or the other as required.
Release s lides guides from the front seat.
REMOUNTING
Perform in the reverse order the dismounting
operations.
1
3
24
vnx.su

75
FRONT SEATS FRAMES AND R UNNERS
FRONT SEAT ARMATURE
DISMOUNTING
Dismount the front seat off the vehicle.
Dismount slides guides from the seat.
Remove the upholstery.
Detach the quilt from the seat armature.
Release t he front seat armature.
REMOUNTING
Perform in the reverse order the dismounting
operations.
1
75-3
vnx.su

76
REAR SEATS FRAMES AND RU NNERS
76-1
The rear bench is composed of two separated swinging seats, unequal and two separated,
unequal, swinging back rests.
DISMOUNTING
Di smount the seats, by swinging and by removing them from the welded supports on the
carriage body.
For the back rests dismounting perform the following operations: - lift the unlocking buttons (1), and swing out the back rests a head.
- dismount the four screws for the attachment of hinges on the wheels’ passage.
- remove the back rests from the central hinge
REMOUNTING
Perform in the reverse order the dismounting operations.
REAR BENCH
vnx.su

76
REAR SEATS FRAMES AND RU NNERS
76-2
DISMOUNTING
Dismount the bench seats and remove the upholstery from the seats quilts
(3 ) and (4).
Di smount the bench’s backs rests and remove t he upholstery from the back rests quilts (1)
and (2).
Release the reinforced quilts of the bench.
REMOUNTING
Perform in the reverse order the dismounting operations.
BENCH SEATS
vnx.su