2004 DACIA SUPERNOVA seat adjustment

MECHAN ICAL ELEMENTS CONTROL
37
GEARS CONTROL ADJUSTMENT
This is to be performed after mounting the engine-gearbox assembly and the assembly lever-
control case every time when : - dismounting of the engine-gearbox a ssembly, t he c ontrol ba r or the assembly lever-
control case;
- establishin g of failures such as: gear change impossibility or unexpected gear uncoupling,
gear blocking.
For the gear control adjustment the CV 550 device i s to be used;
M ount the CV 550 device on the assembly lever- control c ase;
A ttach the control bar to the control lever end;
Place the gear lever in the device seat and fix it in this position by means of the device handle;
Tighten the attachment screw 1 of the bar to the lever at the required moment of 1.2 daNm;
Dismount the CV 550 device from the control box.
Check the gears coupling. THE GEARS CONTROL
37 - 24
SPECIAL TOOLS
CV 550 Linkage adjusting device
vnx.su

Mechanisms and accesoires5
Climatisation6
Garnishing and tack room7
Electr ic equipment8
57 LOWER INTERNAL ACCESSORIESDashboard..................................................... 57-1
Dashboard upper part ................................... 57-3
Central console............................................. 56-4
Documents compartment.............................. 57-5
Ste ering whee l axle hal f-cases...................... 57-6
Inside rear view mirror.................................. 57-7
S un visors...................................................... 57-8
Turning handles............................................ 57-9
Handbrake case............................................. 57-10
59 SAFETY ELEMENTS Front safety belts........................................... 59-1
Re ar safety belts............................................ 59-2
61 HEATING Climat e control asse mbly.............................. 61-1
Housing manifold.......................................... 61-2
Heating radiator............................................. 61-3
C limat e control blower.................................. 61-4
Diagnosis....................................................... 61-5
62 AIR CONDITIONING Generalities.................................................. 62-1
AC unit operating diagram........................... 62-4
Evaporator.................................................... 62-5
Comp ressor................................................... 62-7
Condenser..................................................... 62-8
Pr essure controller........................................ 62-9
Dryer filter tank............................................ 62-10
Unit piping.................................................... 62-11
C limat e control unit...................................... 62-12
Diagnosis....................................................... 62-13
65 SEALING OPENING ELEMENTS Carriage body se aling................................... 65-1
66 SEALING WINDOWS AND SCREENS Glasses sealing............................................. 66-1
Insi de wipers ............................................... 66-2
Outside wipers.............................................. 66-3
71 INTERNAL BODY TRIM Carriage body coverings.............................. 71-1
Fr ont door threshold covering...................... 71-2
Upper front pillar covering........................... 71-3
Re ar door threshold covering....................... 71-4
Mi ddle pillar covering.................................. 71-5
Re ar passa ge covering.................................. 71-6
Re ar wheel passage covering........................ 71-7
Mi ddle pillar lower covering........................ 71-8
Re ar side panel covering............................... 71-9
R oof gasket .................................................... 71-10 Carpets
......................................................... 71-11
Cowl panel noise absorbent ......................... 71-12
72 SIDE OPENING ELEMENTS TRIM Front door panel........................................... 72-1
Re ar door panel............................................ 72-2
74 BACK SEAT TABLES AND PARCEL SHELVES Upper back panel replacement...................... 74-1
75 FRONT SEATS FRAMES AND RUNNERS Front seats.................................................... 75-1
Fr ont seat slides guides................................ 75-2
Fr ont seat armature...................................... 75-3
76 REAR SEATS FRAMES AND RUNNERS Rear bench................................................... 76-1
B ench seats .................................................. 76-2
77 FRONT SEAT TRIM Seats upholstery dismounting...................... 77-1
Back rest upholstery dismounting................ 77-2
78 REAR SEAT TRIM Seats upholstery dismounting...................... 78-1
Back rest upholstery dismounting................ 78-2
80 BATTERY - FRONT HEADLIGHTS Battery... ...................................................... 80-1
Head lamp asse mb ly..................................... 80-4
F og lamps.................................................... 80-5
Bulbs r eplacement....................................... 80-6
Headlamps adjustment................................. 80-7
81 REAR AND INTERIOR LIGHTING Bulbs r eplacement........................................ 81-1
Bulbs ............................................................ 81-2
Diagnostic.................................................... 81-3
Cockpit fuse box.......................................... 81-6
82A HORN - ENGINE IMMOBILISER Gene ralities.................................................. 82A-1
Key head repla ceme nt.................................. 82A-6
E.C.U. decoder repla ceme nt........................ 82A-7
Antistarting bushing replaceme nt................ 82A-8
RF remote control for blocking/unlocking
t he doors...................................................... 82A-9
Electric control unit injection repla cement... 82A-10
Pr ocedures.................................................... 82A-11
Diagnostic..................................................... 82A-17
vnx.su

75
FRONT SEATS FRAMES AND R UNNERS
75-1
CO
NTROL/ADJUSTMENT
The front seats, equipping DACIA NOVA vehicles, have two possibilities of adjustment:
- front or rear longitudinal movement ,which can be performed by lever’s operation (1);
- seat back overturning up to the horizontal position, by rotating the round button (2).
DISMOUNTING
For dismounting, the seat will be placed in the middle position by lever’s (1) lifting and per-
form the following operation s:
Remove the lateral cross bar protector (3) by dismounting the metal screws (4 ) .
Dismount screws (5), which are fixing the seat on the central and lateral cross bar.
Release the front seat.
REMOUNTING
Perform in the reverse order the dismounting operations.
41
2
3
FRONT SEATS
vnx.su