2004 DACIA SUPERNOVA fuel pump

01 SPECIFICATIONSEngine – Clutch - Gearbox............................. 01-1
Vehicle identification.. ................................. 01-2
02 LIFTING Mobile jack - Protection route;....................... 02-1
Elevator positioned under the carriage body... 02-3
03 TOWING All types.......................................................... 03-1
04 LUBRICANTS CONSUMABLES Condition....................................................... 04-1
05 DRAINING – FILLING Engine............................................................ 05-1
Gearbox.......................................................... 05-2
07 VALUES AND SETTINGS Dimensions..................................................... 07-1
Capaci ty - Qualities........................................ 07-2
Driving belts tightening and accesorie s.......... 07-3
Distribution belt tension................................. 07-4
Cy linder head tightening................................ 07-5
Wheeles and tyres........................................... 07-6
Br akes............................................................. 07-7
Dimensions under carriage body.................... 07-8
C hecking values of the fr ont axle angles........ 07-9
C hecking values of the rear axle angle s......... 07-10
10 ENGINE AND LOWER ENGINE UNITS Ingredients...................................................... 10-1
Motor-propelling group.................................. 10-2
Separation - Dismantling................................ 10-7
Characteristics................................................ 10-10
Rec overy engine.............................................10-17
Lowervcrankase..............................................10-37
Oil pump........................................................ 10-38
Tightening moments....................................... 10-39
11 UPPER AND FRONT ENGINE UNITS Distribution belt............................................. 11-1
Cylinder head fi tting....................................... 11-3
12 FUEL MIXTURE Characteristics................................................ 12-1
Cl apper body .................................................. 12-4
Intake cole ctor................................................ 12-5
Exhaust collector............................................ 12-6
13 PUMP SUPPLY
Br eaking fuel supply ..................................... 13-1
Injection pump............................................... 13-2
Petrol filter.................................................... 13-3
P upm flow...................................................... 13-4
Supply pressure.............................................. 13-5
14 ANTI-POLLUTION Petrol vapours-aspiration ............................. 14-1
16 STARTING AND CHARGING Alternator....................................................... 16-1
Starter............................................................. 16–7
17 IGNITION AND INJECTION Ignition system.............................................. 17-1
Sparking plugs.............................................. 17-2
Peculi arities.................................. ................ 17-3
Placi ng of elements........................................ 17-4
Idling regime adjustment............................... 17-9
Adjustment of the fuel mixture enriching...... 17-11
Enriching adaptive correction....................... 17-12
Diagnosing-Introduction... ............................ 17-15 Diagnosing-Interpreting the defects.............. 17-17
Diagnosing-Conformity test........................... 17-49
Diagnosing-Interpreting the states................. 17-55
Diagnosing-breakdown localization
algorithm....................................................... 17–66
19 COOLING - EXHAUST - FUEL TANK Characteristics............................................... 19-1
Filli ng and draining ...................................... 19-2
C ontrol.......................................................... 19-3
The schema.................................................... 19-4
Ra diator dismounting and remounting.......... 19-5
C ooling fan replacement
for vehicles with air conditioning................. 19-6
C ooling fan diagnostic
for vehicles with air conditioning................. 19-7
Re sist ance cooling fan replacement
for vehicles with air conditioning................. 19-9
C ooling fan replacement
for vehicles without air conditioning............ 19-10
C ooling fan diagnostic
for vehicles with air conditioning.................. 19-11
Water pump .................................................. 19-12
Dismounting - remounting exhaust................ 19-14
Emptyng of tank............................................ 19-16
Tank fuel description..................................... 19-17
Tank fuel....................................................... 19-20
Electric petr ol pump...................................... 19-21
20 CLUTCH Identification................................................. 20-1
Diagnostic.. ................................................... 20-3
Clut ch disc mechanism.................................. 20-9
Moteur et peripherics
General poinds vehicle0
1
vnx.su

ENGINE E7J-A-2/6012
FUEL MIXTURE
DENOMINATION PARTICULARITIES
Computer 90-ways connector
Injection system Multi-point sequential
Ignition PINIS R
W
Static wi th a double coil
Computer controlled ignition R
A-B1W
R
A-C0,5 W
R
B-C0,5 W
R
1-47+/-1KW
R
2-37+/-1KW
Detonation se nsor Piezoelectric type SAGEM
Tightening moment = 2 daNm
RPM SENSOR ELECTRICFIL or SIEMENS R = 200......270 W
Spark plugs EYQUEM - type RFN 58 LZ
CHAMPION - type RC 87 YCL
Fuel filter For EURO 96:
Attached under the vehicle in front of the fuel tank
Replacement on the occasion of the scheduled inspections
For EURO 00:
Into the fuel tank, attached on the fuel pump assembly.
It is no t replaced separate.
Fuel pump Immersed in the fuel tank
For EURO 96: - Flow: 1,3 l/min - Pressure: 3 bars at 12V tension
For EURO 00: - Pressure: 3,5 bars at 12V tension
Pr essure controller For EURO 96:
Pressure controller attached on the injection ramp
Controlled pressure: - 3 +/- 0,2 bars at zero depression- 2,5 +/- 0,2 bari at a depression of 500 mbars
For EURO 00:
Mounted into fuel tank on the fuel pump assembly
Controlled pressure: 3,5 bars
El ectric injectors SIEMENS
R = 14,5 +/- 1 W la 20
0C
+ 12 V supply
Step by s tep engine R
A-D = 52 +/- 5 W
R
B-C = 52 +/- 5 W
12 - 2
CH ARACTERISTICS
vnx.su

E7J-A-2/60 ENGINE13
PUMP SUPPLY
AIM:
To avoid accidental fire s owing to fuel leaks, which can be caused by an accident.
F
UNCT IO NING:
The shock-sensor lies in the engine compartment: it is mounted on the left-side shock-
absorber column. Du ring a shock, the ball of the sensor goes out of its slot, a nd thus achieves the breaking
of the electri c c ircuit be tween the relay commanding the petrol-pump and t he pe trol-pum p
itself.
PLACING B ACK THE SH OCK-SENSOR IN OPERAT IONAL MO DE
In order to resume the functioning of t he shock-sensor it will suffice to press its top,
and thus replace the ball in its former position. BREAKING FUEL SUPPLY
13 - 1
vnx.su

E7J-A-2/60 ENGINE13
PUMP SUPPLY
CAU T ION!
When th e fuel circuit is opened, any
pe trol jet due to residue pressure must
be averted by mea ns of a gauze.
DIS M O UNT ING
The battery is disconnected.
The air-filter is taken out.
To disconnect:
-no. 1 fuel supply tube;
-no. 3 return fuel tube;
-no. 4 pressure-regulator tube.
Injection ramp Screws no. 2 are taken off.
The ramp is taken apart .
In orde r to t a ke a p ar t a n i n j ect o r,
w ithdraw c lamp no. 5 and then pull t he
injector.
RE-MO UNT ING
Replace t he t orric fittings at the base of
the i njectors (if t he i njector has been taken
apart as well a s the fitting at the end of t he
injector). For the supply junctions and the return
petrol tubes to be c orrectly coupled a click
must be heard the moment the coupling is
done.
The rest of the ope rations are done in
the reverse order a s that of the taking a part.
INJECTION RAMP
13 - 2
vnx.su

E7J-A-2/60 ENGINE13
PUMP SUPPLY
LOCAT IO N
The petrol filter i s mounted under the car, in front of the petrol tank.
PETROL FILTER
13 - 3
REPLACE MENT
The replacement of the petrol filter i s recommended for a ny ove rhauling or for max.
20,000 kilometers.
CAUTION!
When the fuel circuit is opened, any petrol jet due to residue pressure
mu st be averted by means of a gauze.
DIS M O UNT ING
Before every taking-a part operation, prevent fuel from leaking.
Clamps no. 1 are pushed and the speedy junctions are disconnected.
Screw no. 3 is taken off and the petrol filter i s taken apart.
R
E-MOUNT ING
Ob serve the flowing direction of the fuel (which is shown by an arrow inscribed on
the filter).
Connect the speedy junctions back, by hand-pushing.
A correct coupling of the speedy junctions is ensured when there is a click at the
moment of the coupling.
vnx.su

E7J-A-2/60 ENGINE13
PUMP SUPPLY
SPE CIAL DE VICE S
Tu ning pincers “CLIC”
It is recommendable to do the inspection
of the fuel pump-fl ow through t he re turn fue l
hose which is connected on the pump-level
transmitter set.
I
MPORTANT!
During these operations it is compul-
sory:
-not to smoke or handle incandes-
cent obje cts at the working place;
-to ensure protection from the petrol
projections due to residue pressure left in
the ch anneling during the taking-apart.
PUMP-FLOW INSPECTION
The re turn c hanneling no. 1 of the fuel
supply is disconnected.
A hose is connec ted on the junct ion
whose end i s introduced in a gra ded ve ssel
(from 0 to 2000 ml) Term inals 3 and 5 of H relay (lying in
the fuse-box of t he motor-compart ment) of
the petrol pump are shunted. Within a minute, the fl ow of t he pump
must be min. 1.3 lite r at the voltage of 12
V .
If the fl ow is not corre ct, the suppl y
voltage of the pump is inspected (t he flow
d ecreases by approx. 10% for a 1 V
voltage-decre ase).
13 - 4
1
PUMP FLOW
vnx.su

E7J-A-2/60 ENGINE13
PUMP SUPPLY
SU PPLY PRESSURE CONTROL
SPECIAL DE V I C E S
MOT 1311-01 Control Kit for
petrol pressure
MOT 1311-04 J Junction
MOT 1311-06 Junction-disconnect
ing device
CAUTION!
When the fuel circuit is opened, any
petrol jet due to residue pressure must be
averted by means of a gauze.
The air-filter is taken apart .
The fuel supply hose is disconnected.
The MOT 1311-04 deri vation junction
is connected onto the ramp, then the fue l-
s upply channelling is re-connected onto the
junction.
Te rm inals no. 3 and 5 of the H fuel-pump
relay (l ocated in the engine fuse -box) a re
shunted.
Pressure must be 3+/-0.2 bar.
By applying a 500 mbar depression on
the pressure-regulator, the pre ssure of the
fuel must be 2.5+/-0.2 bar.
13 - 5
MOT. 1 311 -0 4 MOT. 1 311 -0 1
The manometer 0-10 bar, as well a s the
flexible hose MOT 1311-01 are mounted.
SU PPLY PRESSURE
MOT. 1 311 -0 6
vnx.su

E7J-A-2/60 ENGINE17
IGNITION AND INJECTION
17 - 5
8. Injection calculator;
9. Shock-sensor;10. Revoluti on sensor;
11. Water-temperature sensor.
9
8
1
11
The fo
llowing relays can be identified in the fuse-box;
B = M otor-ventilator group relay (with Air-Conditioning)
H = Fuel-pump relay
C = Motor-ventilator group relay (without AC).
PLACING OF ELEMENTS
vnx.su