81
REAR AND INTERIOR LIGHTING
81 - 1
BULBS REPLACEMENT
BULB REPLACEMENT OF THE REAR TURNING, PARKING AND BRAKE STOP LIGHT
Disconnect the battery.
Push towards interior the two attachment clips (1 ), then extract the plastic cap (2).
Disconnect the connector (6).
Push upwards the attachment clips (3) of the printed circuit plate (4), swing it and pull out the
plate from the attachment shoulders (5).
For remounting perform the dismounting operations in the reverse order.
FOG LAMP BULB REPLACEMENT
Di smount the attachment scre ws (1) of the
fog lamp glass and remove the glass;
Remove the burnt bulb and replace it.
REPLACEMENT OF THE LICENSE PLATE LAMP BULB
Dismount the lamp attachment screws.
Replace the burnt bulb.
For remounting, perform the dismounting operations in the reverse order.
vnx.su
REAR AND INTERIOR LIGHTING
81
81 - 2
BULBS
Hugh/low beam lights Two phases bulb R2-12V-40/45 W
He adl a mp swith flange holder P45t41
Parking lights Bulb 12V-4W with holder BA 9s
Front turning lamp Bulb 12V-21W (colored) with holder BAU 15s
Fog lamps Halogen bulb H3, 12V-55W with holder Pk22s
Rear Parking, stop lights Bulb 12V-21/5W with holder BAY 15d
lamps Turning and reverse driving Bulb 12V-21W with holder BA15s
Rear fog lamps Bulb 12V-21W with holder BA 15s
Lamps: side signaling, trunk lighting Bulb 12V-5W with holder W2,1x9,5
License plate, ceiling, document compartment Bulb SOFIT 10 x 35 type AS02; 12 V-5W
lamps with holder Sv 8,5
Lamp STOP-S3 on the ceiling Bulb 12V-21W type C21W with holder Sv 8,5
Instrument panel Bulb 12V-1,2W holderW 2 x 4,6d BULBS
vnx.su