MECHAN ICAL ELEMENTS CONTROL
37
The working principle of this control is similar to the one of a brake control, having the same
wo rking fluid : SA E J 1703 DOT 4.
TRANSMITTER CYLINDER REPLACEMENT
DISMOUNTING
Disconnect the battery.
Drain the clutch control hydraulic circuit ; for this purpose, open the purging connection and
connect to this a transparent hose for draining. Dismou nt :
- dashboard lower pa rt ;
- the feeding pipe 1 with brake fluid from the reservoir;
- the hydraulic pipe of the transmitter cylinder 2.
Detach the cylinder rod from the control pedal bolt (dismounting effort : min 5 daNm ).
Di smount the transmitter cylinder 3 as follows: by means of 24 mm wrench, rotate the
transmitter cylinder from the right to the left aprox. 45 ° and extract the cylinder ( dismounting
moment : min 0.2 daNm ).
37 - 19
CLUTCH HYDRAULIC CONTROL
vnx.su
