Page 169 of 933
19 - 9
19
COOLING - EXHA U ST - FUEL TANK
RESISTANCE COOLING FAN REPLACEMENT
for vehicles with air conditioning
De scription of t he opera tion :
Di sconnect the battery (-) term inal.
Di sconnect the resistance connector.
Di smount the two attachment screws of the re sistance.
Position the new resistance assembly.
Mount the two attachment screws of the resistance (tightening moment 4.5 Nm).
Connect the resistance connector.
Connect t he battery (-) terminal. In case the vehicle is equipped with programmable
radio-cassettes player, electronic clock, etc, those are to be re-programmed before return-
ing the vehicle to the client. Check the engine motor fa n operation.
vnx.su
Page 463 of 933

REAR AND INTERIOR LIGHTING
81COCKPIT FUSE BOX81 - 6
DISMOUNTING
Disconnect the (-) plug of the battery.
Turning the button
(4) open, then carefully remove the access little door (1) to the fuse box,
placed under left side dashboard. Dismount the attaching screws (2) of the fuse box on back of the little door.
Rotate the fuse box in order to have access at the connectors of its back then carefully discon-
nect the wiring connectors. If it is necessary the replacement of the module (3 ) attached on the
fuse box, for the fuses F11 – F16, first note the position of the wires connected to these fuses,
then perform the wires disconnecting .
Remove the fuse box.
REMOUNTING
Connect the wiring connectors to the fuse box printed circuit. Observe the form correspon-
dence of each connector with its drawing, marked on the printed circuit of the fuse box. Connect the wires corresponding to the fuses F11 – F16, if those have been previously disconnected.
Position the wires appointed for the fuses F11- F16 and the module (3) of those fuses, then
attach the fuse box on the back of the access little door (1).
Carefully mount the fuse box access little door, then close it.
Connect the (-) battery plug.
Perform functional tests, noticing the correct operation of all consumers supplied by means of
the cockpit fuse box.
OBSERVAT ION
For vehicle equipped with radio-tape player, after battery reconnecting, the radio
code must be introduced, in order to make it again running.
1
4
vnx.su
Page 548 of 933

86
RADIO
GENERAL
1. ON / OFF
2. K eys < and > allowing c onfiguration
changing
3. K eys + and – allowing adjustment
changing
4. K ey “ source”.
The auto radio may be fitted in radio-
cassettes version with the possibility of a CD
controllin g.
86 - 1
13
2 4
The auto radio is ensuring
the following functions:
- radio listening ( on FM four geographical areas may be programmed)
- displaying of the station name in RDS on the best transmitter ( AF function).
- receiving of traffic information ( TA function )
- receiving of short information and emergency announcements ( PTY NEWS).
Radio function - on FM four geographical areas may be programmed
The radio receiver is using three selection modes that may be seen on the screen and approached
on the radio front side: - manually ( MANU )
- by pre-selection (PRESET )
- in alphabetical order (LIST)
Ca ssettes player
This function is completely automatic, immediately the source has been selected.
NOTE : only Dolby and both direction unwinding, with t he bl ank searching( empty
spaces), are approachable by means of specific keys.
OBSERVATION : function MUTE by vocal synthesis or telephone, is stopping the cassette
playing.
Thermal protection
If the ra dio temperature is too high for an opt imal operation, the volume is automatically
reduced ( without modification of the volume on the display ).
vnx.su