2004 DACIA SUPERNOVA width

VALUES AND SETTINGS
07DIMENSIONS , WEIGHTS
07 - 1
DIMENSIONS (mm)
Total length (B) 4030
Total width (G) 1640
Total height (H) * em pty 1395
* with lifted hatchback (H1) 1940
Wheel base (A) 2475
Front wheel track width (E) 1410
Rear wheel track width (F) 1345
Ground clearance (K) * loaded 134
Hatchback free height (Q) 925
Turning radius * Between footways 4950
* Between walls 5000WEIGHTS (kg)
Unloaded vehicle weight: * on the front axle 545
* on th e rear axle 405
* total 950
Maxi mum authorized load
* on the front axle 715
* on th e rear axle 670
* total 1385
Authorized payload 425
Load w ith trailer with own brake 815
Load w ith trailer without own brake 450
vnx.su

VALUES AND SETTINGS
07BRAKES
Vehicle
DACIA
SupeRN ova Normal
20 Minim
19 Normal
228 Maxim
229 Front
0,1 Rear
-
The width of brake disk and drums diameter (mm)
Front Rear The maxim axial run out
of disk
Vehicle
DACIA
SupeRN ova Normal
14 Minim
7 Normal
5 Minim
0,5 mm
above the r ivets SA
EJ 1703 DOT 4
The thickness of gaskets (mm)
Front Rear Brake fluid
07 - 7
vnx.su

30
GENERAL
30 - 6
COMPOSITION AND DIMENSIONS OF THE MAIN BRAKING
SYSTEM ELEMENTS
Front brake
Brake caliper bore diameter F 54 mm
Aer ated bra ke disk diameter F 235 mm
The axial run out of the disk measured at Æ215 0,1 mm
Brake disk m aximum thickness 20 mm
Brake disk minimum thickness 19 mm
Braking pad thickness (support included) 14 mm
Minimal brake pad thickness (support included) 7 mm
R ear brake
Wheel braking cylinder bore diameter F 22 mm
Ne w drum diameter F 228 mm
Dr um diameter aft er grinding F 229 mm
Shoe braking lining width 40 mm
Braking lining thickness 5 mm
Minimal accepted braking lining height above rivets 0,5 mm
Master brake pump cylinder
Bore diameter 20,6 mm
Pump maximum stroke 32 mm
Brake fluid reservoir Without level alert sensor
Pressure limite r For parallel circuit
Ser vobrake master vac 7” 177,8 mm
vnx.su

30
GENERAL
30 - 11
BRAKING SYSTEM DIAGNOSTIC
II.
CONSTANT EFFECT AT BEHAVIOUR
EFFECTS
Brakes not accomplishing the
required braking distance
Vibrating brakes
When braking, the vehicle ( front
p art) is left/right deviating
Braking
Heating brakes POSSIBLE CAUSES
- No n- un if o rm wo rn brake lin ings
(backing off);
- Brake linings slightly greased;
- Springs with modified characteristics.
- Brake disks with high wobbling;
- Inconstancy brake disks width;
- Particles abnormal deposit on brake disks
(oxidation between linings and disk).
- Front axl e suspension, steering (to be
checked);
- Stuck piston;
- Tires – wear, inflati on pressure;
- Rigid duct narrowed (flattening).
- Stuck piston;
Automatic adjustment : hand brake cable very
tighten.
REMARK :
Automatic recovering is performed by
means of the brake pedal, if there is no ab-
no rm al t ensi on in the hand brake cable
when released (hand brake released).
- Return spring.
- Insufficient hydraulic stroke of the brake
pump, not allowing the return at rest of
the brak e pump pistons ( brake pump
remaining under pressure);
- Stuck pistons or hardly returning;
- Rigid duct narrowed (flattening);
- Def ective adjustment of the hand brake
control.
vnx.su

35
WHEELS AND TYRES
CARACTERISTICSRIMS
The wheels identification marking is represented in two ways:
- engraved marking for steel rims
- cast marking for aluminum rims
The marking enables acknowledgment of the main wheels dimensions criteria. This marking
may be:
complete,
Example: 5
1/2 B 13 4 CH 46 ; 5 1/2 J 13 4 H2 46
or simplified,
Example: 5
1/2 B 13 ; 5 1/2 J 13 H2
The wheel bolts (studs) are situated on a diameter of 100 mm.
Maximum axial runout : 1 mm measured on the rim edge ( in G ).
Maximum radial runout : 1 mm measured on the supporting side of the tires beads.
AB C D EF
Whe els Width The rim Æ Nominal Number of Tire Offset
type (in inches) edge profile rim (in inches) wholes under staffing profile (in mm) the tire bead
5
1/2B13 5 1/2B1 34C H46
4 CH48
5
1/2J13 5 1/2J1 34H 246
4H 2
35 - 1
vnx.su

WHEELS AND TYRES
35CARACTERISTICS
1 - 165 - Tire width in mm ( 1 )
2 - 70 - h / l height / width ratio;
4 - R - Radial structure
5 - 13 - Inner diameter in inches (Æ) ;
this is corresponding with the rim diameter
6 - 79 - Charging index
3 - T - Speed index max. 190 km/ h
Symbols speed
M ax speed
R 170
S 180
T 190
U 200
H 210
V 240
ZR more than 240
Stru cture types :
D iagonal No marking
Radial R
D iagonally belted B
TIRES
Identification marking examples: 165 / 70 R 13 79 T
165 / 70 R 13 79 T
1 2 4 5 6 3
35 - 2
vnx.su