71
INTRENAL BODY TRIM
72 - 6
DISMOUNTING
Push the unlocking buttons and swing out
the bench seat back. Dismo unt the attachment screw (1) of the rear
p assage covering (2) on the lateral frame lining.
Remove the rear passage covering below
the rear side panel gasket.
REMOUNTING
Per f o r m in the reverse order the
dismounting operations. RE
AR PASSA GE COVERING
vnx.su
76
REAR SEATS FRAMES AND RU NNERS
76-1
The rear bench is composed of two separated swinging seats, unequal and two separated,
unequal, swinging back rests.
DISMOUNTING
Di smount the seats, by swinging and by removing them from the welded supports on the
carriage body.
For the back rests dismounting perform the following operations: - lift the unlocking buttons (1), and swing out the back rests a head.
- dismount the four screws for the attachment of hinges on the wheels’ passage.
- remove the back rests from the central hinge
REMOUNTING
Perform in the reverse order the dismounting operations.
REAR BENCH
vnx.su
