2004 DACIA SUPERNOVA height adjustment

VALUES AND SETTINGS
07C HECKING VALUES OF THE REAR AXLE ANGLES
07 - 10
ADJUSTMENTSNot adjustable
Not adjustable
REAR AXLE
POSITION
Rele ase
Rele ase
H4 - H5 = 20
VALUES
0
0 ... 00 30’
1 +/- 0,5 mm
ANGLES
CAMBER ( nega tive)
P ARALLELISM
( toe in )
TIGHTENING POSITION
OF TH E ELASTIC
BUSHINGS
For the values checking of the front axle angles, consequently the rear axle angles, the vehicle
must:
- to be placed with the wheels on the rotating plates ( of the bench ) being in horizontal plane;
- to ensure its braking;
- to check its suspension for vehicle setting at its free height;
- to compress its front axle at half loading ( by means of the compressing device DIR 500);
- to check its suspension for vehicle setting at its free position;
- steering brought at middle point and the steering box blocked in this position;
These op erations are followed by the optical device attachment on the vehicle, observing the
instructions of the steering angles checking bench manufacturer.
vnx.su

ENGINE E7J-A-2/6010
10 - 10
ENGINE AND LOWER ENGINE UNITS
Combustion head height113 +/- 0,05 mm
Maximum distor tion of the plane of the fitting0,05 mm
No rectifi cation is authorized
Vo l u m e c h a m b e r s (with valves and spark plugs)26,25 cm3+/-0,6
Couple of spark plug tightening 2,5 - 3 daNm
VA L V E S
Diameter of base 7 mm
Angle of sealing face -intake 120
0
-exhaust 900
Diameter of platter
-intake 37,5+/-0,1 mm
-exhaust 33,5+/-0,1 mm
CHARASTERISTICS
C OMBUSTION HEAD
The combustion head is not restricted. Adjustment of rocker a rms is done only in cool
mode, and onl y when t here are engine interventions which have an i nfluence on their play. The adjustment values are:
-for intake: 0.10
-for exhaust: 0.25
vnx.su

30
GENERAL
30 - 18
PRELIMINARY CHECKING
Due to the geometr ic conception of the front axle, the modificati on of one of one-
si de angles (castor, camber, ball joint) has no major impact on the value of other side
angles (the parallelism being the one directly influenced). The m odification of t hese a ngles doe s not oc cur duri ng vehicle exploitation, but onl y as
a consequence of a vehicle accident.
It is import ant to observe the following sequence : - placing the vehicle on rotating plates;
- braked vehicle
- suspension checking for pl acing the vehicle at its free height;
- establishing the steering centra l point and steeri ng box blocking.
- attachment of the optical devices on the vehicle, observing the manufacturer
instructions.
REPARTITION CHECKING AND ADJUSTMENT
Check the “ X” dimension symmetry of
the connecting rods.
Reading of t he “ A” value on the scale.
vnx.su

30
GENERAL
30 - 21
DIAGNOSIS
THE DEVIATION TO THE LEFT OR TO RIGHT AT STABLE SPEED
Pe rform the preliminary checking:
Wheels (front, rear) : Joints clearance:
- pressure - bushings
- dimensions
- types Checking points heights
- balancing - simetri e
A.m.
conditions
are respected
Correct the defi cient
The deviation persists
Checking fi nished
Check the front axle
steering geometry
The deviationpersists
NO
YES
NO
YES
YES
Check the rear axle
parallelism and the alignmentA
Checking fi nished
NO
C HECKING OF THE FRONT AXLE ADJUSTMENT
vnx.su