33
REAR BEARING ELEMENTS
SHOCK ABSORBER
TIGHTENING MOMENTS
Shock absorber inner attachment nut 8
Shock absorber upper attachment nut 1,45+/-0,3
NOTE
The storage of the shock absorbers in the
s pare part s shops i s made i n hori zontal
position.
In these conditions, the shock absorbers,
which are vertically functioning, may de-
st rike.
So, it is enough that before mounting on
the v ehicle, t o proceed on striking the shock
absorbe rs by al t ernat i ve movi ng up and
down of the shock absorber rod in vertical
position.
1. Upper attachment nuts
2. Protector
3. Upper buffer
4. Inner attachment screw.
DISMOUNTING
Remove the shock absorber prot ector (2).
Di smount the upper attachment scre ws (1) (through the trunk).
Loosen the scre ws of the wheel.
Di smount the wheel.
Lift the vehicle by means of an elevator and dismount the inner attachment scre w (4).
Di smount the shock absorber.
REMOUNTING
Pe rform in reverse order the dismounting operations.
Remount: - the shock absorber a t the lower side;
- the shock absorber a t the upper side.
Tighten the nuts at the re quired moment.
33 - 5
vnx.su
MECHAN ICAL ELEMENTS CONTROL
37
ADJUSTMENT OF TH E BRAKE PRESSURE CONTROLLER FORTHE PARALLEL BRAKING SYSTEM
Conditions : -the vehicle on wheels
- empty trunk
- one person on board
ADJUSTMENT
Mount the flexible connection of the FR 501 device at the purging screw of one rear wheel cylinder.
Purge the manometer.
Push the brake pedal to enable reading several times the limiting pressure obtained on the rear
wheels cylinders. Unscrew the adjustment nut (A) to distance it from the pushing rod end (B).
A ct upon the rod end (B):
- by unscrewin g it towards the pushing rod (C) in order to increase the pressure in the rear circuit
- by screwin g it towards the pushing rod ( C ) in order to decrease the pressure in the rear circuit.
Tighten at t he required moment ( 0,35 daNm ) the adjustment nut ( A ) next to the pushing
rod end ( B ) so that between the lever end and t he lever ( D ) a clearance of L = 0,5 mm to be
ensured.
Check several times the limiting pressure obtained on the rear wheels cylinders : 30
+0
bar.
Dismount the manometer and purge the braking circuit.
For the purging of the hydraulic circuit and the pressure control, the FR 501 device is
to be used.
37 - 18-2
BRAKE PRESSURE CONTROLLER
vnx.su
80
BATTERY - FRONT HEADLIGHTS
80 - 8
HEADLAMPS ADJUSTMENT
FOG LAMPS ADJUSTMENT
The fog lamps adjustment is to be performed in the following conditions:
- the vehicle to be placed on a horizontal surface;
- the vehicle has not passengers inside the cockpit or weights in the trunk;
- the tires a re pressurized a t the manufacturer prescribed pressure.
Further on, proceed as follows:
Bring the vehicle at the working place.
Position the adjustment device (headlamp adjustment device – E) in front of an optical center
of a fog lamp.
Switch on the fog lamps.
Rotate the adjustment screw of the fog lamp (D), so that an adjustment of 2 % is obtained and
the separation between the lighted area and the dark one from the adjustment device is located
under the marked line (G).
This adjustment is performed in the same way as for the meeting lights adjustment.
Bring the adjustment device in front of the optical center of the second fog lamp.
Perform the fog lamp adjustment.
Switch off the fog lamps.
G
E
vnx.su
REAR AND INTERIOR LIGHTING
81
81 - 2
BULBS
Hugh/low beam lights Two phases bulb R2-12V-40/45 W
He adl a mp swith flange holder P45t41
Parking lights Bulb 12V-4W with holder BA 9s
Front turning lamp Bulb 12V-21W (colored) with holder BAU 15s
Fog lamps Halogen bulb H3, 12V-55W with holder Pk22s
Rear Parking, stop lights Bulb 12V-21/5W with holder BAY 15d
lamps Turning and reverse driving Bulb 12V-21W with holder BA15s
Rear fog lamps Bulb 12V-21W with holder BA 15s
Lamps: side signaling, trunk lighting Bulb 12V-5W with holder W2,1x9,5
License plate, ceiling, document compartment Bulb SOFIT 10 x 35 type AS02; 12 V-5W
lamps with holder Sv 8,5
Lamp STOP-S3 on the ceiling Bulb 12V-21W type C21W with holder Sv 8,5
Instrument panel Bulb 12V-1,2W holderW 2 x 4,6d BULBS
vnx.su
89A
ELECTRICAL DIAGRAMS
89A - 10
( until 01.06.2001)
NR. ELECTRIC DIAGRAMS DENOMINATION AE1 AE2 AE3
1 ANTI -INTRUSION AE2(O), AE3 O S
2 DOORS CENTRAL LOCKING S S S
3 ANTI-STARTING S S S
4 ELECTRIC LIGHTER S S S
5 CLIMATE CONTROL AE1, AE2 S S
6 CLIMA TE CONTROL AND AIR CONDITIONING AE1(O), AE2(O), AE3 O O S
7 TRUNK LIGHTING S S S
8 CEILING LIGHTING S S S
9 ASHTRAY AND DOCUMENT COMP.LIGHTING S S S
10 CLOCK S S S
11 PRE-EQUIPPING RADIO AE1, AE2 S S
12 PRE-EQUIPPING RADIO AE3 S
13 STARTING CIRCUIT S S S
14 ENGINE COOLING CIRCUIT AE1(series), AE2(series) S S
15 ENGINE COOLING CIRCUIT AE2(O), AE3 O S
16 ELECTRONIC INJECTION AE1(series), AE2(series) S S
17 ELECTRONIC INJECTION AE3 S
18 ALTERNA TOR CIRCUIT S S S
19 MASS SS S
20 MASS AE1 S
21 MASS AE2 S
22 MASS AE2(anti-intrusion), AE3 O S
23 MASS AE1 S
24 MASS AE1(
CA)O
25 MASS AE2 S
26 MASS AE2(
CA), AE3 O S
27 MASS AE1, AE2 S S
28 MASS AE2(anti-intrusion), AE3 O S
29 MASS AE1, AE2 S S
30 MASS AE1(
AC), AE2(CA), AE3 O O S
31 FUSE BOX AND COCKPIT RELAYS AE1 S
32 FUSE BOX AND COCKPIT RELAYS AE1(
CA)O
33 FUSE BOX AND COCKPIT RELAYS AE2 S
34 FUSE BOX AND COCKPIT RELAYS AE2(
CA), AE3 O S
35 FUSE BOX AND ENGINE RELAYS AE1 S
36 FUSE BOX AND ENGINE RELAYS AE1(
CA)O
37 FUSE BOX AND ENGINE RELAYS AE2 S
38 FUSE BOX AND ENGINE RELAYS AE2(
CA),AE3 O S
FUNCTIONAL DIAGRAMS LIST
vnx.su
89A
ELECTRICAL DIAGRAMS
89A - 12
(until 01.06.2001)
21
101
102
103
104
105
107
113
120
121
122
123
124
125
128
137
138
139
140
141
145
146
147
149
155
156
160
163
165
168
171
172
173
175
176
177
180
181
184
185
188
189
190Right signalling anti-return diode
Electric lighter
Ashtr a y
Alternator
Anti-theft system
Acoustic alarm
Battery
Windscreen wiper timer
Injection computer (UCE)
Fog lights switch
Fog headlights switch
Door closing switch
Climate blower switch
Hazard switch
Rear window defrosting switch
Turning signalling relay
Right rear door actuator
Left rear door actuator
Left front door actuator
Right front door actuator
Windscreen wiper-washer switch
Detona tion sensor
Atmospheric pressure sensor
RPM s
ensor
Reverse driving contact
Handbrake contact
St op contact
Starte r
Trunk lighting lamp
Documents compartment lighting lamp
AC compressor clutch
Right rear lamp
Left rear lamp
Left fog lamp
Right fog headlight
Left fog headlight
Left front door contact
Right front door contact
Right front parking lamp
Left front parking lamp
Cooling motor fan
Right rear loud speaker
Left rear loud speakerRight front brake pad
Left front brake pad
Windscreen washing pump
Va l ve potentiometer
Diagnostic socket
Right headlamp
Left headlamp
Fog lamps relay
Fog headlights control relay
Cooling motor fan control relay
Fuel pump control relay
Actuators relay
Injection water temperature sensor
Instrument panel
V ehicle speed transducer
Right front turning lamp
Left front turning lamp
Cockpit fuse and relays box
Radio
Cooling motor fan and AC
Right side signalling lamp
Left side signalling lamp
Injection air temperature sensor
Rear window defrosting timer
Climate control lighting
AC starting button
Motor fan resistance ( f or AC)
Left front ceiling lamp
Right front ceiling lamp
Canister purging valve
UCE anti-intrusion
Engine hood contact
Siren
Vo l u metric sensor
AC relay ( on board)
UCE decoder
Hatchback contact
AC compressor clutch control relay
Engine compartment fuse and relays box
Climate control blower
STOP-S3 l amp
St ep-by-step engine
Anti-starting bushing
216
217
221
222
225
226
227
230
231
234
236
238
244
247
250
255
256
260
261
262
267
268
272
294
298
319
321
328
329
371
427
438
442
454
474
503
560
584
597
600
639
649
654
CODE COMPONENT DENOMINATIONCODE COMPONENT DENOMINATION
ELECTRIC COMPONENTS INDEX
vnx.su
89A
ELECTRICAL DIAGRAMS
89A - 16
Windscreen wiper timer
FLASH relay
Climate control lighting
AC starting button
AC relay ( on board)
Right front door actuator
Right rear door actuator
Right front door loud speaker
Right rear loudspeaker
Fuel level transmitt er and electric pump
Trunk lighting la mp
Left rear loud speaker
Left rear door actuator
Left fron t door actuator
Left fr ont door loud speaker
Right front door contact
Right volumetric sensor
Left vo lumetric sensor
Right front ceiling lamp
Hatchb ack contacts
Handbrake contact
Anti-starting bushing
Le ft front ceiling lamp
Anti-intrusion indicator LED
Left fron t door contact
UCE d ecoder
Siren
Vehicle speed transducer
Engine hood contact
Doors closing switch
UCE anti-intrusion
( until 01.06.2001)
Inje ctor 1
Inje ctor 2
Inje ctor 3
Inje ctor 4
Atmospheric pressure sensor
Detonation sensor
Starter
In jection air temperature sensor
Valve potentiometer
Step-by step engine
Alternator
Ignition c oil
Canister purging valve
AC pressure sensor(pressure controller)
Diagnostic socket
AC compressor clutch
Upstream oxygen sensor
Cooling blower and AC
Blower resistance for AC
Oil pressure contact
Injec tion computer
RPM sensor
Reverse driving contact
AC compressor clutch control relay (E)
Water temperature sensor
Blower lower speed control relay (B)
E ngine compartment fuse and relays box
Motor fan control relay ( C)
Fog headlamps control relay(A)
Fuel pump control relay (H)
Actuators relay(D)
Chock sensor
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32 33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
LOCATION OF ELECTRIC COUPLING ON THE VEHICLE
vnx.su
89B
ELECTRIC DIAGRAMS
89B - 6
Windscreen wiper timer
FLASH relay
Climate control lighting
AC starting button
AC relay ( on board)
Right front door actuator
Right rear door actuator
Right front door loud speaker
Right rear loudspeaker
Fuel level transmitt er and electric pump
Trunk lighting la mp
Left rear loud speaker
Left rear door actuator
Left fron t door actuator
Left fr ont door loud speaker
Right front door contact
Right volumetric sensor
Left vo lumetric sensor
Right front ceiling lamp
Handbrake contact
Anti-starting bushing
Anti-intrusion indicator LED
Left fron t door contact
UCE d ecoder
Siren
Vehicle speed transducer
Engine hood contact
Doors closing switch
UCE anti-intrusion
( after 01.06.2001)
Inje ctor 1
Inje ctor 2
Inje ctor 3
Inje ctor 4
Atmospheric pressure sensor
Detonation sensor
Starter
In jection air temperature sensor
Valve potentiometer
Step-by step engine
Alternator
Ignition c oil
Canister purging valve
AC pressure sensor(pressure controller)
Diagnostic socket
AC compressor clutch
Upstream oxygen sensor
Cooling blower and AC
Blower resistance for AC
Oil pressure contact
Injec tion computer
RPM sensor
Reverse driving contact
AC compressor clutch control relay (E)
Water temperature sensor
Blower lower speed control relay (B)
E ngine compartment fuse and relays box
Motor fan control relay ( C)
Fog headlamps control relay(A)
Fuel pump control relay (H)
Actuators relay(D)
Chock sensor
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32 33
34
35
36
37
38
39
40
41
42
44
45
46
47
48
49
50
51
53
54
55
56
57
58
59
60
61
62
63
LOCATION OF ELECTRIC COUPLING ON THE VEHICLE
vnx.su