LIFTING
02MOBILE JACK - PROTECTION ROUTESSafety sign
(particularly cautions to be observed in case of an intervention)
SPECIAL TOOLS
DENOMINATION CODE
Protection route Cha 280-02
Adjusting socket on mobile jack Cha 408-01 or Cha 408-02
The use of a mobile jack implies the necessity of using protection routes.
It absolutely forbidden the vehicle lifting using the front suspension arms or the rear axle as
supporting points. The following type of m obile jack is using the sockets, the support Cha 408 – 01 or Cha
408 – 02 in orde r to place the route Cha 280 – 02. In order to lift the front or rear part of the vehicle, take as support the lifting points used also
for the vehicle jack.
LATERAL MOBILE JACK
Use the CHA 280 hold.
P lace it on under the threshold at the front door level.
The floor closing plate shall be positioned in the channel of the hold.
02 - 1
vnx.su
LIFTING
02ELEVATOR POSITIONED UNDER THE CARRIAGE BODY
Safety sign :
1. THE DISMOUNTING OF VEHICLE COMPONENTS CASE .
When there are not available four columns elevators, two columns elevators may be used, in
this case, lifting slides shall be placed under the floor closing plate, at the supporting points level
of the vehicle jack.
2. THE PARTICULARLY CASE OF DISMOUNTING – REMOUNTING OF THE
ENGINE-GEARBOX ASSEMBLY.
In this specific case, the vehicle carriage body shall be consolidated with t he two columns
elevator arms using special slides.
These must be obligatory placed at the right of the supporting points of the vehicle jack and
must be locked in the holes/windows made in the floor closing plate.
02 - 3
Front
Rear
vnx.su
