2003 LEXUS LS430 replacement

a. Disconnect the connector and remove the bolt.
b. Pull out the television camera ECU along the stereo component amplifier assy guide toward the
rear of the vehicle to remove it.
If the television camera ECU is not easily removed due to a lack of space between the television camera
ECU and the vehicle, remove the television camera ECU together with the stereo component amplifier
assy (see REPLACEMENT
).
Fig. 28: Removing Television Camera ECU

Courtesy of TOYOTA MOTOR SALES, U.S.A., INC.
7.INSTALL TELEVISION CAMERA ECU
a. Install the television camera ECU by aligning it with the stereo component amplifier assy guide,
and tighten the bolt.
b. Connect the connector.
HINT:
After the replacement, perform the screen noise automatic adjustment when screen noise occurs (see
SCREEN NOISE AUTOMATIC ADJUSTMENT
).

REPLACEMENT
HINT:
See COMPONENTS .
See LOCATION .
Installation is in the reverse order of removal.
1.REMOVE LUGGAGE COMPARTMENT FLOOR MAT (See step 18 on OVERHAUL
)
2.REMOVE DECK TRIM SIDE BOARD RH (See OVERHAUL
)
3.REMOVE REAR FLOOR FINISH PLATE (See step 20 on OVERHAUL
)
4.SEPARATE LUGGAGE COMPARTMENT TRIM COVER FRONT (See step 19 on
OVERHAUL
)
5.REMOVE LUGGAGE COMPARTMENT TRIM COVER ASSY RH (See step 22 on
OVERHAUL
)
6.REMOVE TELEVISION CAMERA ECU (W/ TELEVISION CAMERA) (See REPLACEMENT
)
7.REMOVE STEREO COMPONENT AMPLIFIER ASSY W/BRACKET
a. Disconnect the connector.
b. Remove the 2 nuts.
c. Disen
gage the 2 clips and remove the stereo component amplifier assy with bracket.

Fig. 31: Removing Screws And Brackets
Courtesy of TOYOTA MOTOR SALES, U.S.A., INC.
REPLACEMENT
HINT:

REPLACEMENT
HINT:
See COMPONENTS
See LOCATION
Installation is in the reverse order of removal.
The procedure for the left side is the same as that for the right side. The procedure for right side is shown
below.
1.REMOVE SIDE TRIM BOARD COVER FRONT RH (See OVERHAUL
)
2.REMOVE SIDE REAR CURTAIN ASSY RH (W/ REAR CURTAIN SUB-ASSY) (See step 4 on
OVERHAUL
)
3.REMOVE POWER WINDOW REGULATOR SWITCH ASSY REAR (See step 18 on
OVERHAUL
)
4.REMOVE REAR DOOR INSIDE HANDLE BEZEL RH (See step 3 on OVERHAUL
)
5.REMOVE REAR DOOR TRIM BOARD SUB-ASSY RH (See step 5 on OVERHAUL
)
6.REMOVE REAR SPEAKER ASSY
a. Disconnect the connector.
b. Remove the 3 screws and rear speaker assy.

Fig. 33: Removing Rear Speaker Assy Screws
Courtesy of TOYOTA MOTOR SALES, U.S.A., INC.
REPLACEMENT
HINT:
See COMPONENTS - FIXED , COMPONENTS - POWER ADJUSTER , COMPONENTS -BACK
WINDOW GLASS
See LOCATION
Installation is in the reverse order of removal.
1.REMOVE REAR SEAT CUSHION ASSY RH (See OVERHAUL
- POWER ADJUSTER ,
OVERHAUL
- FIXED )
2.REMOVE REAR SEAT CUSHION ASSY LH (See OVERHAUL
- POWER ADJUSTER ,
OVERHAUL
- FIXED )
3.REMOVE REAR SEAT BACK ASSY RH (See OVERHAUL
- POWER ADJUSTER ,
OVERHAUL
- FIXED )
4.REMOVE REAR SEAT BACK ASSY LH (See OVERHAUL
- POWER ADJUSTER ,

OVERHAUL - FIXED)
5.REMOVE REAR DOOR SCUFF PLATE RH (See REPLACEMENT
)
6.REMOVE REAR DOOR SCUFF PLATE LH (See REPLACEMENT
)
7.REMOVE REAR DOOR OPENING TRIM WEATHERSTRIP RH (See REPLACEMENT
)
8.REMOVE REAR DOOR OPENING TRIM WEATHERSTRIP LH (See REPLACEMENT
)
9.REMOVE REAR SEAT SIDE COVER RH (See REPLACEMENT
)
10.REMOVE REAR SEAT SIDE COVER LH (See REPLACEMENT
)
11.REMOVE ROOF SIDE GARNISH INNER RH (See REPLACEMENT
)
12.REMOVE ROOF SIDE GARNISH INNER LH (See REPLACEMENT
)
13.REMOVE CENTER STOP LAMP ASSY (See REPLACEMENT
)
14.REMOVE REAR SPEAKER GRILLE SUB-ASSY (See REPLACEMENT
)
15.REMOVE PACKAGE TRAY TRIM PANEL ASSY (See REPLACEMENT
)
16.REMOVE STEREO COMPONENT SPEAKER ASSY REAR
a. Disconnect the connector.
b. Remove the 4 screws and stereo component speaker assy rear.
Fig. 34: Removing Stereo Component Speaker Assy Rear Screws

Courtesy of TOYOTA MOTOR SALES, U.S.A., INC.

REPLACEMENT
HINT:
See LOCATION
Installation is in the reverse order of removal.
1.REMOVE INSTRUMENT PANEL SAFETY PAD SUB-ASSY (See step 19 on REPLACEMENT
)
2.REMOVE FRONT NO. 2 SPEAKER ASSY
a. Disconnect the connector.
b. Disengage the clip.
c. Remove the 2 nuts and front No. 2 speaker assy.
d. Perform the same procedure on the other side.
Fig. 35: Removing Nuts And Clip

Courtesy of TOYOTA MOTOR SALES, U.S.A., INC.

REPLACEMENT
HINT:
See COMPONENTS .
See LOCATION .
Installation is in the reverse order of removal.
The procedure for the left side is the same as that for the right side. The procedure for right side is shown
below.
1.REMOVE SIDE TRIM BOARD COVER FRONT RH (See OVERHAUL
)
2.REMOVE SIDE REAR CURTAIN ASSY RH (W/ REAR CURTAIN SUB-ASSY) (See step 4 on
OVERHAUL
)
3.REMOVE POWER WINDOW REGULATOR SWITCH ASSY REAR (See step 18 on
OVERHAUL
)
4.REMOVE REAR DOOR INSIDE HANDLE BEZEL RH (See OVERHAUL
)
5.REMOVE REAR DOOR TRIM BOARD SUB-ASSY RH (See step 5 on OVERHAUL
)
6.REMOVE REAR SPEAKER ASSY NO. 2
a. Disconnect the connector.
b. Remove the 3 screws and rear speaker assy No. 2.