2003 LEXUS LS430 replacement

c. Disconnect the connector and remove the instrument cluster finish panel sub-assy center.
Fig. 12: Removing Bolts And Clips

Courtesy of TOYOTA MOTOR SALES, U.S.A., INC.
8.REMOVE MULTI-DISPLAY
a. Remove the 4 screws and multi-display.
HINT:
After the replacement, perform the screen noise automatic adjustment when screen noise occurs (see
SCREEN NOISE AUTOMATIC ADJUSTMENT
).

Fig. 13: Removing Multi-Display Screws
Courtesy of TOYOTA MOTOR SALES, U.S.A., INC.
REPLACEMENT
HINT:
See COMPONENTS .
See LOCATION .
Installation is in the reverse order of removal.
1.REMOVE LUGGAGE COMPARTMENT FLOOR MAT (See step 18 on OVERHAUL
)
2.REMOVE DECK TRIM SIDE BOARD RH (See OVERHAUL
)
3.REMOVE REAR FLOOR FINISH PLATE (See step 20 on OVERHAUL
)
4.SEPARATE LUGGAGE COMPARTMENT TRIM COVER FRONT (See step 19 on

Fig. 16: Removing Navigation ECU With Bracket
Courtesy of TOYOTA MOTOR SALES, U.S.A., INC.
c. Remove the 4 screws and 2 brackets.
HINT:
After the replacement, perform the screen noise automatic adjustment when screen noise occurs (see
SCREEN NOISE AUTOMATIC ADJUSTMENT
).

Fig. 17: Removing Screws And Brackets
Courtesy of TOYOTA MOTOR SALES, U.S.A., INC.
REPLACEMENT
HINT:
Installation is in the reverse order of removal.
1.REMOVE RR SEAT CTR ARMREST PANEL

Fig. 20: Removing Screws
Courtesy of TOYOTA MOTOR SALES, U.S.A., INC.
REPLACEMENT
HINT:
See COMPONENTS
See LOCATION .
Installation is in the reverse order of removal.
1.REMOVE LUGGAGE COMPARTMENT FLOOR MAT (See step 18 on OVERHAUL
)
2.REMOVE DECK TRIM SIDE BOARD RH (See OVERHAUL
)
3.REMOVE REAR FLOOR FINISH PLATE
a. Remove the 2 bolts and 2 hooks.
b. Remove the 5 clips.

Fig. 23: Removing Clips And Luggage Compartment Trim Cover Assy RH
Courtesy of TOYOTA MOTOR SALES, U.S.A., INC.
6.REMOVE NAVIGATION ECU W/BRACKET (W/ LEXUS NAVIGATION SYSTEM) (See
REPLACEMENT
)
7.REMOVE STEREO COMPONENT TUNER ASSY W/BRACKET (W/O LEXUS NAVIGATION
SYSTEM)
a. Disconnect the connector.
b. Remove the 2 nuts and stereo component tuner assy with bracket.

REPLACEMENT
HINT:
See COMPONENTS
See LOCATION
Installation is in the reverse order of removal.
1.REMOVE REAR COMBINATION LAMP SERVICE COVER RH (See OVERHAUL
)
2.REMOVE REAR COMBINATION LAMP SERVICE COVER LH (See OVERHAUL
)
3.REMOVE LUGGAGE COMPARTMENT LAMP ASSY NO. 1 (See step 4 on OVERHAUL
)
4.REMOVE BACK DOOR TRIM COVER (See step 5 on OVERHAUL
)
5.REMOVE LUGGAGE OPENER CANCEL CYLINDER & KEY SET (See OVERHAUL
)
6.REMOVE LUGGAGE DOOR OPENING SWITCH ASSY (See OVERHAUL
)
7.REMOVE LUGGAGE COMPARTMENT DOOR GARNISH SUB-ASSY OUTSIDE (See step 5 on
REPLACEMENT
)
8.REMOVE TELEVISION CAMERA ASSY
a. Disconnect the connector.
b. Remove the 2 bolts and television camera assy.
9.INSTALL TELEVISION CAMERA ASSY
a. Install the television camera assy with the 2 bolts.
b. Connect the connector.

Fig. 27: Identifying Television Camera Assy Bolts
Courtesy of TOYOTA MOTOR SALES, U.S.A., INC.
REPLACEMENT
HINT:
See COMPONENTS
See LOCATION .
Installation is in the reverse order of removal.
1.REMOVE LUGGAGE COMPARTMENT FLOOR MAT (See step 18 on OVERHAUL
)
2.REMOVE DECK TRIM SIDE BOARD RH (See OVERHAUL
)
3.REMOVE REAR FLOOR FINISH PLATE (See step 20 on OVERHAUL
)
4.SEPARATE LUGGAGE COMPARTMENT TRIM COVER FRONT (See step 19 on
OVERHAUL
)
5.REMOVE LUGGAGE COMPARTMENT TRIM COVER ASSY RH (See step 22 on
OVERHAUL
)
6.REMOVE TELEVISION CAMERA ECU