2003 FIAT PALIO India Version Owners Manual

88
3) Pull side tabs of the fixing clips C-
fig. 14
; remove the bulb holder and
the relevant bulb.
4) Insert the new bulb, making sure
that the tabs on the metal part coin-
cide with the special grooves in the
headlight dish.
5) Refasten the clip, insert the con-
nector and refit the cover.
MAIN BEAM HEADLIGHTS
To replace a halogen bulb (type H1,
12V-55W):
1) Remove the plastic cover, by
pulling the stop spring.
2) Remove the electrical connector
E-fig. 15.
3) Pull side tabs D-fig. 15of the fix-
ing clip; remove the bulb holder and
replace the bulb.
4)Insert the bulb holder and fix it
through the relevant clip; connect the
electrical connector and refit the cov-
er.
IF AN EXTERIOR
LIGHT BURNS
OUT
DEEP BEAM HEADLIGHTS
To replace a halogen bulb (type H7,
12V-55W):
1)Remove the spring A-fig. 13and
remove the plastic protective cover.
2)Remove the electrical connector
B-fig. 13.
fig. 13
P4E02179
fig. 14
P4E02180
fig. 15
P4E02181
80-103 03/03/2003 06:49 PM Page 88

89
FRONT SIDE LIGHTS
To replace the 12V-5W bulb:
1)Release the spring A-fig . 16and
remove the plastic protective cover.
2)Remove the bulb holder C-fig.
16-17
, by turning it anticlockwise.
3) Remove the bulb by turning it an-
ticlockwise.
4) After having replaced the bulb, re-
fit the bulb holder and the protective
cover.
FRONT DIRECTION
INDICATORS
To replace the 12V-21W bulb:
1) Release the spring A-fig . 16and
remove the plastic protective cover.
2)Remove the bulb holder B-fig.
16-17
, by turning it anticlockwise.
3) Remove the bulb by turning it an-
ticlockwise.
4) After having replaced the bulb, re-
fit the bulb holder and the protective
cover.
FRONT FOGLIGHTS
To replace the halogen bulb (type
H3, 12V-55W).
1) Loosen the fog light fastening
screws
A-fig. 18to the front bumper.
fig. 16
P4E02182
fig. 17
P4E02183P4E02437
fig. 18
80-103 03/03/2003 06:49 PM Page 89

90
FRONT FOGLIGHTS
To replace the halogen bulb (type
H3, 12V-55W).
1) Turn the wheels to the left to re-
place the right-hand light and vice-ver-
sa.
2) Loosen the screws A-fig. 19of
the cover on the wheelhouse and pull
the cover downwards.
3) Disconnect the connectorA-fig.
20
and turn the cover B anticlockwise.
4)release the clip C-fig. 20and re-
move the bulb holder.
5)Remove the bulb and replace it
with an other one of same type and
power
fig. 21.
6)Then insert the bulb holder in its
seat and fix it through clip
C-fig. 20.
7)Refit the cover Bby turning it
clockwise and connect the electrical
connector.
8)Refit the wheelhouse cover and
fix it by using screws
A-fig. 19.
REAR LIGHT CLUSTER
To replace a bulb:
1) From inside the boot, lift the
opening on the covering panel and un-
screw nut
A-fig. 23.
2) Remove the electrical connector
A-fig. 22.
3)
Remove the bulb group fig. 24.
4)Remove the bulbs by pushing
them lightly and turning them anti-
clockwise.
fig. 20
P4E02185
fig. 21
P4E02186
fig. 19
P4E02184
80-103 03/03/2003 06:49 PM Page 90

91
The bulbs fig. 24are:
A- 12V-21/5W for brake lights;
B- 12V-21W for direction indicators;
C- 12V-21W for the reversing lights;
3)Unscrew the screws B-fig. 26
and replace the bulb group C or only
the burnt-out bulb.
D- 12V-21/5W for parking/tail
lights.
THIRD BRAKE LIGHT
To replace the light cluster:
1) With the boot open, loosen the
screws
A-fig. 25 and remove the unit.
2) Disconnect the electrical connec-
tion.
fig. 25
P4E01758
fig. 22
P4E02378
fig. 23
P4E02188
fig. 24
P4E02189
fig. 26
P4E01759
80-103 03/03/2003 06:49 PM Page 91

92
IF AN INTERIOR
LIGHT BURNS
OUT
FRONT CEILING LIGHT
To replace the 12V-10W bulb:
– remove the whole ceiling light
group, pressure-fitted, by levering with
a screwdriver in the direction of the
arrows
A-fig. 28 ;– remove the reflector
A-fig. 29act-
ing in the direction shown by the ar-
rows and replace the cylindrical bulb
B;
– refit the reflector
Aand then the
whole ceiling light group in its seat, by
sligthly pressing.
fig. 29
P4E01656
NUMBER PLATE LIGHT fig. 27
To replace the 12V-5W bulb:
1) Remove the bulb holder by lev-
ering with a screwdriver in the point
A-fig. 27.
2)Remove the bulb Bby turning it
anticlockwise.
fig. 28
P4E01655
fig. 27
P4E02190
80-103 03/03/2003 06:49 PM Page 92

93
BOOT LIGHT
To replace the 12V-5W cylindrical
bulb, remove the transparent element
A-fig. 29by levering with a screw dri-
ver in point indicated by the arrow.
Remove the plastic guard
Band re-
place the bulb.
fig. 31
P4E01428
IF A FUSE BLOWS
REPLACING THE FUSES
If an electrical device is not working,
check whether the respective fuse is
blown
fig. 31.
A- Undamaged fuse.
B- Fuse with broken filament.
Replace broken filament fuse with
undamaged fuse.
Before changing a fuse,
check the ignition key has
been removed and that
all the other electric devices have
been turned off/disabled.
Never change a fuse
with another amperage:
fire risk.
If the problem occurs
again, have the car in-
spected at a Fiat Dealer-
ship.
80-103 03/03/2003 06:49 PM Page 93

94
Fig. 33
A
- Fuse tongs.
The devices protected by the fuses
in the fusebox, are listed in the fol-
lowing tables.
fig. 33
P4E02052
Do not attempt to re-
pair a blown maxi fuse.
Go to a Fiat Dealership.If the fuse blows again,
have the car inspected at
a Fiat Dealership.Never replace a broken
fuse with anything other
than a new fuse. Always
use a fuse of the same colour.
FUSES IN FUSEBOX
The fusebox is located under the
dashboard to the right of the steer-
ing wheel.
To reach the fuses, unscrew the fix-
ing screws
A-fig. 32and remove the
cover
B.
Graphic symbols identifying the elec-
trical component corresponding to
each fuse are shown on the inside of
the cover.
fig. 32
P4E02051
80-103 03/03/2003 06:49 PM Page 94

95
FUSES IN THE ENGINE
COMPARTMENT fig. 34(a, b, c)
-35
The devices protected by the fuses in
the engine compartment are listed in
the following tables.
fig. 35
P4E02274
fig. 34 (a) 1.2 version
P4E02053
fig. 34 (b) 1.6 16V version
P4E02672
fig. 34 (c) 1.9D version
P4E02673
80-103 03/03/2003 06:49 PM Page 95