2002.5 Peugeot 307 Break Owner's Manual

09-09-2002
Zero reset
Your PEUGEOT dealer carries out
this operation after each service.
However, if you carry out the service
yourself, the reset procedure is as
follows: Switch off the ignition,
Press and hold the trip recorder
reset button,
Switch on the ignition.
The display begins a countdown.
When the display shows 0, release
the button; the service symbol disap
pears.
Important: after this operation, if you
wish to disconnect the battery, lock
the vehicle and wait for at least five
minutes, otherwise the zero reset
will not be registered. MAINTENANCE OF PARTS SUBJECT TO WEAR and a check of
consumables
Certain essential components on your vehicle are subject to checks a
t specific
frequencies:
The brake fluid is to be replaced at a maximum of every 36,000/40,000 miles
(60 000 km) or every two years.
The pollen filter must be checked at each serviceby a PEUGEOT dealer
(services and intermediate visits) or more often, depending on the environ
ment (dust, pollution, etc.)
Replacement of the timing belt: consult a PEUGOT dealer.
For the 2 litre HDI turbo diesel engine (110 bhp) , maintenance of the partic
ulate emission filter and topping up of the additive reservoirmust be carried
out at a maximum of every 48,000 miles (80 000 km) , by a PEUGEOT deal
er.
Air bags and pretensioning parts on seat belts must be checked every
10 years.
The check on tyre inflation pressure must be carried out cold at least once a
month.
PEUGEOT SERVICING 21

1st service at 6,000 miles
(10 000 km) or 6 months*.
This is necessary in order to benefit from the warranty.
MILES (KM) 20,000 (30 000) 40,000 (60 000) 60,000 (90 000) 80,000 (12 0 000) 100,000 (150 000) 120,000 (180 000)
09-09-2002
THE SERVICE LEVELS
Each vehicle has its own servicing cycle, based upon the engine type.
This cycle consists of alternating 2 types of service, A and C, int ermediate visits and a few additional operations specific to
your vehicle; these correspond to key stages in the life of your 3 07.
At your first and each subsequent service, your dealer will advise you of the type and content of the next service
due.
PEUGEOT SERVICING
22
MAINTENANCE CYCLE FOR YOUR 307 PETROL ENGINE
Service every 2 years or 20,000 miles (30 000 km) maxi mum
These fixed operations are carried out with synthetically based oil.
Synthetic oil or Fuel economy oil may also be used.
Arduous conditions of use (see corresponding section).
* Whichever comes first. Intermediate visit.

09-09-2002
60,000 (100 000) 72,000 (120 000) 84,000 (140 000) 96,000 (160 000) 108,000 (180 000)
MILES (KM) 12,000 (20 000) 24,000 (40 000) 36,000 (60 000) 48,0
00 (80 000)
PEUGEOT SERVICING23
MAINTENANCE CYCLE FOR YOUR 307 DIESEL
Service every 2 years or 12,000 miles (20 000 km) maxi mum
1st service at 6,000 miles
(10 000 km) or 6 months*. This is necessary in order to benefit from the warranty.
+ maintenance of particulate
emission filter
2.0 l HDI 110 bhp + maintenance of
particulate
emission filter
2,0 l HDI 110 bhp
These fixed operations are carried out :
with synthetically based oil, synthetic oil or Fuel Economy oil .
with 5W40 oil for HDI Turbo Diesel engines fitted with aparticulate emission filter.
Arduous conditions of use (see corresponding section).
*Whichever comes first. Intermediate visit.

09-09-2002
Arduous conditions of use
• Continuous doortodoor use.
• Town use (e.g. taxi).
• Repeated short journeys, with the engine cold at low te mperatures.
• A prolonged stay under the following conditions: – countries with temperatures often above +30 °C,
– countries with temperatures often below –15 °C,
– countries with a dusty atmosphere,
– countries whose lubricants or fuels do not conform to our recommen dations.
Recommendations:
– replace the air filterevery 24,000 miles (40 000 km) for petrol engines and every 27,000 miles (45 000 km) for diesel
engines,
– for replacement of the timing belt: contact a PEUGEOT dealer.
PEUGEOT SERVICING
24

09-09-2002
PEUGEOT SERVICING25
A AND C SERVICE LEVELS AND THE INTERMEDIATE VISIT
Level
Operations Description of operation 1st Service
A C Intermediate
DRAIN/REFILL Engine oil Bleed fuel filter (diesel) Oil filter Fuel filter *(petrol)REPLACE Fuel filter element (diesel) Air filter element Spark plugs (petrol) Engine oil (check + topup) Manual gearbox oil (check + topup) Battery (check + topup) if cap is removableLevel Screen wash (check + topup) Coolant (check + topup) Brake fluid (check + topup) Power steering fluid (check + top up according to specification) Operation of lights and indicators Condition of glass, headlamp and light lenses and mirrors Horn Windscreen washer jets Condition of wiper blades Condition and tension of the ancillary drive belts Handbrake Condition of hydraulic circuits (hoses and covers)CHECK Condition of rubber boots and gaiters Brake pads Play in hubs, link rods, ball joints, flexible mountings Shock absorbers Rear drum brake lining wear. Condition and pressure of tyres (including spare wheel) Emission control check as per current legislation (petrol) Smoke opacity (diesel) Pollen filter (according to specification) Visual check of the whole vehicle
SERVICE* Courtesy vehicle
ROAD TEST
: All driving conditions: Arduous conditions * According to country.

(1) Minimum grade: Petrol engines ACEA A3 and API SH/SJ; Diesel engines ACEA B3 and API CF/CD. ACEA= Association des Constructeurs Européens Automobiles
(Association of European Automobile Manufacturers). API = American Petroleum Institute.
If oil is used which does not conform to the ACEA A3B3 standards, this requires the "Arduous Conditions" servicing schedule to be followed, which involves shorter intervals between services.
*This Fuel Economy oil can only be used in engines designed f or its use.
Use 5W40 oil only for HDI Turbo DIesel engines fitted wit h a particulate emission filter.
26TRADE NAMES OF APPROVED AND RECOMMENDED ENGINE LUBRICANTS IN EUROPE (1)
PETROL DIESEL DIESEL PETROL
09-09-2002

09-09-2002
RECOMMENDATIONS FOR
APPROVED LUBRICANTS
The oils which appear in the table
opposite are suitable for most pur
poses.
The diagram opposite states the
optimum range of viscosity depend
ing on the temperatures at which the
oils are to be used.
It is also possible to use "superior
quality" synthetic oils.
In the absence of semisynthetic or
synthetic oils, oils of API SH/SJ qual
ity (for petrol engines), or CD/CF
quality (for diesel engines) may be
used by following the "Arduous
Conditions" servicing schedule,
which specifies shorter intervals.
Do not hesitate to ask for advice from
a PEUGEOT dealer to maintain dri
ving pleasure and to minimise the
maintenance cost of your vehicle.
For countries outside Europe, please
contact a local PEUGEOT dealer.
PEUGEOT SERVICING27
Manual
ONLY ONLY
Gearbox ESSO Gear Oil BV TOTAL TRANSMISSION BV 75W80 PR 9736.41 75W80
AutomaticONLY
GearboxATF 4HP20AL4PR 9736.22
Other approved products
Power steering FLUIDE DA PR 9730. A1
Brake fluid PEUGEOT DOT4
Coolant
ONLY PROCOR TM108/GLYSANTIN G33 or REVKOGEL 2000
Protection to minus 35C

09-09-2002
1 Rev counter.
2 Seat belt not fastened warning
light.
3 Engine diagnostics warning
light.
4 Handbrake and low brake fluid
level warning light.
5 Lefthand direction indicator.
6 Coolant temperature indicator. 7
Battery charge warning light.
8 Central (STOP) warning light.
9 Engine oil pressure warning
light.
10 Low fuel level warning light.
11 Righthand direction indicator.
12 Fuel gauge.
13 ABS warning light. 14
Air bag warning light.indicator
light.
16 Speedometer.
17 Service indicator, oil level and
total distance recorder.
18 Trip recorder zero reset.
19 Rear fog lamp indicator light.
20 ESP/ASR warning light
21 Front fog lamps indicator
light.
22 Diesel engine preheating light.
23 Main beam headlamps
indicator light.
24 Low coolant level warning light.
25 Dipped beam headlamps
indicator light.
26 Water in diesel filter warning
light.
27 Lighting rheostat.
INSTRUMENTS AND CONTROLS
28
PETROL / DIESEL INSTRUMENT PANEL DIALS: MANUAL GEARBOX