2001 TOYOTA AVALON fluid

Z14380
ON OFF
BE1217
Warning Light
Ignition
Switch
Battery
N20217
OFF
ONOhmmeter
Z10258
Wire harness side:
12 BE-62
- BODY ELECTRICALCOMBINATION METER
1666 Author
: Date
:
2001 AVALON (RM808U)
26. INSPECT BUCKLE SWITCH CONTINUITY
(a) Check that continuity exists between the terminals on the
switch side connector with the switch ON (belt unfas-
tened).
(b) Check that no continuity exists between the terminals on
the switch side connector with the switch OFF (belt fas-
tened).
27. INSPECT WASHER LEVEL WARNING LIGHT
(a) Disconnect the connectors from the level warning switch.
(b) Connect terminals on the wire harness side connector of
the level warning switch connector.
(c) Turn the ignition switch ON, check that the warning light
come on.
If the warning light does not light up, test the bulb.
28. INSPECT WASHER LEVEL WARING SWITCH
(a) Check that no continuity exists between terminals with the
switch OFF (float up).
(b) Check that continuity exists between terminals with the
switch ON (float down).
If operation is not as specified, replace the switch.
29. INSPECT WASHER FLUID LEVEL WARNING SWITCH
CIRCUIT
Disconnect the switch connector and inspect the connector on
wire harness side.
Tester connectionConditionSpecified condition
2 - GroundConstantContinuity
If the warning light does not light up, test the bulb or inspect wire
harness.

BE0IE-03
I12531
Brake Master Cylinder

Brake Fluid Level
Warning Switch
Engine Room
Junction Block

SRS WRN Fuse
Washer Tank

Washer Fluid Level
Warning Switch
Combination Meter

Meter Circuit
Light Control
Rheostat
Driver Side Junction Block

GAUGE No.1 Fuse

PANEL Fuse

ECU-B No.1, 2 Fuss

ECU-IG No.2 Fuse

RAD No.1 Fuse

DOME Fuse

ECU ACC Fuse Parking Brake
Switch
Ignition Switch
Multi Information Display
- BODY ELECTRICALCOMBINATION METER
BE-41
1645 Author
: Date
:
2001 AVALON (RM808U)
COMBINATION METER
LOCATION

- BODY ELECTRICALTROUBLESHOOTING
BE-3
1607 Author
: Date
:
2001 AVALON (RM808U)
INTERIOR LIGHT SYSTEM:
This system uses the multiplex communication system, so check diagnosis system of the multiplex commu-
nication system before checking the body control system.
BACK-UP LIGHT SYSTEM:
SymptomSuspect AreaSee page
Back-Up Light does not light up.
1. GAUGE Fuse
2. Ignition Switch
3. Park/Neutral Position Switch
4. Back-up Light Relay (Column Shift)
5. Bulb
6. Wire Harness-
BE-16
DI-199
BE-34
-
-
Back-Up Light remains always ON.
1. Park/Neutral Position Switch
2. Back-up Light Relay (Column Shift)
3. Wire HarnessDI-199
BE-34
-
Only one light does not light up.1. Bulb
2. Wire Harness-
-
STOP LIGHT SYSTEM:
SymptomSuspect AreaSee page
Stop light does not light up.
1. STOP Fuse
2. GAUGE Fuse
3. Stop Light Switch
4. Light Failure Sensor
5. Wire Harness-
-
BE-36
BE-53
-
Only one light always lights up.1. Wire Harness-
Only one light does not light.1. Bulb
2. Wire Harness-
-
WIPER AND WASHER SYSTEM:
SymptomSuspect AreaSee page
Wiper and washers do not operate.
1. IG 1 Relay
2. WIPER Fuse
3. Wiper Switch
4. Wiper Motor
5. Wire Harness-
-
BE-38
BE-38
-
Wipers do not operate in LO or HI.
1. Wiper Switch
2. Wiper Motor
3. Wire HarnessBE-38
BE-38
-
Wipers do not operate in INT.
1. Wiper Fuse
2. Wiper Switch
3. Wiper Motor
4. Wire Harness-
BE-38
BE-38
-
Washer motor does not operate.
1. Washer Switch
2. Washer Motor
3. Wire HarnessBE-38
BE-38
-
Wipers do not operate when washer switch in ON.1. Washer Motor
2. Wire HarnessBE-38
-
Washer fluid does not operate.1. Washer Hose and Nozzle-

In wiper switch HI position, the wiper blade is in contact with
the body.

When the wiper switch is OFF, the wiper blade does not
retract or the retract position is wrong.1. *1Wiper Switch
2. Wire HarnessBE-38
-
*1: Inspect wiper arm and blade set position

- BODY ELECTRICALTROUBLESHOOTING
BE-5
1609 Author
: Date
:
2001 AVALON (RM808U) Seat Belt warning light does not light up.
1. Bulb
2. Body Control System
3. Meter Circuit Plate
4. Wire Harness-
DI-615
BE-53
-
Discharge warning light does not light up.
1. AM2 - Fuse
2. Bulb
3. Meter Circuit Plate
4. Wire Harness
5. Generator-
-
BE-53
-
CH-9
Light Failure warning light does not light up.
1. Bulb
2. Light Failure Sensor
3. Bulb Check Relay
4. Wire Harness
5. Taillight System-
BE-53
BE-53
-
BE-2
Brake warning light does not light up.
1. Bulb
2. Parking Brake Switch
3. Brake Fluid Level Warning Switch
4. Bulb Check Relay
5. Meter Circuit Plate
6. Wire Harness-
BE-53
BE-53
BE-53
BE-43
-
SRS Warning light does not light up.
1. AM2 - Fuse
2. Bulb
3. Airbag Sensor Assembly
4. Meter Circuit Plate
5. Wire Harness-
-
RS-62
RS-67
BE-43
Open Door warning light does not light up.
1. DOME Fuse
2. Bulb
3. Door Courtesy Switch
4. Body Control System
5. Meter Circuit Plate
6. Wire Harness-
-
BE-31
DI-615
BE-43
-
Washer Level warning light does not light up.
1. Bulb
2. Washer Fluid Level Warning Switch
3. Meter Circuit Plate
4. Wire Harness-
BE-53
BE-43
-
COMBINATION METER (Indicator Lights):
SymptomSuspect AreaSee page
O/D OFF indicator light does not light up.
1. Bulb
2. O/D OFF Switch
3. ECM
4. Meter Circuit Plate
5. Wire Harness-
DI-203
DI-1
BE-43
-
Cruise Control indicator light does not light up.
1. Bulb
2. Cruise Control ECU
3. Meter Circuit Plate
4. Wire Harness-
DI-549
BE-43
-
High beam indicator light does not light up.
1. Bulb and Taillight
2. Headlight System
3. Meter Circuit Plate
4. Wire Harness-
BE-2
BE-43
-
Turn indicator light does not light up.
1. Bulb
2. Turn Signal and Hazard Warning System
3. Meter Circuit Plate
4. Wire Harness-
BE-2
BE-43
-

BO2P5-01
BE3367
2 - 2.5 mm
(0.028 - 0.030 in.)0.7 - 0.75 mm(0.079 - 0.098 in.)
- BODYFRONT WIPER AND WASHER
BO-41
1826 Author
: Date
:
2001 AVALON (RM808U)
ADJUSTMENT
ADJUST WASHER NOZZLE
Using a tool like the one shown in the illustration, change the
direction of the nozzle hole to adjust the point where washer
fluid hits the windshield.

BO2P4-01
H12132H12133H12807
2 Jet nozzle:
3 Jet nozzle:
ABB
BB
B
B F
GC
E
IJ
H
LK
O
N
M
P
UST RQ D
V
W
BO-40
- BODYFRONT WIPER AND WASHER
1825 Author
: Date
:
2001 AVALON (RM808U)
INSPECTION
INSPECT FRONT WASHER NOZZLE
While operating the washer, check that both the point where the
washer fluid from the upper nozzles hits the windshield, and the
upsurge area are within the range indicated by the hatched line.
A: 360 mm (14.17 in.)
B: 150 mm (5.91 in.)
C: 370 mm (14.57 in.)
D: 190 mm (7.48 in.)
E: 200 mm (7.87 in.)
F: 220 mm (8.66 in.)
G: 430 mm (16.93 in.)
H: 265 mm (10.43 in.)
I: 165 mm (6.50 in.)
J: 35 mm (1.38 in.)
K: 215 mm (8.46 in.)
L: 180 mm (7.09 in.)
M: 175 mm (6.89 in.)
N: 265 mm (10.43 in.)
O: 195 mm (7.68 in.)
P: 40 mm (1.57 in.)
Q: 230 mm (9.06 in.)
R: 90 mm (3.54 in.)
S: 270 mm (10.63 in.)
T: 545 mm (21.46 in.)
U: 505 mm (19.88 in.)
V: 130 mm (5.12 in.)
W: 350 mm (13.78 in.)

BR0LP-04
- BRAKEABS ACTUATOR
BR-51
1450 Author
: Date
:
2001 AVALON (RM808U)
INSTALLATION
Installation is in the reverse order of removal (See page BR-48).
HINT:

After installation, fill the brake reservoir with brake fluid, bleed brake system (See page BR-4).

Check for fluid leaks.

BR158-01
- BRAKEABS & VSC ACTUATOR
BR-55
1454 Author
: Date
:
2001 AVALON (RM808U)
INSTALLATION
Installation is in the reverse order of removal (See page BR-54).
HINT:

After installation, fill the brake reservoir with brake fluid, bleed brake system (See page BR-4).

Check for fluid leaks.