2000 TOYOTA CAMRY Warning

DI±634
± DIAGNOSTICSSUPPLEMENTAL RESTRAINT SYSTEM
869 Author: Date:
DTC No.
(See Page)Detection ItemTrouble AreaSRS
Warning Light
TMMK made:
B0112/41
(DI±689)
Short in side squib (RH) circuit
(to Ground)
Side airbag assembly RH (squib)

Airbag sensor assembly

Wire harness

Sub wire harness
Blink
TMC made:
B0113/42
(DI±693)
Short in side squib (RH) circuit
(to B+)
Side airbag assembly RH (squib)

Airbag sensor assembly

Wire harness
Blink
TMMK made:
B0113/42
(DI±696)
Short in side squib (RH) circuit
(to B+)
Side airbag assembly RH (squib)

Airbag sensor assembly

Wire harness

Sub wire harness
Blink
TMC made:
B0115/47
(DI±700)
Short in side squib (LH) circuit
Side airbag assembly LH (squib)

Airbag sensor assembly

Wire harness
Blink
TMMK made:
B0115/47
(DI±704)
Short in side squib (LH) circuit
Side airbag assembly LH (squib)

Airbag sensor assembly

Wire harness

Sub wire harness
Blink
TMC made:
B0116/48
(DI±709)
Open in side squib (LH) circuit
Side airbag assembly LH (squib)

Airbag sensor assembly

Wire harness
Blink
TMMK made:
B0116/48
(DI±712)
Open in side squib (LH) circuit
Side airbag assembly LH (squib)

Airbag sensor assembly

Wire harness

Sub wire harness
Blink
TMC made:
B0117/45
(DI±716)
Short in side squib (LH) circuit
(to Ground)
Side airbag assembly LH (squib)

Airbag sensor assembly

Wire harness
Blink
TMMK made:
B0117/45
(DI±719)
Short in side squib (LH) circuit
(to Ground)
Side airbag assembly LH (squib)

Airbag sensor assembly

Wire harness

Sub wire harness
Blink
TMC made:
B0118/46
(DI±723)
Short in side squib (LH) circuit
(to B+)
Side airbag assembly LH (squib)

Airbag sensor assembly

Wire harness
Blink
TMMK made:
B0118/46
(DI±726)
Short in side squib (LH) circuit
(to B+)
Side airbag assembly LH (squib)

Airbag sensor assembly

Wire harness

Sub wire harness
Blink
B0130/63
(DI±730)
Short in P/T squib (RH) circuit
Seat belt pretensioner RH (squib)

Airbag sensor assembly

Wire harness
Blink
B0131/64
(DI±734)
Open in P/T squib (RH) circuit
Seat belt pretensioner RH (squib)

Airbag sensor assembly

Wire harness
Blink
B0132/61
(DI±737)
Short in P/T squib (RH) circuit
(to Ground)
Seat belt pretensioner RH (squib)

Airbag sensor assembly

Wire harness
Blink
B0133/62
(DI±740)
Short in P/T squib (RH) circuit
(to B+)
Seat belt pretensioner RH (squib)

Airbag sensor assembly

Wire harness
Blink

± DIAGNOSTICSSUPPLEMENTAL RESTRAINT SYSTEM
DI±635
870 Author: Date:
DTC No.
(See Page)Detection ItemTrouble AreaSRS
Warning Light
B0135/73
(DI±743)
Short in P/T squib (LH) circuit
Seat belt pretensioner LH (squib)

Airbag sensor assembly

Wire harness
Blink
B0136/74
(DI±747)
Open in P/T squib (LH) circuit
Seat belt pretensioner LH (squib)

Airbag sensor assembly

Wire harness
Blink
B0137/71
(DI±750)
Short in P/T squib (LH) circuit
(to Ground)
Seat belt pretensioner LH (squib)

Airbag sensor assembly

Wire harness
Blink
B0138/72
(DI±753)
Short in P/T squib (LH) circuit
(to B+)
Seat belt pretensioner LH (squib)

Airbag sensor assembly

Wire harness
Blink
B1100/31
(DI±756)
Airbag sensor assembly malfunction
Airbag sensor assemblyON
B1140/32
(DI±758)
Side airbag sensor assembly (RH)
malfunction
Side airbag sensor assembly (RH)

Wire harnessBlink
B1141/33
(DI±766)
Side airbag sensor assembly (LH)
malfunction
Side airbag sensor assembly (LH)

Wire harnessBlink
B1156/B1157/
15
(DI±774)
Front airbag sensor (RH) malfunction
Front airbag sensor (RH)

Wire harness

Engine room main wire harness
ON
B1158/B1159/
16
(DI±782)
Front airbag sensor (LH) malfunction
Front airbag sensor (LH)

Wire harness
ON
Nl
System normal±OFFNormal
(DI±787)
Voltage source drop
Battery

Airbag sensor assemblyON
HINT:

When the SRS warning light remains lit up and the DTC is the normal code, this means a voltage source
drops.
This malfunction is not stored in memory by the airbag sensor assembly and if the power source volt-
age returns to normal, the SRS warning light will automatically go out.

When 2 or more codes are indicated, the codes will be displayed in numeral order starting from the
lowest numbered code.

If a code not listed on the chart is displayed, the airbag sensor assembly is faulty.

DI1B0±04
H08283
Combination Meter
(Warning Light)Steering Wheel Pad
(with Airbag)
Airbag Sensor AssemblyFront Passenger
Airbag Assembly
Side Airbag Assembly
(LH)
Side Airbag Sensor
Assembly (LH)
Seat Belt
Pretensioner (LH)Side Airbag Assembly (RH)
Side Airbag Sensor Assembly (RH)
Seat Belt
Pretensioner (RH) Front Airbag
Sensor (LH)Front Airbag Sensor (RH)
Spiral Cable
DI±636
± DIAGNOSTICSSUPPLEMENTAL RESTRAINT SYSTEM
871 Author: Date:
PARTS LOCATION

DI1B1±08
H01357
C18
C17C19
287 8 9 10 16 17
18A B12 3 4 5 6
11 12 15 14 13
AABB
19 20 21 22 23 24 25 26 27 1 2 3 4 5 6
7 8 9 10 11 121 2 3 4 5 6
7 8 9 10 11 12
± DIAGNOSTICSSUPPLEMENTAL RESTRAINT SYSTEM
DI±637
872 Author: Date:
TERMINALS OF ECU
No.SymbolTerminal Name
A±Electrical Connector Check Mechanism
B±Electrical Connector Check Mechanism
C18 ± 3LASRS Warning Light
C18 ± 5IG2Power Source (IGN Fuse)
C18 ± 6ACCPower Source (CIG Fuse)
C18 ± 9SR+Front Airbag Sensor (RH)
C18 ± 10P+Squib (Passenger)
C18 ± 11P±Squib (Passenger)
C18 ± 12SILDiagnosis
C18 ± 13D±Squib (Driver)
C18 ± 14D+Squib (Driver)
C18 ± 15SL+Front Airbag Sensor (LH)
C18 ± 19TcDiagnosis
C18 ± 20SR±Front Airbag Sensor (RH)
C18 ± 26SL±Front Airbag Sensor (LH)
C18 ± 27E1Ground
C18 ± 28E2Ground
C17 ± 1PL±Squib (Seat Belt Pretensioner, LH)
C17 ± 2PL+Squib (Seat Belt Pretensioner, LH)
C17 ± 5SFL+Squib (Side, LH)
C17 ± 6SFL±Squib (Side, LH)
C17 ± 7VUPLSide Airbag Sensor (LH)
C17 ± 9SSL+Side Airbag Sensor (LH)
C17 ± 10FSLSide Airbag Sensor (LH)
C17 ± 12ESLSide Airbag Sensor (LH)

DI164±18
± DIAGNOSTICSSUPPLEMENTAL RESTRAINT SYSTEM
DI±639
874 Author: Date:
PROBLEM SYMPTOMS TABLE
Proceed with troubleshooting of each circuit in the table below.
SymptomSuspect AreaSee page

With the ignition switch in ACC or ON position, the SRS warning
light sometimes lights up after approx. 6 seconds have elapsed.
SRS warning light circuit
(Al li ht h i iti it h i i LOCK iDI 790
SRS warning light is always lit up even when ignition switch is in
the LOCK position.(Always lights up when ignition switch is in LOCK posi-
tion.)DI±790

With the ignition switch in ACC or ON position, the SRS warning
light does not light up.
SRS warning light circuit
(Does not light up when ignition switch is turned to ACC or
ON.)
DI±792

DTC is not displayed.

SRS warning light is always lit up at the time of DTC check pro-
cedure.
Tc terminal circuitDI±796

DTC is displayed without Tc and E1 terminal connection.

H02288
15A CIG
L±R 2Airbag Sensor
Assembly 2
3 4
6 7
6
3B±R
65A IGN
C18 1K
IG 1K
1N1N
C18 Instrument Panel J/B
30A AM2
W±R W±R1
4 40A AM1
2L
1K2A
1B
1K1B
55 W2
1
2 Instrument Panel J/B
AF9 F4F6 FL MAIN
B±G
100A
ALT
Instrument Panel J/B Junction
Connector
W±B7
1J 1NW±BC18
1 Battery
1 1
2
5
B±O
GR
ACCIG2 Fusible Link Block
27
E1 Ignition Switch1 B±RB
± DIAGNOSTICSSUPPLEMENTAL RESTRAINT SYSTEM
DI±787
1022 Author: Date:
DTC Normal Source Voltage Drop
CIRCUIT DESCRIPTION
The SRS is equipped with a voltage±increase circuit (DC±DC converter) in the airbag sensor assembly in
case the source voltage drops.
When the battery voltage drops, the voltage±increase circuit (DC±DC converter) functions to increase the
voltage of the SRS to normal voltage.
The diagnosis system malfunction display for this circuit is different from other circuits that is when the SRS
warning light remains lit up and the DTC is a normal code, source voltage drop is indicated.
Malfunction in this circuit is not recorded in the airbag sensor assembly, and the source voltage returns to
normal, the SRS warning light automatically goes off.
DTC No.Diagnosis
(Normal)Source voltage drop
WIRING DIAGRAM
DI1BN±08

AB0119H01298H01299
Airbag Sensor Assembly
ON
ACC
IG2
(+) (±)
H01249
ON
± DIAGNOSTICSSUPPLEMENTAL RESTRAINT SYSTEM
DI±789
1024 Author: Date:
2 Check source voltage.
PREPARATION:
Connect negative (±) terminal cable to the battery.
CHECK:
(a) Turn ignition switch ON.
(b) Measure the voltage each of IG2 and ACC on the sensor
and operate electric system. (defogger, wiper, headlight,
heater blower, etc.)
OK:
Voltage: 10 ± 14 V
NG Check harness between battery and airbag sen-
sor assembly, and check battery and charging
system.
OK
3 Does SRS warning light turn off?
PREPARATION:
(a) Turn ignition switch to LOCK.
(b) Connect the steering wheel pad connector.
(c) Connect the front passenger airbag assembly connector.
(d) Connect the airbag sensor assembly connectors.
(e) Connect the side airbag assembly connectors.
(f) Connect the seat belt pretensioner connectors.
(g) Connect the side airbag sensor assembly connectors.
(h) Connect the front airbag sensor connectors.
(i) Turn ignition switch to ON.
CHECK:
Operate electric system (defogger, wiper, headlight, heater
blower, etc.) and check that SRS warning light goes off.
NO Check for DTCs. If a DTC is output, perform trou-
bleshooting for the DTC. If a normal code is out-
put, replace airbag sensor assembly.
YES
From the results of the above inspection, the malfunctioning part can now be considered normal.
To make sure of this, use the simulation method to check.

H02289
2 Airbag Sensor
Assembly
237
B±Y
12 IG2
C18LG
AB10A
ECU±B
Short Pin
W±R
1W Engine Room J/B No.2
11 B
II3 A
A 3
LG
5DLC1 1 Battery
4 J3 Junction
Connector
1G2J 2A B±G
F4 F6 FL MAINFusible Link Block
1
1
TCP±B7Instrument Panel J/B
C18
B A LAW±R
LG
13
TC B±Y (*1)
LG (*2)
LG±R (*3)
P±B (*4)
II3 LG±R11
B B
TC LG±R J3 Junction
Connector
19
DLC2 SRS Warning Light
*1: TMMK Made, 1MZ±FE
*2: Except *1
*3: TMC Made
*4: TMMK Made DI±790
± DIAGNOSTICSSUPPLEMENTAL RESTRAINT SYSTEM
1025 Author: Date:
SRS Warning Light Circuit Malfunction (Always lights up, when
ignition switch is in LOCK position.)
CIRCUIT DESCRIPTION
The SRS warning light is located on the combination meter.
When the SRS is normal, the SRS warning light lights up for approx. 6 seconds after the ignition switch is
turned from the LOCK position to ACC or ON position, and then turns off automatically.
If there is a malfunction in the SRS, the SRS warning light lights up to inform the driver of the abnormality.
When terminals Tc and E1 of the DLC1 are connected, the DTC is displayed by blinking the SRS warning
light.
WIRING DIAGRAM
DI1BO±08