Page 1009 of 1839
AUTOMATIC TRANSMISSION -On-vehicle Service23-108
Symptom Problem location
Abnormal RED pressure onlyMalfunction of oil seal U or V
Malfunction of reaction solenoid valve
Malfunction of reduction pressure control valve
Blocked orifices
Incorrect valve body installation
Abnormal DR pressure onlyBlocked oil cooler
Malfunction of oil seal N
Malfunction of damper clutch control solenoid valve
Malfunction of damper clutch control solenoid valve
Malfunction of torque converter pressure control valve
Blocked orifices
Incorrect valve body installation
Pressure applied to non-operating elementIncorrect transmission control cable adjustment
Malfunction of manual valve
Incorrect valve body installation
www.WorkshopManuals.co.uk
Purchased from www.WorkshopManuals.co.uk
Page 1032 of 1839
Service Bulletins
Click on the applicable bookmark to select the Service Bulletin.
www.WorkshopManuals.co.uk
Purchased from www.WorkshopManuals.co.uk
Page 1039 of 1839
25-1
PROPELLER
SHAFT
CONTENTS
GENERAL INFORMATION 2..................
SERVICE SPECIFICATIONS 2.................
LUBRICANT 2...............................SPECIAL TOOL 2............................
PROPELLER SHAFT 2.......................
www.WorkshopManuals.co.uk
Purchased from www.WorkshopManuals.co.uk
Page 1050 of 1839
26-1
FRONT AXLE
CONTENTS
GENERAL INFORMATION 2..................
SERVICE SPECIFICATIONS 4.................
LUBRICANTS 4..............................
SEALANTS 5................................
SPECIAL TOOLS 5..........................
ON-VEHICLE SERVICE 10...................
Wheel Bearing Backlash Check 10..............
Front Axle Total Backlash Check 10.............
Front Axle Gear Oil Level Check 11.............
Differential Carrier Oil Seal Replacement 11......
Solenoid Valve Operation Check 12..............
FRONT HUB AND KNUCKLE ASSEMBLY 13.
DRIVE SHAFT 16...........................
INNER SHAFT, HOUSING TUBE 24..........
FREEWHEEL CLUTCH ASSEMBLY,
DIFFERENTIAL CARRIER 28.................
FREEWHEEL CLUTCH ASSEMBLY 31.......
DIFFERENTIAL CARRIER 34.................
SOLENOID VALVE, VACUUMPIPE, VACUUM
TANK 49....................................
FRONT DIFFERENTIAL MOUNT 51..........
www.WorkshopManuals.co.uk
Purchased from www.WorkshopManuals.co.uk
Page 1053 of 1839
FRONT AXLE -Service Specifications/Lubricants26-4
SERVICE SPECIFICATIONS
ItemStandard valueLimit
Wheel bearing axis backlash mm-0
Front axle total backlash mm-11
Solenoid valve resistanceW36 - 46-
Hub rotation starting torque N×m-1.75
Setting of D.O.J. boot length mm80±5-
Opening dimension of the spe-
cial tool (MB991561) mmWhen the B.J. boot band
(small) is crimped.2.9-
When the B.J. boot band
(big) is crimped.3.2-
Crimped width of the B.J. boot band mm2.4 - 2.8-
Crimped height of B. J. boot band (big) mm-9.5
Final drive gear backlash mm0.11 - 0.16-
Drive gear runout mm-0.05
Differential gear backlash mm0 - 0.0760.2
Drive pinion turning torque N×mWithout oil seal0.83 - 1.19-
With oil sealCompanion flange (oil seal contact
surface) with anti-rust oil
0.93 - 1.128-
Companion flange (oil seal contact
surface) with gear oil
0.97 - 1.32-
LUBRICANTS
ItemsSpecified lubricantsQuantity
Front differential gear oilHypoid gear oil API classification GL-5 or higher, SAE
viscosity No. 90, 80W1.2 L
D.O.J. boot greaseRepair kit grease4M41-M/T:135±10 g
4M41-A/T, 6G7:
100±10 g
U.J.boot greaseRepair kit grease4M41-M/T:180±10 g
4M41-A/T, 6G7:
135±10 g
www.WorkshopManuals.co.uk
Purchased from www.WorkshopManuals.co.uk
Page 1103 of 1839
27-1
REAR AXLE
CONTENTS
GENERAL INFORMATION 2...................
SERVICE SPECIFICATIONS 3.................
LUBRICANTS 3..............................
SEALANTS 4................................
SPECIAL TOOLS 5...........................
ON-VEHICLE SERVICE 8.....................
Rear Axle Total Backlash Check 8................
Gear Oil Level Check 8.........................
Wheel Bearing Axial Play Check 8................Rear Differential Lock Detection Switch Check 9....
Rear Differential Lock System Air Leakage
Check 9.......................................
REAR HUB ASSEMBLY 10...................
KNUCKLE 13...............................
DRIVE SHAFT 14............................
REAR DIFFERENTIAL LOCK 20..............
DIFFERENTIAL CARRIER 23.................
www.WorkshopManuals.co.uk
Purchased from www.WorkshopManuals.co.uk
Page 1144 of 1839
31-1
WHEEL AND TYRE
CONTENTS
GENERAL INFORMATION 2..................
SERVICE SPECIFICATIONS 2.................
TROUBLESHOOTING 3.......................ON-VEHICLE SERVICE 7.....................
Tyre Inflation Pressure Check 7.................
Tyre Wear Check 7............................
Wheel Runout Check 7.........................
WHEEL AND TYRE 7........................
www.WorkshopManuals.co.uk
Purchased from www.WorkshopManuals.co.uk
Page 1145 of 1839
WHEEL AND TYRE -General Information/Service Specifications31-2
GENERAL INFORMATION
The wheels and tyres of the following specifications
have been established.
SPECIFICATIONS
Items4D5, 4M46G7
GL, GLXGLS
WheelTypeSteel type
Aluminium type*Aluminium typeAluminium type
Size16¢6JJ
16¢7JJ*16¢7JJ16¢7JJ
Amount of wheel offset mm464646
Pitch circle diameter (P.C.D.) mm139.7139.7139.7
TyreSize235/80R16 109S
265/70R16 112S*265/70R16 112S265/70R16 112H
NOTE
*: Optional items
SERVICE SPECIFICATIONS
ItemsLimit
Tread depth of tyre mm1.6
Wheel runout (Radial runout) mmSteel wheel1.2 or less
Aluminium wheel1.0 or less
Wheel runout (Lateral runout) mmSteel wheel1.2 or less
Aluminium wheel1.0 or less
www.WorkshopManuals.co.uk
Purchased from www.WorkshopManuals.co.uk
