SS07G±02
± SERVICE SPECIFICATIONSIGNITION (1MZ±FE)
SS±33
196 Author: Date:
IGNITION (1MZ±FE)
SERVICE DATA
Firing order±1 ± 2 ± 3 ± 4 ± 5 ± 6
High±tension
cordResistance Maximum25 kW per cord
Spark plugRecommended spark plug DENSO made
NGK made
Correct electrode gap for new plug
Maximum electrode gap for used plugPK20TR11
BKR6EKPB11
1.1 mm (0.043 in.)
1.3 mm (0.051 in.)
Ignition coilPrimary coil resistance at cold
at hot
Secondary coil resistance
AISAN made at cold
at hot
Diamond made at cold
at hot0.70 ± 0.94 W
0.85 ± 1.10 W
10.8 ± 14.9 kW
13.1 ± 17.5 kW
6.8 ± 11.7 kW
8.6 ± 13.7 kW
Camshaft
position
sensorResistance
DENSO made at cold
at hot
Wabash made at cold
at hot
835 ± 1,400 W
1,060 ± 1,645 W
1,690 ± 2,560 W
2,145 ± 3,010 W
Crankshaft
position
sensorResistance at cold
at hot1,630 ± 2,740 W
2,065 ± 3,225 W
Toyota Supports ASE CertificationPage 1 of 1
AC002±00
Title:
A/C COMPRESSOR MAINTENANCE FOR
STORED VEHICLES
Models:
All Models
Technical Service
BULLETIN
July 21, 2000
When a vehicle is stored for a long period (more than one month), the volume of oil
in the A/C compressor may decrease due to oil flow into the condenser, pipes, etc.
If the A/C system is turned on at high engine RPM after a long storage period, A/C
compressor damage may result.
To minimize the possibility of damage to the A/C compressor while storing a vehicle,
perform the following recommended maintenance procedure at
least once a month to
lubricate the compressor.
Recommended
Maintenance Procedure For A/C Compressor Lubrication:
1. Turn
off A/C and blower switches prior to starting engine.
2. Start and warm±up engine until engine speed drops below 1,000 RPM.
3. Turn on the A/C system (including the rear A/C) using the following settings:
A/C switch: On
Blower Speed: High
Engine Speed: Below 1,000 RPM
4. Keep A/C on with engine idling for at least 30 seconds.
5. Turn off A/C system and stop engine.
OP CODEDESCRIPTIONTIMEOPNT1T2
N/ANot Applicable to Warranty ±±±±
HEATING & AIR CONDITIONING
Introduction
Maintenance
Procedure
Warranty
Information