1999 NISSAN PRIMERA remove seats

Side and Floor Trim
CAUTION:
Wrap the tip of flat-bladed screwdriver with a cloth when removing metal clips from garnishes.
REMOVAL Ð Body side trim
4-door sedan
p1Remove front and rear seats. Refer to ªSEATº for details, BT-40.
p2Remove front and rear kicking plates.
p3Remove dash side lower finishers.
p4Remove front and rear body side welts.
p5Remove front pillar garnishes.
p6Remove center pillar lower garnishes.
p7Remove front seat belt shoulder adjustment anchor bolt covers and anchor bolts (Refer to ªSEAT BELTSº
in RS section for anchor bolt details).
p8Remove center pillar upper garnishes.
p9Remove rear pillar garnishes.
p10High-mount stop lamp.
p11Remove rear parcel shelf finisher.
p12Remove welt.
p13Remove seatback finisher.
YBT011 X: Metal clipsMetal clip
Metal clip
Metal clip
Metal
clip
Metal clip
Metal clip
SEC. 678×749×769×799
INTERIOR TRIM
BT-18

REMOVAL Ð Body side trim
5-door hatchback
lRemove parcel shelf before removing body side trim.
p1Remove front and rear seats. Refer to ªSEATº for details, BT-40.
p2Remove front and rear kicking plates.
p3Remove dash side lower finishers.
p4Remove front and rear body side welts.
p5Remove front pillar garnishes.
p6Remove center pillar lower garnishes.
p7Remove front seat belt shoulder adjustment anchor bolt covers and anchor bolts (Refer to ªSEAT BELTSº
in RS section for anchor bolt details).
p8Remove center pillar upper garnishes.
p9Remove rear parcel shelf side finishers.
p10Remove rear pillar finishers.
p11Remove luggage room rear plate.
p12Remove luggage room rear finisher.
p13Remove luggage room side lower finishers.
NBT042 Metal clip
Metal clips
Metal clip
Metal clip
Metal clip
Metal clip
Metal clip
Metal clip
Metal clip
SEC. 678×749×769×799
Metal clip
X : Metal clips
INTERIOR TRIM
Side and Floor Trim (Cont'd)
BT-20

REMOVAL Ð Body side trim
Wagon
lRemove parcel shelf before removing body side trim.
p1Remove front and rear seats. Refer to ªSEATº for details, BT-40.
p2Remove front and rear kicking plates.
p3Remove dash side lower finishers.
p4Remove front and rear body side welts.
p5Remove front pillar garnishes.
p6Remove center pillar lower garnishes.
p7Remove front seat belt shoulder adjustment anchor bolt covers and anchor bolts (Refer to ªSEAT BELTSº
in RS section for anchor bolt details).
p8Remove center pillar upper garnishes.
p9Remove luggage room side center finisher.
p10Remove luggage room side upper finisher.
p11Remove luggage room rear plate.
p12Remove luggage room rear finisher.
p13Remove luggage room side lower finisher.
NBF273 Metal clip
Metal clipsMetal clip
Guard net hook
Metal clip
Metal clip
Metal clip
Metal clip
Clip
.
Clip
: Metal clips
INTERIOR TRIM
Side and Floor Trim (Cont'd)
BT-22

Roof Trim
REMOVAL Ð Headlining
4-door sedan
p1Remove front and rear seats. Refer to ªSEATº for details, BT-40.
p2Remove front and rear seat belts. Refer to ªSEAT BELTSº in RS section for details.
p3Remove body side trim. Refer to ªSide and Floor Trimº for details, BT-18.
p4Remove sunroof switch. (Models equipped with electric sunroof)
p5Remove handle and lamp cover. (Models equipped with manual sunroof)
p6Remove sunroof welt. (Models equipped with sunroof)
p7Remove sun visors.
p8Remove interior lamp assembly.
p9Remove assist grips.
p10Remove clipsC103securing headlining.
p11Remove headlining.
NBT043
SEC. 264×738×963×964
Manual type
C103
INTERIOR TRIM
BT-25

REMOVAL Ð Headlining
5-door hatchback
p1Remove front and rear seats. Refer to ªSEATº for details, BT-40.
p2Remove front and rear seat belts. Refer to ªSEAT BELTSº in RS section for details.
p3Remove body side trim. Refer to ªSide and Floor Trimº for details, BT-20.
p4Remove sunroof switch. (Models equipped with electric sunroof)
p5Remove handle and lamp cover. (Models equipped with manual sunroof)
p6Remove sunroof welt. (Models equipped with sunroof)
p7Remove sun visors.
p8Remove interior lamp assembly.
p9Remove assist grips.
p10Remove roof rear garnish.
p11Remove headlining.
NBT044 Metal clip
Metal clip
SEC. 264×738×963×964
Manual type
INTERIOR TRIM
Roof Trim (Cont'd)
BT-26

REMOVAL Ð Headlining
Wagon
p1Remove front and rear seats. Refer to ªSEATº for details, BT-40.
p2Remove front and rear seat belts. Refer to ªSEAT BELTSº in RS section for details.
p3Remove body side trim. Refer to ªSide and Floor Trimº for details, BT-22.
p4Remove sunroof switch. (Models equipped with electric sunroof)
p5Remove handle and lamp cover. (Models equipped with manual sunroof)
p6Remove sunroof welt. (Models equipped with sunroof)
p7Remove sun visors.
p8Remove interior lamp (center) and interior lamp (rear).
p9Remove assist grips.
p10Remove clipsC103.
p11Remove luggage net escutcheons.
p12Remove roof rear garnish.
p13Remove speakers.
p14Remove headlining.
NBT045 Metal clip
Manual type
Metal clip
C103
p9
INTERIOR TRIM
Roof Trim (Cont'd)
BT-27

6 CHECK IGNITION SPARK
1. Turn Ignition switch ªOFFº.
2. Disconnect ignition coil assembly from rocker cover.
3. Connect a known good spark plug to the ignition coil assembly.
4. Place end of spark plug against a suitable ground and crank engine.
5. Check for spark.
SEF575Q
OK or NG
OK©GO TO 7.
NG©Check ignition coil, power transistor and their circuits. Refer to EC-QG-323.
7 CHECK SPARK PLUGS
Remove the spark plugs and check for fouling, etc.
SEF156I
OK or NG
OK©GO TO 8.
NG©Repair or replace spark plug(s) with standard type one(s). For spark plug type, refer to
ªENGINE MAINTENANCEº in MA section.
8 CHECK COMPRESSION PRESSURE
Refer to EM section.
ICheck compression pressure.
Standard:
1,324 kPa (13.24 bar, 13.5 kg/cm
2, 192 psi)/350 rpm
Minimum:
1,128 kPa (11.28 bar, 11.5 kg/cm
2, 164 psi)/350 rpm
Difference between each cylinder:
98 kPa (0.98 bar, 1.0 kg/cm
2, 14 psi)/350 rpm
OK or NG
OK©GO TO 9.
NG©Check pistons, piston rings, valves, valve seats and cylinder head gaskets.
DTC P0300 - P0304 NO.4-1CYLINDER MISFIRE,
MULTIPLE CYLINDER MISFIREQG16I18DE
Diagnostic Procedure (Cont'd)
EC-225

7 CHECK SPARK PLUGS
Remove the spark plugs and check for fouling, etc.
SEF156I
OK or NG
OK©GO TO 9.
NG©Repair or replace spark plug(s) with standard type one(s). For spark plug type, refer to
ªENGINE MAINTENANCEº in MA section.
8 CHECK COMPRESSION PRESSURE
Refer to EM section.
ICheck compression pressure.
Standard:
1,226 kPa (12.26 bar, 12.5 kg/cm
2, 178 psi)/300 rpm
Minimum:
1,030 kPa (10.30 bar, 10.5 kg/cm
2, 149 psi)/300 rpm
Difference between each cylinder:
98 kPa (0.98 bar, 1.0 kg/cm
2, 14 psi)/300 rpm
OK or NG
OK©GO TO 10.
NG©Check pistons, piston rings, valves, valve seats and cylinder head gaskets.
9 CHECK FUEL PRESSURE
1. Install any parts removed.
2. Release fuel pressure to zero. Refer to EC-SR-31.
3. Install fuel pressure gauge and check fuel pressure.
SEF194XAt idle:
Approx. 235 kPa (2.35 bar, 2.4 kg/cm2, 34 psi)
OK or NG
OK©GO TO 12.
NG©GO TO 11.
Fuel filter
DTC P0300 - P0304 NO.4-1CYLINDER MISFIRE,
MULTIPLE CYLINDER MISFIRESR20DE
Diagnostic Procedure (Cont'd)
EC-227