1997 TOYOTA SUPRA torque

N08452
BO-36
- BODYWINDSHIELD
2116 Author
: Date
:
1997 SUPRA (RM502U)
12. INSTALL WINDSHIELD MOULDING
Place the moulding onto the body and tap it by hand.
13. INSPECT FOR LEAKS AND REPAIR
(a) Do a leak test after the hardening time has elapsed.
(b) Seal any leak with auto glass sealer.
Part No. 08833-00030 or equivalent
14. INSTALL THESE PARTS:
(a) Cowl top ventilator louver
(b) Wiper arms and blades
Torque: 22 N´m (225 kgf´cm, 16 ft´lbf)
(c) Front pillar garnishes
(d) Assist grip
(e) Sun visors and holders
(f) Inner rear view mirror

BO0R2-01
N19533
Tonneau Cover
Deck Trim Rear Cover
Coat Hook
Roof Side Inner Garnish
Tonneau Cover Clamp
Quarter Wheel House
Inner Cover
Deck Trim Side Board
Rear Seat
Outer Belt
Quarter Window
Glass
Roof Side Rail Weatherstrip
Retainer
Roof Side Rail Weatherstrip Speaker Grille Front Seat
Outer Belt
Deck Trim Side Service Hole Cover
Front Door Scuff
Inside Plate

Outside Garnish Seal Rear Seatback
5X
Sport Roof:Lower Back Service
Hole Cover
Removable Roof Stay
Stay Support Cover
Holder Garnish
Removable Roof Holder Luggage Compartment Mat
Spare Wheel Cover Rear Seat Cushion

Non-reusable partRear Quarter Trim Board
43 (440, 32)
25 (260, 19)
N´m (kgf´cm, ft´lbf) : Specified torque
- BODYQUARTER WINDOW GLASS
BO-37
2117 Author
: Date
:
1997 SUPRA (RM502U)
QUARTER WINDOW GLASS
COMPONENTS

BO0R3-01
N09045
Butyl Tape
: 3 Clips
N09040
Outside Garnish Seal BO-38
- BODYQUARTER WINDOW GLASS
2118 Author
: Date
:
1997 SUPRA (RM502U)
REMOVAL
1. REMOVE THESE PARTS:
(See pages BO-61)
(a) Tonneau cover
(b) Luggage compartment mat
(c) Spare wheel cover
(d) Rear seatback
Torque: 25 N´m (260 kgf´cm, 19 ft´lbf)
(e) Removable roof stay RH and LH (Sport roof)
(f) Deck trim rear cover
(g) Removable roof holder (Sport roof)
(h) Quarter wheel house inner cover
(i) Speaker grille
(j) Deck trim side board
(k) Front door scuff inside plate
(l) Rear quarter trim board
(m) Front seat outer belt shoulder anchor
Torque: 43 N´m (440 kgf´cm, 32 ft´lbf)
(n) Rear seat outer belt floor anchor
Torque: 43 N´m (440 kgf´cm, 32 ft´lbf)
(o) Roof side inner garnish
(p) Rear roof headlining (Sport roof)
2. REMOVE ROOF SIDE RAIL WEATHERSTRIP
(a) Using a clip remover, remove the 3 clips from the rear side
of the weatherstrip.
(b) Remove the rear side of the weatherstrip from the retain-
er.
3. REMOVE ROOF SIDE RAIL WEATHERSTRIP RETAIN-
ER
Remove the outside garnish seal and retainer.

BO0QW-01
Z13437

Outside MouldingRear Wiper Arm and Blade
Back Door Glass
Back Door Opening Trim
Back Door Trim Board

Non-reusable part
11 (110, 8.0)
N´m (kgf´cm, ft´lbf)
: Specified torque BO-42
- BODYBACK DOOR GLASS
2122 Author
: Date
:
1997 SUPRA (RM502U)
BACK DOOR GLASS
COMPONENTS

BO0QY-01
N08529
N08533
Primer G
N08534
AdhesiveH BO-44
- BODYBACK DOOR GLASS
2124 Author
: Date
:
1997 SUPRA (RM502U)
INSTALLATION
HINT:
Refer to the installation of the windshield, install the back win-
dow glass by the following operations.
1. INSTALL BACK DOOR MOULDING
Place the moulding around the glass and install it by hand.
HINT:
Always remove the back door glass to install the moulding.
2. INSTALL BACK DOOR GLASS
(a) Coat contact surface of the glass with primer ºGº.
(b) Apply adhesive.
H: 12 mm (0.47 in.)
3. INSTALL THESE PARTS:
(a) Back door opening trim
(b) Back door trim board
(c) Rear wiper arm and blade
Torque: 11 N´m (110 kgf´cm, 8.0 ft´lbf)
4. CONNECT DEFOGGER CONNECTOR

N19395
Instrument Panel Side No.3 Bracket
Instrument Panel
Reinforcement
AAAA
A N
LL
LLL A
Instrument Panel No.1 Brace
Steering
ColumnFinish Panel Mounting
No.5 Bracket
Instrument Panel Lower Mounting
No.1 Bracket
Instrument Panel
Side Defroster
No.2 Nozzle
Front Passenger
Assembly M
D
FF
FF
F
F
Instrument Panel Mounting
No.1 Bracket Instrument Panel
Lower Mounting
No.1 Bracket
Glove Box LampB
E B
E
Glove Compartment
Door Finish Plate
Instrument Panel
Box Finish Panel Mounting
No.4 Bracket Finish Panel
Mounting
No.3 BracketD
J
CJ
CD
Cluster Finish Panel
JJJJJ
Combination
Meter
Audio Receiver
Assembly
Cluster Finish
Center Panel
Cluster Finish Panel LHComputer Cover
Cluster Finish Panel RH
Key Cylinder Lamp H
J HH
H JF
25 (260, 19)
N´m (kgf´cm, ft´lbf): Specified torque
- BODYINSTRUMENT PANEL
BO-51
2131 Author
: Date
:
1997 SUPRA (RM502U)

H01987
N08465
N09351
N11635
BO-56
- BODYINSTRUMENT PANEL
2136 Author
: Date
:
1997 SUPRA (RM502U)
5. REMOVE FRONT PASSENGER AIRBAG ASSEMBLY
(a) Remove the 2 bolts from instrument panel.
Torque: 8.5 N´m (87 kgf´cm, 75 in.´lbf)
(b) Remove the 2 bolts from instrument panel reinforcement.
Torque: 20 N´m (204 kgf´cm, 15 ft´lbf)
(c) Remove the front passenger airbag assembly.
CAUTION:

Do not store the front passenger airbag assembly
with the airbag door facing down.

Never disassemble the front passenger airbag as-
sembly.
NOTICE:
At the time of installation, please refer to the following
items.

Make sure the front passenger airbag assembly is
installed to the specified torque.

Take care that the wirings do not interfere with other
parts and not pinched between other parts.
6. REMOVE THESE PARTS:
(a) Parking brake lever (2 bolts)
Torque: 59 N´m (600 kgf´cm, 43 ft´lbf)
(b) Side defroster No.2 nozzle
(c) Steering column (4 nuts)
Torque: 25 N´m (260 kgf´cm, 19 ft´lbf)
7. REMOVE INSTRUMENT PANEL
(a) Disconnect the connectors.
(b) Remove the nut, screw, 8 bolts and instrument panel.
Torque: 8.8 N´m (90 kgf´cm, 78 ft´lbf)
8. REMOVE INSTRUMENT PANEL REINFORCEMENT
(a) Remove the bolt, 2 nuts and instrument panel No.1 brace.
Torque: 21 N´m (210 kgf´cm, 15 ft´lbf)
(b) Remove the 6 bolts, 4 nuts and instrument panel rein-
forcement.
(c) Remove the bolt, 2 nuts and instrument panel side No.3
bracket.

BO0RF-01
N19535
Sport Roof:

Roof Side Rail Weatherstrip RH

Removable Roof Moulding RH
Removable Roof Headlining
Front Pillar GarnishRear Roof Headlining
Front Roof
Headlining
Assist Grip
Removable Roof
Moulding LH
Roof Side Rail
Weatherstrip LH Roof Headlining
Visor Holder
Sun VisorInterior LightClip
Front Pillar GarnishRoof Side Inner GarnishCoat Hook
Deck Trim Side BoardTonneau Cover
Tonneau
Cover
Clamp
Deck Trim Rear Cover
Quarter Wheel House Cover
Rear Seat Outer Belt
Speaker Grille Assist GripFront Seat
Outer Belt
Deck Trim
Side Service
Hole Cover
Front Door Scuff Inside Plate
Rear Quarter Trim Board
Rear Seatback
5XLuggage Compartment Mat
Rear Seat Cushion
Spare Wheel Cover

Non-reusable partSport Roof:
Removable Roof StayLower Back Service
Hole Cover
Stay Support Cover
Holder Garnish
Removable Roof Holder
43 (440, 32)
43 (440, 32)
25 (260, 19)
N´m (kgf´cm, ft´lbf) : Specified torqueClip
BO-60
- BODYROOF HEADLINING
2140 Author
: Date
:
1997 SUPRA (RM502U)
ROOF HEADLINING
COMPONENTS