1996 SUBARU LEGACY torque

B5M0306
4) Remove roof spoiler mounting nuts.
CAUTION:

When removing nuts, be careful not to drop them
inside rear gate.

Be careful since two-sided tape is placed between
roof spoiler and body panel.
5) Installation is in the reverse order of removal.
Tightening torque:
7.4±2.0 N⋅m (0.75±0.2 kg-m, 5.4±1.4 ft-lb)
B5M0416
21. Side Spoiler (2500 cc GT model
only)
A: REMOVAL AND INSTALLATION
1) Remove tapping screws, clip and end cover.
2) Installation is in the reverse order of removal.
B5M0417
22. Front Under Spoiler (All models
except 2500 cc GT)
A: REMOVAL AND INSTALLATION
1) Remove clips.
2) Installation is in the reverse order of removal.
B5M0418
23. Airdam Skirt (2500 cc GT model
only)
A: REMOVAL AND INSTALLATION
1) Remove airdam skirt mounting bolts and clips.
2) Installation is in the reverse order of removal.
B5M0419
24. Rear Under Spoiler (2500 cc GT
model only)
A: REMOVAL AND INSTALLATION
1) Remove tapping screws and clips.
2) Installation is in the reverse order of removal.
NOTE:

12 tapping screws are used for 4 Door Sedan.

14 tapping screws are used for Station Wagon.
63
5-1SERVICE PROCEDURE
20. Roof Spoiler (Station Wagon 2500 cc GT model only) - 24. Rear Under Spoiler (2500 cc GT model only)

B5M0306
4) Remove roof spoiler mounting nuts.
CAUTION:

When removing nuts, be careful not to drop them
inside rear gate.

Be careful since two-sided tape is placed between
roof spoiler and body panel.
5) Installation is in the reverse order of removal.
Tightening torque:
7.4±2.0 N⋅m (0.75±0.2 kg-m, 5.4±1.4 ft-lb)
B5M0416
21. Side Spoiler (2500 cc GT model
only)
A: REMOVAL AND INSTALLATION
1) Remove tapping screws, clip and end cover.
2) Installation is in the reverse order of removal.
B5M0417
22. Front Under Spoiler (All models
except 2500 cc GT)
A: REMOVAL AND INSTALLATION
1) Remove clips.
2) Installation is in the reverse order of removal.
B5M0418
23. Airdam Skirt (2500 cc GT model
only)
A: REMOVAL AND INSTALLATION
1) Remove airdam skirt mounting bolts and clips.
2) Installation is in the reverse order of removal.
B5M0419
24. Rear Under Spoiler (2500 cc GT
model only)
A: REMOVAL AND INSTALLATION
1) Remove tapping screws and clips.
2) Installation is in the reverse order of removal.
NOTE:

12 tapping screws are used for 4 Door Sedan.

14 tapping screws are used for Station Wagon.
63
5-1SERVICE PROCEDURE
20. Roof Spoiler (Station Wagon 2500 cc GT model only) - 24. Rear Under Spoiler (2500 cc GT model only)

B5M0306
4) Remove roof spoiler mounting nuts.
CAUTION:

When removing nuts, be careful not to drop them
inside rear gate.

Be careful since two-sided tape is placed between
roof spoiler and body panel.
5) Installation is in the reverse order of removal.
Tightening torque:
7.4±2.0 N⋅m (0.75±0.2 kg-m, 5.4±1.4 ft-lb)
B5M0416
21. Side Spoiler (2500 cc GT model
only)
A: REMOVAL AND INSTALLATION
1) Remove tapping screws, clip and end cover.
2) Installation is in the reverse order of removal.
B5M0417
22. Front Under Spoiler (All models
except 2500 cc GT)
A: REMOVAL AND INSTALLATION
1) Remove clips.
2) Installation is in the reverse order of removal.
B5M0418
23. Airdam Skirt (2500 cc GT model
only)
A: REMOVAL AND INSTALLATION
1) Remove airdam skirt mounting bolts and clips.
2) Installation is in the reverse order of removal.
B5M0419
24. Rear Under Spoiler (2500 cc GT
model only)
A: REMOVAL AND INSTALLATION
1) Remove tapping screws and clips.
2) Installation is in the reverse order of removal.
NOTE:

12 tapping screws are used for 4 Door Sedan.

14 tapping screws are used for Station Wagon.
63
5-1SERVICE PROCEDURE
20. Roof Spoiler (Station Wagon 2500 cc GT model only) - 24. Rear Under Spoiler (2500 cc GT model only)

B5M0306
4) Remove roof spoiler mounting nuts.
CAUTION:

When removing nuts, be careful not to drop them
inside rear gate.

Be careful since two-sided tape is placed between
roof spoiler and body panel.
5) Installation is in the reverse order of removal.
Tightening torque:
7.4±2.0 N⋅m (0.75±0.2 kg-m, 5.4±1.4 ft-lb)
B5M0416
21. Side Spoiler (2500 cc GT model
only)
A: REMOVAL AND INSTALLATION
1) Remove tapping screws, clip and end cover.
2) Installation is in the reverse order of removal.
B5M0417
22. Front Under Spoiler (All models
except 2500 cc GT)
A: REMOVAL AND INSTALLATION
1) Remove clips.
2) Installation is in the reverse order of removal.
B5M0418
23. Airdam Skirt (2500 cc GT model
only)
A: REMOVAL AND INSTALLATION
1) Remove airdam skirt mounting bolts and clips.
2) Installation is in the reverse order of removal.
B5M0419
24. Rear Under Spoiler (2500 cc GT
model only)
A: REMOVAL AND INSTALLATION
1) Remove tapping screws and clips.
2) Installation is in the reverse order of removal.
NOTE:

12 tapping screws are used for 4 Door Sedan.

14 tapping screws are used for Station Wagon.
63
5-1SERVICE PROCEDURE
20. Roof Spoiler (Station Wagon 2500 cc GT model only) - 24. Rear Under Spoiler (2500 cc GT model only)

B5M0306
4) Remove roof spoiler mounting nuts.
CAUTION:

When removing nuts, be careful not to drop them
inside rear gate.

Be careful since two-sided tape is placed between
roof spoiler and body panel.
5) Installation is in the reverse order of removal.
Tightening torque:
7.4±2.0 N⋅m (0.75±0.2 kg-m, 5.4±1.4 ft-lb)
B5M0416
21. Side Spoiler (2500 cc GT model
only)
A: REMOVAL AND INSTALLATION
1) Remove tapping screws, clip and end cover.
2) Installation is in the reverse order of removal.
B5M0417
22. Front Under Spoiler (All models
except 2500 cc GT)
A: REMOVAL AND INSTALLATION
1) Remove clips.
2) Installation is in the reverse order of removal.
B5M0418
23. Airdam Skirt (2500 cc GT model
only)
A: REMOVAL AND INSTALLATION
1) Remove airdam skirt mounting bolts and clips.
2) Installation is in the reverse order of removal.
B5M0419
24. Rear Under Spoiler (2500 cc GT
model only)
A: REMOVAL AND INSTALLATION
1) Remove tapping screws and clips.
2) Installation is in the reverse order of removal.
NOTE:

12 tapping screws are used for 4 Door Sedan.

14 tapping screws are used for Station Wagon.
63
5-1SERVICE PROCEDURE
20. Roof Spoiler (Station Wagon 2500 cc GT model only) - 24. Rear Under Spoiler (2500 cc GT model only)

1. Front Door
B5M0052A

1Gusset


2Weatherstrip (Outer)


3Stabilizer (Outer)


4Stabilizer (Inner)


5Protector


6Stopper


7Knock pin

8Checker


9Sealing cover


10Door panel


11Lower hinge


12Upper hinge


13Door sash (Rear)


14Door sash (Front)
Tightening torque: N⋅m (kg-m, ft-lb)
T1: 7.4±2.0 (0.75±0.2, 5.4±1.4)
T2: 13±3 (1.3±0.3, 9.4±2.2)
T3: 25±3 (2.5±0.3, 18.1±2.2)
T4: 29±5 (3.0±0.5, 21.7±3.6)
3
5-2COMPONENT PARTS
1. Front Door

2. Rear Door
B5M0053A

1Weatherstrip (Outer)


2Stabilizer (Outer)


3Stabilizer (Inner)


4Stopper


5Knock pin


6Checker

7Seating cover


8Door panel


9Lower hinge


10Upper hinge


11Door sash (Rear)


12Door sash (Front)
Tightening torque: N⋅m (kg-m, ft-lb)
T1: 7.4±2.0 (0.75±0.2, 5.4±1.4)
T2: 14±4 (1.4±0.4, 10.1±2.9)
T3: 25±3 (2.5±0.3, 18.1±2.2)
T4: 29±5 (3.0±0.5, 21.7±3.6)
4
5-2COMPONENT PARTS
2. Rear Door

3. Front Door Glass
B5M0054A

1Glass


2Regulator and motor ASSY


3Regulator handle (Except power window)


4Retainer spring


5Regulator ASSY
Tightening torque: N⋅m (kg-m, ft-lb)
T: 7.4±2.0 (0.75±0.2, 5.4±1.4)
5
5-2COMPONENT PARTS
3. Front Door Glass