1996 CHEVROLET TRACKER Owners Manual

Your vehicle has air outlets that allow you to adjust the
direction and amount of airflow inside
the vehicle. Push
the outlet up
or down to direct airflow to your
preference. Increase
or reduce the amount of airflow by
opening and closing the louvers.
Ventilation Tips
Keep the hood and front air inlet free of ice, snow or
any other obstruction (such
as leaves). The heater
and defroster will work
far better, reducing the
chance
of fogging the inside of your windows.
When you enter a vehicle in cold weather, move the
fan control lever toward the fan symbol for a few
moments before driving off. This helps clear the
intake ducts of
snow and moisture, and reduces the
chance of fogging the inside of your windows.
0 Keep the air path under the front seats clear of
objects. This helps air to circulate throughout
your vehicle.
Defogging and Defrosting
Slide the air intake lever to CIRCULATE and the
airflow lever to DEFROST to direct air to the
windshield vents. Then slide the temperature control
lever toward the right and the fan lever toward the fan
symbol. When the windshield is clear, turn down the
fan
speed.
3-4
ProCarManuals.com

Rear Window Defogger (Option)
The rear window defogger
uses a warming grid to
remove
fog from the
rear window.
Press the switch to
turn on the defogger. An indicator
light will come on below the switch to remind you that
the defogger is on. Press the switch again to turn the
defogger
off. The rear window defogger will also turn
off if you turn the ignition switch to ACC or LOCK, but
will turn back on when the ignition is turned back on.
Do not attach anything like a temporary vehicle license
or a decal across the defogger grid
on the rear window.
1 NOTICE:
Don’t use a razor blade or something else sharp
on the inside
of the rear window. If you do, you
could cut or damage the warming grid, and the
repairs wouldn’t be covered
by your warranty.
3-5
ProCarManuals.com

Audio Systems
Your Delco@ audio system has been designed to operate
easiIy and
give years of listening pleasure. You will get
th,e most enjoyment out of it if
you acquaint yourself
with
it first. Find out what your Delco system can do
and how to operate all its controls, to be sure you're
getting the most out of the advanced engineering that
went into it.
Setting the Clock for AM-FM Stereo
Press and hold RCL (TIME SET) to set the correct hour.
At
the same time, press and hold the TUNE left arrow
(HR) until the correct hour appears,
Press
and hold RCL (TIME SET) to set the correct
minute.
At the same time, press and hold the TUNE
right
arrow ("IN) until the correct minute appears. ,
Setting the Clock for AM-FM Stereo with
Cassette
Tape Player
Press and hold RCL-PROC (TIME SET) to set the
correct hour. At the same time,
press and hold the
TUNE left arrow (HR) until the correct hour appears.
~ Press and hold RCL-PROG (TIME SET) to set the correct
minute. At the same
time, press and hold the TUNE right
arrow (MIN) until the correct minute appears.
Setting the Clock for AM-FM Stereo with
Cassette Tape and Compact Disc Players
Press and hold the RCL up and down arrow (TIME
SET). At the same time, press and hold the TUNE left
arrow (HR) until the correct hour appears.
Press
and hold the RCL up and down arrow (TIME
SET). At the same time press and hold TUNE right
arrow (MIN) until the correct minute appears.
3-6
ProCarManuals.com

AM-FM Stereo (Option)
To Play the Radio'
Turn the ON-VOL knob to turn the system on or off.
VOL: Turn this knob to adjust the volume.
RCL: Press this button to see the station being played
for a moment. Or, press it
if you want to see the time
when the ignition is off.
Finding a Station
AM-FM: Press this button to get AM or FM. The
lighted display shows your selection.
TUNE: Press the right or left arrow to go to a higher or
lower station. Press and hold to continue tuning and
release when you find your station. The display will
show the frequency of each station tuned.
SEEK: Press the right or left arrow and the radio will
tune to the next higher
or lower station and stay there.
PUSHBUTTONS: The six numbered pushbuttons let
you return to your previously played stations.
You can
set up to
12 stations (six AM and six FM).
1. Tune in the desired station.
2. Press one of the six pushbuttons, for at least
3. The sound will mute and then return when, the station
is stored. Whenever you press that numbered button,
the station you set will return.
two seconds.
4. Repeat
the steps for each pushbutton.
3-7
ProCarManuals.com

Setting the Tone
TREB: Turn this knob to the right to hear more treble.
BASS: Turn this control behind the TREB knob to the
right to hear more bass.
Adjusting the Speakers
FADE: Turn this knob to move the sound between the
front
and rear speakers.
BAL: Turn this control behind the FADE knob to move
the sound between the left and right speakers.
AM-FM Stereo with Cassette Tape Player
(Option)
To Play the Radio
Turn the ON-VOL knob to turn the system on or off.
VOL: Turn this knob to adjust the volume.
RCL: Press this button to see the station being played
for a momettt. Or, press it if you want to see the time
when the ignition is off.
ProCarManuals.com

Finding a Station
AM-FM:
Press this button to get AM, FM1 or FM2.
The lighted display shows your selection.
TUNE: Press the TUNE right or left arrow to go to a
higher or lower station. Press and hold to continue
tuning and release when you find your station. The
display will show the frequency of each station tuned.
SEEK: Press the SEEK right or left arrow and the
radio will tune to
the next higher or lower station and
stay there.
PUSHBUTTONS: The six numbered pushbuttons let
you return to your previously played stations.
You can
set up to 18 stations (six AM, six FM1 and six FM2).
1. Tune in the desired station.
2. Press one of the six pushbuttons, for at least
two seconds.
3. The sound will mute and then return when the station
is stored. Whenever you press that numbered button,
the station you set will return.
4. Repeat the steps for each pushbutton.
PRESET SCAN: Press this button to hear each of your
favorite stations stored
on your pushbuttons for a few
seconds. When you want to stop at a chosen station,
press PRESET
SCAN again.
Setting the Tone
TREB: Turn this knob to the right to hear more treble.
BASS: Turn this control behind the TREB knob to the
right to hear more bass.
Treble and bass cannot be adjusted manually when
TONE SELECT is on.
TONE SELECT Press this button to choose preset
treble and bass equalization settings designed for
ROCK,
NEWS, POP, JAZZ and CLASSICAL.
ROCK will appear when you first press TONE
SELECT.
Each time you press it, another setting will
appear on the display.
If you press it one more time,
after CLASSICAL appears
on the display, tone control
will be back to the treble and bass knob.
3-9
ProCarManuals.com

Adjusting the Speakers
FADE: Turn this knob to move the sound between the
front
and rear speakers.
BAL: Turn this control behind the FADE knob to move
the
sound between the right and left speakers.
Playing a Cassette Tape
Your tape player is built to work best with tapes that are
30 to 45 minutes long on each side. Tapes longer than
that are
so thin they may not work well in this player.
The longer side with the tape visible should face to the
right.
If you hear nothing or hear just a garbled sound, it
may not be in squarely. Press EJECT to remove the tape
and start over,
Once the tape
is playing, use the knobs for VOL, FADE
and BAL, just as you do for the radio. The lighted
arrows show which side of the tape is playing.
MTL: Your bias is set automatically. MTL will appear
on your display when a metal or
chrome tape is inserted.
FF: Press this button to advance rapidly to another part
of the tape. Press
FF, RCLPROG or EJECT to return to
playing speed.
REW Press this button to reverse the tape rapidly. Press
REW or RCLPROG to return to playing speed. If you
press RCLPROG, the tape will also change sides. .
NEXT Press this button to go forward to the beginning
of the next selection. Press the button again or press
RCL/PROG or EJECT to cancel this function.
For
NEXT to work properly, your tape must have at
least
three or four seconds of silence between each
selection. If you press RCLPROG, the tape will also
change sides.
PREV: Press this button to go back to the beginning of
the last selection. Press PREV again or press
RCLPROG
ox EJECT to cancel this function.
RCL/PROG: Press this button to switch from one side
of the tape to the other.
Your cassette tape player can
play continuously because the player
has an
auto-reverse feature.
3-10
ProCarManuals.com

Noise Reduction: Press the button with the double-D
symbol to remove noise from tapes encoded with
Dolby
NR.
Dolby Noise Reduction is manufactured under a license
from Dolby Laboratories Licensing Corporation. Dolby
and the double-D symbol are trademarks
of Dolby
Laboratories Licensing Corporation.
EJECT Press the button with this symbol to remove
the tape and switch to radio.
TAPE: Press this button when the radio is playing to
switch to tape play.
To switch from the tape to the radio
when the tape
is playing, press the AM-FM button.
R-M: Press this button to hear the radio when you are
fast forwarding or reversing
a cassette tape. You can use
the TUNE,
SEEK and PRESET SCAN buttons while in
the radio monitor mode.
CLN: This message may appear on the display. If it
does, your cassette tape player needs to be cleaned.
It
will still play tapes, but you should clean it as soon as
possible to prevent damage to your tapes and player.
See “Care
of Your Cassette Tape Player” in the Index.
After you clean the p1ayer;press and hold EJECT for
five seconds to reset the
CLN indicator. The radio will
display
--- to show the indicator was reset.
AM-FM Stereo with Cassette Tape and
Compact Disc Player (Option)
To Play the Radio
Turn the ON-VOL knob to turn the system on or off.
VOL: Turn this knob to adjust the volume.
RCL: Press this button to see the station being played
for
a moment. Or, press it if you want to see the time
when
the ignition is off.
3-11
ProCarManuals.com