Page 57 of 387
One key is used for the
ignition, the doors and all
other locks.
When a new Tracker is
delivered, the dealer
removes the metal plate
from the key ring and gives
it to the first owner.
The metal plate has a code on it that tells your dealer or
a qualified locksmith how to make extra keys. Keep the
code in a safe place. If you lose your keys, you'll be able
to have new ones made easily using this code.
NOTICE:
Your Geo has a number of features that can help
prevent theft. However, you can have
a lot of
trouble getting into your ,vehicle if you ever lock
your
keys inside. You may even have to damage
your vehicle to get in. So be sure you have an
extra key.
ProCarManuals.com
Page 58 of 387

Door Locks
Unlocked doors can be dangerous.
Passengers
-- especially children -- can easily
open the doors and
fall out. When a door is
locked, the inside handie won't open it.
Outsiders can easily enter through an unlocked
door when you slow down or stop your vehicle.
This may
not be so obvious: You increase the
chance of being thrown out of the vehicle in a
crash if the doors aren't locked. Wear safety belts
properly, lock your doors, and you will be
far
better off whenever you drive your vehicle.
There are several ways to lock and unlock your vehicle.
From the outside, use your key.
To lock the door, turn
the key toward the front of the vehicle.
To unlock the
door, turn the key toward the rear.
To lock the door from
the inside, push down
the button
on the door.
I To unlock it, pull up on
the button.
r -1 "
Power Door Locks (Option)
Push the front of the power
door lock switch to lock all
the doors and the tailgate.
To unlock the doors and
tailgate, push the rear
of the
power
door lock switch.
2-3
ProCarManuals.com
Page 59 of 387

Rear Door Security Locks ($-Door Models)
Your Ge6 is equipped with
rear security door locks that
help prevent passengers
from opening the rear
doors
of your vehicle
from the inside.
To use one of these locks:
1. Move the lever down to engage the lock.
2. Close the door.
3. Do the same to the other rear door lock.
The rear doors of your vehicle cannot be opened from
the inside when this feature
is in use.
,
If you want to open a rear door when the security lock is
on, unlock the door from the inside, then open the door
from the outside.
If you don’t cancel the security lock feature, adults or
older children who ride
in the rear won’t be able to open
the rear door from the inside.
You should let adults and
older children know
how these security locks work, and
how to cancel
the locks.
To cancel the rear door lock:
1. Unlock the door from the inside and open the door
from the outside.
2. Move the lever up to disengage the lock.
3. Do the same for the other rear door.
The rear door locks will now work normally.
Leaving Your Vehicle
If you are leaving the vehicle, take your key, open your
door and set
the locks from inside. Then get out and
close
the door.
2-4
ProCarManuals.com
Page 60 of 387

Tailgate Tailgate Lock Release
It can be dangerous to drive with the tailgate
window open because carbon monoxide (CO) gas
can come into your vehicle.
You can’t see or smell
CO. It can cause unconsciousness and even death.
If you must drive with the tailgate window open
or if electrical wiring or other cable connections
must
pass through the seal between the body and
the tailgate window:
Make sure all windows are shut.
Wrn the fan on your heating or cooling
system to its highest speed with the setting
on
CIRCULATE. That will force outside air
into your vehicle. See “Comfort Controls” in
the Index.
instrument panel, open them all the way.
If you have air outlets on or under the
See
“Engine Exhaust’’ in the Index.
Use your key to lock or
unlock your tailgate.
If you have a convertible, you can still open or close the
tailgate
with the rear window closed.
Theft
Vehicle theft is big business? especially in some cities.
Although
your Geo has a number of theft-deterrent
features, we know that
nothing we put on it can make it
impossible
to steal. However, there are ways you can help.
2-5
ProCarManuals.com
Page 61 of 387

Key in the Ignition
If you leave your vehicle with the keys inside, it’s an
easy target for joy riders or professional thieves -- so
don’t do it.
When you park your Geo and open the driver’s door,
you’ll hear a chime reminding you
to remove your key
from the ignition and take it with
you. Always do this.
Your steering wheel will
be locked, and so will your
ignition. If you have an automatic transmission, taking
your key out also locks your transmission. And
remember
to lock the doors.
Parking at Night
Park in a lighted spat, close all windows and lock your
vehicle. Remember to keep your valuables out of sight.
Put them in a storage area, or take them with you.
New Vehicle 46Break-InS’
I
NOTICE:
Your modern Geo doesn’t need an elaborate
“break-in.” But it will perform better in the long
run if you follow these guidelines:
Keep your speed at 55 mph (88 km/h) or
less for the first 500 miles (804 km).
Don’t drive at any one speed -- fast or
slow
-- for the first 500 miles (804 km).
Don’t make full-throttle starts,
200 miles (322 km) or so. During this time
your new brake linings aren’t
yet broken
in. Hard stops with new linings
can mean
premature wear and earlier replacement.
Follow this breaking-in guideline every
time
you get new brake linings.
See “Towing
a Trailer” in the Index for
more information.
0 Avoid making hard stops for the first
Don’t tow a trailer during break-in.
2-6
ProCarManuals.com
Page 62 of 387

Ignition Positions
4
With the key in the ignition
switch, you can
turn the
switch to four positions.,
LOCK (A): The only position in which you can remove
the key. This locks your steering wheel, ignition and
automatic transmission.
If you have an automatic transmission, the ignition
switch can’t be turned to LOCK unless the shift lever is
in the
PARK (P) position.
ACC (B): The position that you can operate your
electrical power accessories. It unlocks the steering
wheel and ignition. Use this position if your vehicle
must be pushed or towed.
ON (C): The position in which the switch returns to
after you start your engine and release the switch. The
switch stays in the
ON position when the engine is
running. But even when the engine is not running, you
can use ON to operate your electrical power accessories
and to display some instrument panel warning and
indicator lights.
START (D): The position in which the engine starts.
When the engine starts, release the key. The ignition
switch
will return to ON for normal driving.
When the engine is not running, ACC and
ON allow you
to operate your electrical accessories, such as the radio
and ventilation fan.
A warning chime will sound if you open the driver’s
door when the ignition is in ACC or LOCK and the key
is in the ignition.
2-7
ProCarManuals.com
Page 63 of 387

A CAUTION:
On manual transmission vehicles, turning the key to
LOCK will lock the steering column and result in a
loss of ability to steer the vehicle. This could cause a
collision. If you need to turn the engine off while the
vehicle
is moving, turn the key only to ACC. Don’t
push the key in while the vehicle is
moving.
NOTICE:
If your key seems stuck in LOCK and you can’t
turn it, be sure it
is all the way in, If it is, then
turn the steering wheel left and right while
you
turn the key hard. But turn the key only with
your hand.~Using
a tool to force it could break
the key or the ignition switch. If none of this
works, then your vehicle needs service.
Starting Your Engine
Automatic transmission
Move your shift lever to PARK (P) or NEUTRAL (N).
Your engine won’t start in any other position -- that’s a
safety feature. To restart when you’re already moving,
use NEUTRAL (N) only.
NOTICE:
~~
Don’t try to shift to PARK (P) if your Geo is
moving. If you do, you could damage the
transmission. Shift to
PARK (P) only when your
vehicle is stopped.
Manual transmission
The geax selector should be in NEUTRAL (N). Hold the
clutch pedal to
the floor and start the engine. Your
vehicle won’t
start if the clutch pedal is not all the way
down -- that’s a safety feature.
ProCarManuals.com
Page 64 of 387

Starting Your 1.6 Liter Engine
1. Without pushing the accelerator pedal, turn your
ignition key to START. When the engine starts, let
go of the key.
NOTICE:
Holding your key in START for longer than
15 seconds at a time will cause your battery to
be drained much sooner. And the excessive heat
can damage your starter motor.
2. If it doesn’t start right away, hold your key in
START for about three seconds at a time until your
engine starts. Wait about
15 seconds between each
try to help avoid draining your battery.
If your engine still won’t start, call your dealer for help.
NOTICE:
Your engine is designed to work with the
electronics in your vehicle.
If you add electrical
parts or accessories, you could change the way
the engine operates. Before adding electrical
equipment, check with your dealer.
If you don’t,
your engine might not perform properly.
If you ever have to have your vehicle towed, see
the part of this manual that tells how to do it
without damaging your vehicle. See “Towing
Your Vehicle” in the Index.
2-9
ProCarManuals.com