Cruise Control
Troubleshooting
NOTE:
The numbers in the table show the troubleshooting sequence.
Before troubleshooting,
— Check the No. 1 (10 A) and the No. 4 (15 A)*1 or (20 A)*2 fuses in the under-dash fuse/relay box, and the No. 30 (20 A)
fuses in the under-hood fuse/relay box.
— Check that the horns sound.
— Check the tachometer to see if it works properly.ProCarManuals.com
6. Check for continuity between the terminals of the
combination switch harness connector in each switch
position according to the table.
If there is continuity, and it matches the table,
the switch is OK.
If there is no continuity in one or both positions,
go to step 7.
7. Carefully remove the cruise control set/resume/cancel
switch cover by prying between the cover and the
switch in the sequence shown.
CRUISE CONTROL
SET/RESUME/CANCEL
SWITCH
CRUISE CONTROL
SET/RESUME/CANCEL
SWITCH COVER
8. Remove the two screws, and disconnect the 4P con-
nector. Then remove the switch.
SET/RESUME/CANCEL SWITCH
SCREWS
TERMINAL SIDE OF
MALE TERMINALS
9. Check for continuity between the terminals in each
switch position according to the table.
If there is continuity, and it matches the table,
replace the cable reel.
If there is no continuity in one or both positions,
replace the switch.
10. If all the tests prove OK, reconnect the battery cables,
and enter the anti-theft code for the radio. Then enter
the customer's radio station presets.ProCarManuals.com
