Page 41 of 356
Downloaded from www.Manualslib.com manuals search engine Securing a Child Restraint in the Center Front Seat Position (Bench Seat-Except
60140 Split-Bench Seat)
KO891
Don’t use child restraints in the center position of a 60/40 split-bench seat.
When you secure a child restraint in a center seating position, you’ll be using
the lap belt. See the earlier part about the top strap
if the child restraint has
one.
1. Make the belt as long as possible by tilting the latch plate \
and pulling it
along the belt.
AN163060
1-27
Page 42 of 356

Downloaded from www.Manualslib.com manuals search engine Seats & Safety Belts
2. Put the restraint on the seat. Follow the instructions for the child
restraint.
3. Secure the child in the child restraint as the instructions say. c
4. Run the vehicle’s safety belt through or around the restraint. The child
restraint instructions will show you how.
AM163061
5. Buckle the belt. Make sure the release button faces upward or \
outward,
6. To tighten the belt, pull its free end while you push down on the child
so you’ll be able to unbuckle it quickly if you ever need to.
restraint.
7. Push and pull the child restraint in different directions to be sure it is
secure. If the child restraint isn’t secure, turn the latch \
plate over and
buckle it again. Then see
if it is secure. If it isn’t, secure the restraint in
a different place
in the vehicle and contact the child restraint maker for
their advice.
To remove the child restraint, just unbuckle the vehicle’s safe&\
belt. It will be
ready to work for an adult or larger child passenger,
1-28
I.
.. .
.
Page 43 of 356
Downloaded from www.Manualslib.com manuals search engine . .’ .
Jump Seats (Extended Cab)
Dlon’t use child restraints in these positions. The restraint\
s won’t work ..a*--
properly.
..
d y&&:3, E ‘&&&?&*- . ..
,,,A, l fj
60/40 Split-Bench Seat
Don’t use a child restraint in this position. The restraint won’t work properly.
Page 44 of 356
Downloaded from www.Manualslib.com manuals search engine Seats & Safety Belts
Securing a Child Restraint in the Right Front Seat Position
KO833
You’ll be using the lap-shoulder belt. See the earlier part about the top strap
if the child restraint has one.
1. Put the restraint on the seat. Follow the instructions for the\
child
2. Secure the child in the child restraint as the instructions say.
3. Pull out the vehicle’s safety belt and run the lap part th\
rough or around
the child restraint. The child restraint instructions
will show you how. See
if the shoulder belt would go in front of the child’s face or neck. If so,
put it behind the child restraint.
restraint.
!
AN165021
1 -30
Page 45 of 356
Downloaded from www.Manualslib.com manuals search engine 4. Buckle the belt. Make sure the- release button faces upward or outward,
5. Pull the rest of the lap belt all the way out of the retractor to set the
so you'll be able to unbuckle it quickly if you ever need to.
lock.
AN165148 AN1 65027
6. To tighten the belt, feed the lap belt back into the retractor w\
hile you
push down on the child restraint.
AN165146
7. Push and pull the child restraint in different directions to be sure it is
secure.
1-31
Page 46 of 356
Downloaded from www.Manualslib.com manuals search engine Seats & Safety Belts
If you're using a bucket seat, adjust the seat forward until the \
lap portion of
the safety belt holds the restraint firmly. But, don't move it any more than
needed to tighten the lap belt.
To remove the child restraint, unbuckle the vehicle's safety belt \
and let it go
back all the way. The safety belt
will move freely again and be ready to work
for an adult or larger child passenger.
Larger Children
I/
AN170071
Children who have outgrown child restraints should wear the veh\
icle's safety
belts.
If you have the choice, a child should sit next to a window so \
the child
can wear a lap-shoulder belt and get the additional restraint \
a shoulder belt
can provide.
Children who aren't buckled up can be thrown out in a crash. \
. .. .- i,. : .' ..
r: ! -1
i.
..
..
..
132
Page 47 of 356
Downloaded from www.Manualslib.com manuals search engine PO355
Children who aren’t buckled can strike other people who are.
I
I
AM170052
Never do this.
A Here two children are wearing the same belt. The belt can’t properly \
spread the impact forces. In a crash, the
two children can be
crushed together and seriously injured.
A belt must be used by only
one person at a time.
1-33
Page 48 of 356

Downloaded from www.Manualslib.com manuals search engine f
.-
Seats & Safety Belts
Q: What if a child is wearing a lap-shoulder belt, but the child is so
small that the shoulder belt is very close to the child’s face or neck?
A: Move the child toward the center of the vehicle, but be sure that the
shoulder belt still
is on the child’s shoulder, so that in a crash the child’s
upper body would have the restraint that belts provide.
If the child is so small
that the shoulder belt
still is very close to the child’s face or neck, you might
want
to place the child in a seat that has a lap belt, if your vehicle has one.
I’ -
AM170051
Never do this.
A Here a child is sitting in a seat that has a lap-shoulder be\
lt, but the
shoulder part is behind the child.
If the child wears the belt in this
way, in a crash the child might slide under the belt. The belt’\
s force
would then be applied right on the child’s abdomen. That co\
uld
cause serious or fatal injuries.
Wherever the child sits, the lap portion of the belt should b\
e worn low and
snug
on the hips, just touching the child’s thighs. This applies bel\
t force to
the child’s pelvic bones in a crash.
1-34