1987 MAZDA 626 torque

FRONT DISC BRAKE 11
13. Lower the caliper assembly onto the mounting
support.
14. Tighten the mounting bolt to the specified torque.
Tightening torque:
31—41 N-m (3.2—4.2 m-kg, 23—30 ft-lb)
76G11X-076
15. Mount the wheels.
16. Apply the brakes a few times; then turn the wheels
and check that the brakes do not drag excessively.
17. Lower the vehicle.
18. Tighten the wheel lug nuts.
Tightening torque:
88—118 N-m (9.0—12.0 m-kg, 65—87 ft-lb)
76G11X-077
11—41

1 1 FRONT DISC BRAKE
INSTALLATION
1. Install in the reverse order of removal.
2. Tighten all nuts and bolts to the specified torque, referring to torque specifications.
3. After installation:
(1) Add brake fluid and bleed air. (Refer to page 11—9.)
(2) Depress the brake pedal a few times and check that the front brakes do not drag excessively
while the wheels are being rotated.
Note
Refer to page 11—40 for pad installation.
Torque specifications
76G11X-047
11—46

1 1 REAR DISC BRAKE
86U11X-087
86U11X-088
13. Lift the caliper assembly onto the mounting
support.
14. Tighten the mounting bolt to the specified torque.
Tightening torque:
16—24 Nm (1.6—2.4 m-kg, 12—17 ft-lb)
15. Connect the parking cable end to the operating
lever; then tighten the locknut.
Tightening torque:
20—28 N-m (2.0—2.9 m-kg, 14—21 ft-lb)
Caution
There must be no clearance between the ca-
ble end and the operating lever.
16. Mount the wheels.
17. Apply the brakes a few times; then check that the
brakes do not drag excessively while the wheels
are being rotated.
18. Lower the vehicles.
19. Tighten the wheel lug nuts.
Tightening torque:
88—118
N
m (9—12 m-kg, 65—87 ft-lb)
76G11X-083
11-48

REAR DISC BRAKE 1 1
INSTALLATION
1. Install in the reverse order of removal, referring to installation note for the specially marked parts.
2. Tighten all nuts and bolts to the specified torque, referring to torque specifications.
3. After installation:
(1) Add brake fluid and bleed air. (Refer to page 11—9.)
(2) Adjust the parking brake lever stroke. (Refer to page 11 —65.)
(3) Depress the brake pedal a few times and check that the rear brakes do not drag excessively
while the wheels are being rotated.
Note
Refer to page 11—47 for pad installation.
Torque specifications
1. Parking brake cable
Installation Note
Parking brake cable
Connect the parking brake cable end onto the oper-
ating lever; then fix it to the bracket by the locknut.
Caution
There must be no clearance between the ca-
ble end and the operating lever.
86U11X-107
11-55

REAR DRUM BRAKE 1 1
5. Fit of drum and lining
(1) Apply chalk to the inside of the drum.
(2) Rub the shoe against the drum.
(3) Check lining to drum contact.
(4) After checking, remove chalk.
2. Tighten all nuts and bolts to the specified torque, referring to torque specifications.
3. After installation:
(1) Add brake fluid and bleed air. (Refer to page 11—9.)
(2) Adjust the parking brake lever stroke. (Refer page to 11—65.)
(3) Depress the brake pedal a few times and check that the rear brakes do not drag while the wheels
are being rotated.
Torque specification
86U11X-120
INSTALLATION
1. Install in the reverse order of removal.
76G11X-050
11—61

1 1 REAR DRUM BRAKE
Torque specification
1. Brake shoe 2. Brake drum
98—177 N m (10—18 m-kg, 72—130 ft-lb)
3. Locknut
86U11X-122
installation Note
Brake shoes
1. Apply grease to:
(1) Shoe and cylinder contact points
(2) Shoe anchor points
(3) Projections of backing plate
76G11X-088
11-62

1 1 REAR DRUM BRAKE
Brake drum
1. Move the quadrant against the backing plate with
a screwdriver and increase the shoe clearance.
2. Install the brake drum.
Note
The shoe clearance will be automatically ad-
justed by applying the parking brakes.
76G11X089
Locknut
Tighten the new locknut to the specified torque and
securely stake it to the spindle groove.
Tightening torque:
98—177
N
m (10—18 m-kg, 72—130 ft-lb)
Caution
Do not use a pointed tool for staking.
86U11X-129
11-64

PARKING BRAKE 1 1
INSTALLATION OF PARKING BRAKE CABLE
1. Install in the reverse order of removal, referring to installation note for specially marked parts.
2. Tighten all nuts and bolts to the specified torque, referring to torque specifications.
3. After installation:
(1) Adjust the parking brake lever stroke. (Refer to page 11—65.)
(2) Depress the brake pedal a few times and check that the rear brakes do not drag while the wheels
are being rotated.
Torque specifications
Rear drum brake
76G11X-053
11-69