2024 MAZDA CX90 Owners Manual

Remaining Charge and Temperature
of the High Voltage Battery
If the high voltage battery level is low
or the high voltage battery temperature
is low, the vehicle speed may not
increase even if the accelerator pedal is
depressed because the motor output is
restricted. Check the contents
displayed in the instrument cluster and
the remaining amount of power in the
high voltage battery before driving.
(Battery cooling)
If the high voltage battery temperature
is high after driving the vehicle, it is
possible to cool the high voltage
battery while the vehicle is parked to
extend the life of the high voltage
battery. If the Excessive Battery
Te m p e ra t u r e notification is displayed
on the center display after driving the
vehicle, select Start to start the battery
cooling.
NOTE
Because the electrical power of the
high voltage battery is used by the
battery cooling , we recommend that
the charge connector is connected
while the battery cooling is operating.
Driving
e-SKYACTIV PHEV
5-26
CX-90_8KG7-EA-22L_Edition1_new 2022-11-17 16:05:04

Instrument Cluster
The screen display informs you of the vehicle information.
ƒDisplays the power meter and the tachometer.
The display
differs depending on the drive mode.
„ Displays the speedometer and vehicle information using messages.
Changes depending on the drive mo de and the system being used.
… Displays the high voltage battery power gauge and the fuel gauge.
The display is changed using the INFO switch.
† Displays the ambient temperature/odo meter/trip meter, maximum driving
distance, and vehicle information using messages.
Driving
Instrument Cluster
5-27
CX-90_8KG7-EA-22L_Edition1_new 2022-11-17 16:05:04

How to Use the Instrument Cluster
Driving
Instrument Cluster
5-28
CX-90_8KG7-EA-22L_Edition1_new2022-11-17 16:05:04

The display changes each time the INFO switch is pressed.
1. Basic display
2. Average electrical power consumption rate display
Driving
Instrument Cluster
5-29
CX-90_8KG7-EA-22L_Edition1_new 2022-11-17 16:05:04

Average fuel economy display
Instantaneous electrical power consumption rate display
Instantaneous fuel economy display
3. High voltage battery temperature gauge Engine coolant temperature gauge
4. i-ACTIVSENSE status symbol (Warning/Risk avoidance support system)
5. Compass display
6. Message display
*1
*1 Displayed only when a warning occurs.
The screen will switch automatically when some i-ACTIVSENSE systems are used.
Driving
Instrument Cluster
5-30
CX-90_8KG7-EA-22L_Edition1_new 2022-11-17 16:05:04

Convenient Ways to Usethe Instrument Cluster
Display information can be switched
using Settings in Mazda Connect.
Refer to the Settings section in the
Mazda Connect Owner's Manual.
Speedometer
The speedometer indicates the speed
of the vehicle.
Driving
Instrument Cluster
5-31
CX-90_8KG7-EA-22L_Edition1_new 2022-11-17 16:05:04

Tachometer
The tachometer shows engine speed in
thousands of revolutions per minute
(rpm).
Displays while driving in SPORT
mode/OFF-ROAD mode/TOWING
mode.
Refer to How to Use the Mazda
intelligent Drive Select (Mi-Drive) on
page 5-96.
CAUTION
Do not run the engine with the
tachometer needle in the RED ZONE.
This may cause severe engine damage.

1. STRIPED ZONE
2. RED ZONE
NOTE
When the tachometer needle enters
the STRIPED ZONE, this indicates to
the driver that the gears should be
shifted before entering the RED ZONE.
Odometer/Trip Meter
Odometer
The odometer records the total
distance the vehicle has been driven.
Tr i p m e te r
The driving distance for a specified
interval is indicated. Two types (TRIP A,
TRIP B) of interval distance can be
measured.
Driving
Instrument Cluster
5-32
CX-90_8KG7-EA-22L_Edition1_new 2022-11-17 16:05:04

How to Use the
Odometer/Trip Meter

The display changes each time the TRIP
switch is pressed.
1. Odometer display
2. Trip meter A display
3. Trip meter B display

When returning the trip meter to “0”,
press the TRIP switch for 2 seconds or
longer while the trip meter is
displayed.
NOTE
If the lead-acid battery is disconnected
for vehicle maintenance or other
reasons, the trip meter display returns
to “0”.
High Voltage Battery Temperature Gauge
Displays the high voltage battery
temperature. The blue range of the
gauge indicates that the high voltage
battery temperature is low and the red
range indicates that it is high and
overheating.

Driving
Instrument Cluster
5-33
CX-90_8KG7-EA-22L_Edition1_new 2022-11-17 16:05:04