2023 GENESIS G80 Owners Manual

7-81
07
60$57&58,6(&21752/

7-82
Driver Assistance System
Smart Cruise Control Settings
Setting features
ORG3EV071028L
Turning on Smart Cruise Control

[Press the Driving Assist () button
to turn on Smart Cruise Control. The
speed will be set to the current speed
on the cluster.

[If there is no vehicle in front of you,
the set speed will be maintained, but
if there is a vehicle in front of you,
the speed may decrease to maintain
the distance to the vehicle ahead. If
the vehicle ahead accelerates, your
vehicle will travel at a steady cruising
speed after accelerating to the set
speed.
Information
If your vehicle speed is between 0~ 20 mph
(0~ 30 km/h) when you press the Driving
Assist (
) button, the Smart Cruise
Control speed will be set to 20 mph (30
km/h).
ORG3EV071121L
Setting vehicle distance
Each time the button is pressed, the
headway changes as follows:
Distance 4 Distance 3
Distance 1Distance 2
Information

[If you drive at 56 mph (90 km/h), the
distance is maintained as follows:
Distance 4 -
approximately 172 ft. (53 m)
Distance 3 -
approximately 130 ft. (40 m)
Distance 2 -
approximately 106 ft. (30 m)
Distance 1 -
approximately 82 ft. (25 m)

[The distance is set to the last set
distance when the vehicle is restarted,
or when Smart Cruise Control was
temporarily canceled.

7-83
07
ORG3EV071122L
Increasing set speed

[Push the + switch up and release
it immediately. The set speed will
increase by 1 mph (1 km/h) each time
the switch is operated in this manner.

[Push the + switch up and hold it while
monitoring the set speed on the
cluster. The set speed will increase by
5 mph (10 km/h) each time the switch
is operated in this manner. Release
the switch when the desired speed is
shown, and the vehicle will accelerate
to that speed. You can increase the set
speed to 120 mph (200 km/h).
WARNING
&KHFNWKHGULYLQJFRQGLWLRQEHIRUH
XVLQJWKHVZLWFK'ULYLQJVSHHGPD\
VKDUSO\LQFUHDVHZKHQ\RXSXVKXSDQG
KROGWKHVZLWFK
ORG3EV071123L
Decreasing set speed

[Push the - switch down and release
it immediately. The set speed will
decrease by 1 mph (1 km/h) each time
the switch is operated in this manner.

[Push the - switch down and hold it
while monitoring the set speed on the
cluster. The set speed will decrease by
5 mph (10 km/h) each time the switch
is operated in this manner. Release
the switch at the speed you want to
maintain. You can decrease the set
speed to 20 mph (30 km/h).

7-84
Driver Assistance System
ORG3EV071124
To temporarily cancel Smart Cruise
Control
Press the switch or depress the
brake pedal to temporarily cancel Smart
Cruise Control.
ORG3EV071125
To resume Smart Cruise Control
To resume Smart Cruise Control after the
function was canceled, operate the +, -
or
switch.
If you press the + switch up or - switch
down, vehicle speed will be set to the
current speed on the cluster.
If you push the
switch, vehicle speed
will resume to the preset speed.
WARNING
&KHFNWKHGULYLQJFRQGLWLRQEHIRUH
using the VZLWFK'ULYLQJVSHHG
PD\VKDUSO\LQFUHDVHRUGHFUHDVHZKHQ
\RXSUHVVWKH
VZLWFK
ORG3EV071028L
To turn off Smart Cruise Control
Press the Driving Assist () button to
turn Smart Cruise Control off.
Information
If your vehicle is equipped with Manual Speed
Limit Assist, press and hold the Driving Assist
(
) button to turn off Smart Cruise Control.
However Manual Speed Limit Assist will turn on.
Based on Drive Mode
Smart Cruise Control will change
acceleration based on the drive mode
selected from Drive Mode Integrated
Control system. Refer to the following chart.
'ULYHPRGHSmart Cruise Control
COMFORT Normal
ECO Slow
SPORT Fast
MY DRIVE
(CUSTOM)Depending on power
train mode
SNOW Normal
Information

[For more details on drive mode, refer
to “Drive Mode Integrated Control
System” section in chapter 6.

[Smart Cruise Control may not turn on
or off in some of the drive modes for the
operating conditions are not satisfied.

[If your vehicle is not equipped with
Drive Mode Integrated Control system,
Smart Cruise Control accelerates your
vehicle at a standard level.

7-85
07
ORG3EV071348AU
Based on Driving Style (if equipped)

[With the vehicle on, if ‘Driver
$VVLVWDQFH

7-86
Driver Assistance System
ORG3EV071342AU
Warning Volume
With the vehicle on, select ‘Driver
$VVLVWDQFH

7-87
07
Overtaking Acceleration Assist
Overtaking Acceleration Assist operates
when the turn signal indicator is turned
on to the left while Smart Cruise Control
is operating, and the following conditions
are satisfied:

[Your vehicle speed is above 40 mph
(60 km/h)

[The hazard warning flasher is off

[A vehicle is detected in front of your
vehicle

[Deceleration is not needed to
maintain distance with the vehicle in
front
WARNING

[When the turn signal indicator is
turned on to the left while there is
DYHKLFOHDKHDGWKHYHKLFOHPD\
DFFHOHUDWHWHPSRUDULO\3D\DWWHQWLRQ
WRWKHURDGFRQGLWLRQVDWDOOWLPHV

[5HJDUGOHVVRI\RXUFRXQWULHVGULYLQJ
GLUHFWLRQ2YHUWDNLQJ$FFHOHUDWLRQ
Assist will operate when the
FRQGLWLRQVDUHVDWLVILHG:KHQ
using the function in countries with
GLIIHUHQWGULYLQJGLUHFWLRQDOZD\V
check the road conditions at all
WLPHV
Display and Control
Basic function
You can see the status of the Smart
Cruise Control operation in the Driving
Assist view on the cluster. Refer to “View
Modes” section in chapter 4.
Smart Cruise Control will be displayed
as below depending on the status of the
function.
„Operating„Temporarily canceled
ORG3EV071037NORG3EV071298N

[When operating
(1) Whether there is a vehicle ahead
and the selected distance level are
displayed.
(2) Set speed
(3) Whether there is a vehicle ahead and
the target vehicle distance

[When temporarily canceled
(1)
indicator
(2) The previous set speed is shaded.
(3) Whether there is a vehicle ahead (if
equipped)

7-88
Driver Assistance System
Information

[The distance of the front vehicle on the
cluster is displayed based on the actual
distance between your vehicle and the
vehicle ahead.

[The target distance may vary according
to the vehicle speed and the set
distance level. If the vehicle speed is
low, even though the vehicle distance
have changed, the change of the target
vehicle distance may be small.

[The images and colors in the
instrument cluster may differ
depending on the cluster type or theme
selected from the instrument cluster.
Accelerating temporarily
ORG3EV072039N
If you want to speed up temporarily
without altering the set speed while
Smart Cruise Control is operating,
depress the accelerator pedal. While the
accelerator pedal is depressed, the set
speed, distance level and target distance
will blink on the cluster.
However, if the accelerator pedal is
depressed insufficiently, the vehicle may
decelerate.
WARNING
Be careful when accelerating
WHPSRUDULO\EHFDXVHWKHVSHHGDQG
GLVWDQFHLVQRWFRQWUROOHGDXWRPDWLFDOO\
HYHQLIWKHUHLVDYHKLFOHLQIURQWRI\RX
Based on Driving Style operating
ORG3EV071040LORG3EV071041N
When Based on Driving Style is
operating, ‘Driving Style Adaptive SCC’
message will appear on the cluster for
2 seconds, and the distance level and
target distance will be displayed based
on the driving style.