2022 TOYOTA AYGO X Owners Manual (in English)

8
343
Owner's Manual_Europe_M99V08_en
8
Vehicle specifications
Vehicle specifications
8-1. Specifications
Maintenance data (fuel, oil
level, etc.) ....................... 344
Fuel information ................ 353
8-2. Customization
Customizable features ...... 354
8-3. Initialization
Items to initialize ............... 361

344
Owner's Manual_Europe_M99V08_en
8-1. Specifications
8-1.Spec ific ations
*1: Unladen vehicles
■Vehicle identification number
The vehicle identification number
(VIN) is the legal identifier for your
vehicle. This is the primary identifi-
cation number for your Toyota. It is
used in registering the ownership of
your vehicle.
This number is stamped under the
right-hand front seat.
This number is also on the manu-
facturer’s label.
■Engine number
The engine number is stamped on
the engine block as shown.
Maintenance data (fuel, oil level, etc.)
Dimensions and weights
Overall length3700 mm (145.7 in.)
Overall width1740 mm (68.5 in.)
Overall height*11510 mm (59.5 in.)
Wheelbase2430 mm (95.7 in.)
TreadFront1540 mm (60.6 in.)
Rear1515 mm (59.7 in.)
Gross vehicle mass1360 kg (2998.8 lb.)
Maximum permissible axle
capacity
Front815 kg (1797.0 lb.)
Rear745 kg (1642.7 lb.)
Vehicle identification

345
8
Owner's Manual_Europe_M99V08_en
8-1. Specifications
Vehicle specifications
Engine
Model1KR-FE
Ty p e3-cylinder in line, 4-cycle, gasoline
Bore and stroke71.0  84.0 mm (2.79  3.30 in.)
Displacement998 cm3 (60.9 cu. in.)
Valve clearance (engine cold)
Intake: 0.145 mm - 0.235 mm (0.006 -
0.009 in.)
Exhaust: 0.275 mm - 0.365 mm (0.011 -
0.014 in.)
Drive belt tensionAutomatic adjustment
Fuel
Fuel type
When you find these types of fuel label at
the gas station, use only the fuel with one
of the following labels.
EU area:
Unleaded gasoline conforming to Euro-
pean standard EN228 only
Except EU area:
Unleaded gasoline only

346
Owner's Manual_Europe_M99V08_en
8-1. Specifications
■Oil capacity (Drain and refill
[Reference*])
*: The engine oil capacity is a reference
quantity to be used when changing
the engine oil. Warm up and turn off
the engine, wait more than 5 minutes,
and check the oil level on the dip-
stick.
■Engine oil selection
Gasoline Engine 
“Toyota Genuine Motor Oil” is used
in your Toyota vehicle. Toyota rec-
ommends the use of approved
“Toyota Genuine Motor Oil”.
Another motor oil of matching qual-
ity can also be used.
Oil grade:
0W-16:
API grade SN “Resource-Conserv-
ing”, SN PLUS “Resource-Conserv-
ing” or SP “Resource Conserving”;
or ILSAC GF-6B multigrade engine
oil
0W-20 and 5W-30:
API grade SM “Energy-Conserv-
ing”, SN “Energy- Conserving”, SN
PLUS “Resource-Conserving” or
SP “Resource-Conserving”; or
ILSAC GF-6A multigrade engine oil
Recommended viscosity (SAE):
Preferred
Temperature range anticipated
before next oil change
SAE 0W-16 is filled into your Toyota
vehicle at manufacturing, and the
best choice for good fuel economy
and good starting in cold weather. If
SAE 0W-16 oil is not available,
SAE 0W-20 oil may be used. How-
ever, it should be replaced with
SAE 0W-16 at the next oil change.
Oil viscosity (0W-16 is explained
here as an example):
• The 0W in 0W-16 indicates the
characteristic of the oil which
allows cold startability. Oils with a
lower value before the W allow
Research Octane Number95 or higher
Fuel tank capacity
(Reference)35.0 L (9.2 gal., 7.7 Imp. gal.)
Lubrication system
With filter2.8 L (3.0 qt., 2.5 Imp. qt.)
Without fil-
ter2.5 L (2.6 qt., 2.2 Imp. qt.)

347
8
Owner's Manual_Europe_M99V08_en
8-1. Specifications
Vehicle specifications
for easier starting of the engine
in cold weather.
• The 16 in 0W-16 indicates the
viscosity characteristic of the oil
when the oil is at high tempera-
ture. An oil with a higher viscos-
ity (one with a higher value) may
be better suited if the vehicle is
operated at high speeds, or
under extreme load conditions.
How to read oil container labels:
Either or both API registered marks
are added to some oil containers to
help you select the oil you should
use.
API Service Symbol
Top portion: “API SERVICE SP” means
the oil quality designation by American
Petroleum Institute (API).
Center portion: “SAE 0W-16” means
the SAE viscosity grade.
Lower portion: “Resource-Conserving”
means that the oil has fuel-saving and
environmental protection capabilities.
ILSAC Certification Mark
The International Lubricant Specifica-
tion Advisory Committee (ILSAC) Certi-
f ic at i o n M ar k i s d is pl a ye d on t h e f r o nt o f
the container.

348
Owner's Manual_Europe_M99V08_en
8-1. Specifications
*1: Except for Cyprus and Malta
*2: For Cyprus and Malta
*3: Manual transmission
*4:Multidrive
Cooling system
Capacity (Reference)
4.1 L (4.3 qt., 3.6 Imp. qt.)*1, 3
4.6 L (4.9 qt., 4.0 Imp. qt.)*1, 4
4.7 L (5.0 qt., 4.1 Imp. qt.)*2, 3
5.4 L (5.7 qt., 4.8 Imp. qt.)*2, 4
Coolant type
Use either of the following:
 “Toyota Super Long Life Coolant”
 Similar high-quality ethylene glycol-based non-sili-
cate, non-amine, non-nitrite, and non-borate coolant
with long-life hybrid organic acid technology
Do not use plain water alone.
Ignition system (spark plug)
MakeDENSO FC16HR-Q8
Gap0.8 mm (0.031 in.)
NOTICE
■Iridium-tipped spark plugs
Use only iridium-tipped spark plugs. Do not adjust the spark pl ug gap.
Electrical system (battery)
Open voltage at 20°C (68°F):
12.3 V or higher
(Turn the engine switch off and turn on the high
beam headlights for 30 seconds.)
Charging rates
Quick charge
Slow charge
15 A max.
5 A max.

349
8
Owner's Manual_Europe_M99V08_en
8-1. Specifications
Vehicle specifications
*: The fluid capacity is a reference quantity.
If replacement is necessary, contact any authorized Toyota reta iler or Toyota
authorized repairer, or any reliable repairer.
Multidrive
Fluid capacity*5.22 L (5.5 qt., 4.6 Imp. qt.)
Fluid typeToyota Genuine CVT Fluid FE
NOTICE
■Multidrive fluid type
Using Multidrive fluid other than the above type may cause abno rmal noise or vibration, or damage the Multidrive of your vehicle.
Manual transmission
Gear oil capacity (Reference)1.7 L (1.8 qt., 1.5 Imp. qt.)
Gear oil type“TOYOTA Genuine Manual Transmission Gear
Oil LV GL-4 75W” or equivalent
NOTICE
■Manual transmission gear oil type
●Please be aware that depending on the particular characteristic s of the gear oil used or the operating conditions, idle sound, shift feeling and /or fuel efficiency may be different or affected and, in the worst case, damage to the vehicle’s
transmission. Toyota recommends to use “TOYOTA Genuine Manual Transmission Ge ar Oil LV GL-4 75W” to achieve optimal performance.
●Your Toyota vehicle is filled with “TOYOTA Genuine Manual Trans mission Gear Oil LV GL-4 75W” at the factory.
Use Toyota approved “TOYOTA Genuine Manual Transmission Gear Oi l LV GL- 4 75W” or an equivalent oil of matching quality that satisfies the above specifica- tions.
Please contact any authorized Toyota retailer or Toyota authori zed repairer, or any reliable repairer for further details.
Clutch (Manual transmission)
Pedal free play3  15 mm (0.1  0.6 in.)
Fluid typeSAE J1704 or FMVSS No.116 DOT 4

350
Owner's Manual_Europe_M99V08_en
8-1. Specifications
*1: Minimum pedal clearance when depressed with a force of 300 N (31.0 kgf, 67.4
lbf) while the engine is running.
*2: Parking brake lever travel when pulled up with a force of 200 N (20.4 kgf, 45.0
lbf)
17-inch tires
18-inch tires
Brakes
Pedal clearance*184 mm (3.3 in.) Min.
Pedal free play1  6 mm (0.04  0.24 in.)
Parking brake lever travel*25  8 clicks
Fluid typeSAE J1704 or FMVSS No.116 DOT 4
Steering
Free playLess than 30 mm (1.2 in.)
Tires and wheels
Tire size175/65R17 87H
Tire inflation pres-
sure
(Recommended
cold tire inflation
pressure)
Front wheel
kPa (kgf/cm2 or bar, psi)
Rear wheel
kPa (kgf/cm2 or bar, psi)
260 (2.6, 37)240 (2.4, 35)
Wheel size17  5J
Wheel bolt torque140 N•m (14.3 kgf•m, 103 ft•lbf)
Tire size175/60R18 85H
Tire inflation pres-
sure
(Recommended
cold tire inflation
pressure)
Front wheel
kPa (kgf/cm2 or bar, psi)
Rear wheel
kPa (kgf/cm2 or bar, psi)
260 (2.6, 37)240 (2.4, 35)
Wheel size18  5J
Wheel bolt torque140 N•m (14.3 kgf•m, 103 ft•lbf)