Page 425 of 537

%
Ifth e engine oils listed in theta ble are not
av ailable, you may add a maximum of 1.0 litre
of thefo llowing engine oils once onl y.
Engine oils for one-time /lling only in exceptional
cases:
R Mer Mer cedes-Ma
cedes-Ma ybac
ybach S 450:
h S 450: MB-Freigabe or
MB-Appr oval 229.31 or ACEA C3
R Mer
Mer cedes-Ma
cedes-Ma ybac
ybach S 580; Mer
h S 580; Mer cedes-May-
cedes-M ay-
bac
bac h S 680:
h S 680: MB-Freigabe or MB-Appr oval
229.51 or ACEA C3
The following values referto an oil change, includ-
ing the oil /lter.
Engine oil
Engine oil /lling
/llingcapacity
capacity Model
Model
Capacity
Capacity
Mercedes-Maybach S
450 8.0 l
Mercedes-Maybach S
580 8.5 litres
Mercedes-Maybach S
680 10.0 litres N No
ot
tes on br
es on br ak
ake
e0uid
0uid No
tethe inst ructions about operating 0uids
(/ page 417). &
W
WARNING
ARNING Risk of an accident due to
va pour poc kets form ing in the brake sys-
tem
The brake 0uid constantly absorbs moisture
from the air. This lo wersthe boiling point of
th e brake 0uid. If the boiling point is too lo w,
va pour poc kets may form inthe brake system
when the brakes are applied hard.
This impairs the braking e.ect. #
Have the brake 0uid rene we d at the
speci/ed inter vals. Ha
ve the brake 0uid regula rly re placed at a quali-
/ed specialist workshop.
Only use a brake 0uid appr ovedby Mercedes-
Benz according toMB-F reigabe or MB-Appr oval
331.0. Coolant Coolant
N
No
ot
tes on coolant
es on coolant
Obser vethe no tes on operating 0uids
(/ page 417). &
W
WARNING
ARNING Risk of /re‑ and injury from
antif reeze
If antifreeze comes into contact with hot com-
ponent parts in the engine compartment, it
may ignite. #
Allow the engine tocool down before
yo uto p up the antifreeze. #
Make sure that no antifre eze spills out
next tothe /ller opening. #
Thoroughly clean the antifreeze from
component parts before starting the
ve hicle. *
N NOOTE
TE Damage caused byincor rect cool-
ant #
Only use coolant that has been premixed
with there qu ired antifreeze pr otection. 422
422
Te
ch nical data
Page 426 of 537

Information on coolant is
available at thefo l-
lowing locations:
R Inthe Mercedes-Benz Speci/cation for
Operating Fluids 320.1
- Athttps://be vo.mercedes-benz.com
- Inthe Mercedes-Benz BeVo App
R Ataqu ali/ed specialist workshop *
N NOOTE
TE Overheating at high outside temp er-
atures If an inappropriate coolant is used,
the engine
cooling system is not su1ciently pr otected
against overheating and cor rosion at high out-
side temp eratures. #
Only use coolant appr ovedby Mercedes-
Benz. #
Obser vethe inst ructions in the
Mercedes-Benz Speci/cations for Oper-
ating Fluids 320.1. Ha
ve the coolant regula rly re placed at a quali/ed
specialist workshop. Proportion of antif
reeze concentrate in the engine
cooling system:
R A minimum of 50% (antifreeze pr otection down
to about -37°C)
R A maximum of 55% (antifre eze protection
down to-45°C) N
No
ot
tes on windscr
es on windscr een w
een washer
asher 0uid
0uid Obser
vethe no tes on operating 0uids
(/ page 417). &
W
WARNING
ARNING ‑ Risk of /re and injury due to
windscreen washer concent rate
Wi ndsc reen washer concent rate is highly 0am-
mable. It could ignite if it comes into contact
with hot engine component parts or the
ex haust system. #
Make sure that no windscreen washer
concent rate spills out next tothe /ller
opening. *
N NOOTE
TE Damage totheex terior lighting due
to unsuitable windscreen washer 0uid Unsuitable windscreen
washer 0uids may
damage the plastic sur face of theex terior
lighting. #
Only use windscreen washer 0uids which
are also suitable for use on plastic sur fa-
ces, e.g. MB SummerFit or MB WinterFit. *
N
NOOTE
TE Bloc ked spr aynozzles caused by
mixing windscreen washer 0uids #
Do not mix MB SummerFit and MB Win-
te rFit with other windscreen washer 0u-
ids. Do not use distilled or de-ionised
water. Other-
wise, the /ll le vel sensor may be triggered er rone-
ous ly.
Re commended windscreen washer 0uid:
R abo vefreezing point: e.g. MB SummerFit
R below freezing point: e.g. MB WinterFit Te
ch nical data
423
423
Page 427 of 537

Fo
rth e cor rect mixing ratio, referto the informa-
tion on the antifreeze container.
Mix washer 0uid with windscreen washer 0uid all
ye ar round. V
V
ehicle data
ehicle data Inf
Inf
or
ormation r
mation r eg
egar
arding t
ding t he v
he vehicle data
ehicle data The
vehicle data speci/ed may vary as a result of
th efo llowing factors:
Fa ctors:
R tyres
R load
R condition of the suspension
R optional equipment
In addition, thefo llowing applies tothe speci/ed
ve hicle data:
R Items of optional equipment increase the unla-
den weight and reduce the pa yload.
R Vehicle-speci/c weight information can be
fo und on theve hicle identi/cation plate
(/ page 416). V
V
ehicle dimensions
ehicle dimensions V
V
ehicle dimensions
ehicle dimensions Mer
Mer
cedes-Ma
cedes-Ma ybac
ybach S 450
h S 450
Mer
Mer cedes-Ma
cedes-Ma ybac
ybach S 580
h S 580
Mer
Mer cedes-Ma
cedes-Ma ybac
ybach S 680
h S 680
Ve hicle lengt h5 469 mm
Ve hicle width including outside
mir rors 2109 mm
Ve hicle width excluding out-
side mir rors 1921 mm
Ve hicle height 1510 mm
Wheelbase 3396 mm W
W
eights and loads
eights and loads Missing
values werenot available at the time of
going topress. R
R
oof load
oof load Model
Model
Maximum r
Maximum roof load
oof load
Mercedes-Maybach S
450
Mercedes-Maybach S
580
Mercedes-Maybach S
680 424 424
Te
ch nical data
Page 428 of 537

Displa
Displa
y messag
y messag es
es Intr
Intr
oduction
oduction Inf
Inf
or
ormation about displa
mation about displa y messag
y messages
es
Display messages appear on the driver displa y.
Display messages with graphical symbols are sim-
pli/ed in the Owner's Manual and may di.er from
th e symbols on the driver displa y.The driver dis-
play sh ows high-priority display messages in red.
Cer tain display message s are accompanied by a
wa rning tone.
Please act in accordance with the display mes-
sages and follow the additional no tes in the Own-
er's Manual.
Fo r some display messages, symbols will also be
shown:
R Õ Further information
R ¨ Hide displ aymessage
Wi th th e leT-hand Touch Control, you can select
th ere specti vesymbol byswiping tothe leT or
ri ght. Pressing Õdispla ysfur ther information on
th e central displa y.Press the¨ symbol tohide
th e display message. Yo
u can hide lo w-priority display messages by
pressing the back button Gorthe leT-hand
To uch Control. The display message s willthen be
stored in the message memor y.
Re ctify the cause of a display message as quickly
as possible.
High-priority display message s cannotbe hidden.
The driver display will show these display mes-
sages continuously until the cause of the display
message has been recti/ed.
Calling up sav Calling up sav ed displa
ed display messag
y messag es
es
Driver's displa y:
4 Service
The Message memory: XX message appears in
th e driver's displa y. #
Scroll thro ugh the display messages byswip-
ing upwards or down wards on the leT-hand
To uch Control. #
T
To e
o e xit t
xit t he display
he display :
:press back button G. Display message
s andwarning/indicator lamps
425
425
Page 429 of 537

Occupant safe
Occupant safe
ty
ty Displa
Displa
y messag
y messag es P
es Possible causes/conseq
ossible causes/conseq uences and
uences andM
MSolutions
Solutions
6
Restraint system malfunc-
tion Consult workshop *T
herestraint system is malfunctioning (/ page 43). &
W WARNING
ARNING Risk of injury due tomalfunctions in there straint system
Co mp onents in there straint system ma y be activated unintentionally or not deploy as intended in an accident. #
Have there straint system checked and repaired immediately at a quali/ed specialist workshop. 6
Front left malfunction Con-
sult workshop (examp le) *T
he cor responding restraint system is malfunctioning (/ page 43). &
W WARNING
ARNING Risk of injury due tomalfunctions in there straint system
Co mp onents in there straint system ma y be activated unintentionally or not deploy as intended in an accident. #
Have there straint system checked and repaired immediately at a quali/ed specialist workshop. 6
Left windowbag malfunc-
tion Consult work-
shop (examp le) *T
he cor responding restraint system is malfunctioning (/ page 43). &
W WARNING
ARNING Risk of injury or fata l injury due toa malfunction in the windowbag
The windowbag might be triggered unintentionally or might not be triggered at all in theev ent of an accident. #
Have the windowbag checked and repaired immediately at a quali/ed specialist workshop. 426
426
Displ
aymessages and warning/indicator lamps
Page 430 of 537

Displa
Displa
y messag
y messag es P
es Possible causes/conseq
ossible causes/consequences and uences andM
MSolutions
Solutions
Push rear left seat belt
extender back manually
See Owner's Manual (exa m-
ple) *T
he cor responding seat belt extender is malfunctioning. #
Slide the seat belt extender back into its original position manual ly. #
Ifth e malfunction occurs again, consult a quali/ed specialist workshop.
Front passenger airbag dis-
abled See Owner's Manual *T
he front passen ger airbag has been disabled even though an adult or a person of adult build is on the front passenger
seat. If additional forc es are applied tothe seat, thewe ight the system de tects may be too lo w. &
W WARNI NG
ARNI NG‑ Risk of injury or evenfata l injury when the front passenger airbag is disabled
If th e front passenger airbag is disabled, It will not be deplo yed in theev ent of an accident and cannot per form its
intended pr otective function.
A person in the front passenger seat could then, forex ample, come into contact with theve hicle interior, especially
if th e person is sitting too close tothe dashboard. #
Beawa reofthe status of the front passenger airbag bo thbefore and during the journe y. #
Stop theve hicle immediately in accordance with the tra1c conditions. #
Make sure that no objects are trapped under the front passenger seat. #
Check the status of automatic front passenger airbag actuation (/ page 55).#
If necessar y,consult a quali/ed specialist workshop immediatel y. Display messages and
warning/indicator lamps
427
427
Page 431 of 537

Displa
Displa
y messag
y messag es P
es Possible causes/conseq
ossible causes/consequences and uences andM
MSolutions
Solutions
Front passenger airbag ena-
bled See Owner's Manual *T
he front passen ger airbag will be enabled while theve hicle is in motion in thefo llowing situations:
R even when a child, a small adult or an object weighing less than the system weight thre shold is located on the front
passenger seat
R even when the front passenger seat is not occupied
The system may de tect objects or forc es that are adding tothewe ight applied tothe seat. &
W WARNING
ARNING Risk of injury or death when using a child restraint system while the front passenger airbag is ena-
bled
If yo u secure a child in a child restraint system on the front passenger seat and the front passenger airbag is ena-
bled, the front passenger airbag can deploy in theev ent of an accident.
The child could be struck bythe airbag. #
Ensure, bo thbefore and during the journe y,that the status of the front passenger airbag is cor rect.
NEVER use a rear wa rdfacing child restraint on a seat pro tected byan ACTIVE AIRBAG in front of it, DEATH or
SERIOUS INJURY tothe CHILD can occur. #
Stop theve hicle immediately in accordance with the tra1c conditions. #
Make sure that no objects are trapped under the front passenger seat. #
Check the status of automatic front passenger airbag actuation (/ page 55).#
If necessar y,consult a quali/ed specialist workshop immediatel y.428
428
Display message
s andwarning/indicator lamps
Page 432 of 537
Displa
Displa
y messag
y messag es P
es Possible causes/conseq
ossible causes/consequences and uences andM
MSolutions
Solutions
PRE-SAFE inoperative See
Owner's Manual *
The PRE‑SAFE ®
functions are malfunctioning. #
Consult a quali/ed specialist workshop.
PRE-SAFE impulse side
inoperative See Owner's
Manual *
The PRE‑SAFE ®
Impulse Side system is malfunctioning or inoperative aTer having already been triggered. #
Consult a quali/ed specialist workshop. K K
e
ey
y Displa
Displa
y messag
y messag es P
es Possible causes/conseq
ossible causes/conseq uences and
uences andM
MSolutions
Solutions
Á
Replace key *H
aveth eke yre placed. #
Consult a quali/ed specialist workshop.
Á
Change key batteries *T
hekey battery is dischar ged. #
Replace the battery (/ page 86). Display messages and
warning/indicator lamps
429
429