2021 TOYOTA MIRAI Accessories, Audio & Navigation (in English)

123
4
4
Audio/visual system
Audio/visual system
4-1. Basic operationQuick reference........... 124
Some basics ............... 126
4-2. Radio operation
AM/FM/SiriusXM
® Satellite
Radio ......................... 131
4-3. Media operation USB memory............... 140
iPod/iPhone (Apple Car- Play) .......................... 142
Android Auto ............... 145
Bluetooth
® audio ......... 146
4-4. Audio/visual remote con- trols
Steering switches ........ 150
Rear seat audio controls .................................. 151
4-5. Setup Audio settings ............. 153
4-6. Tips for operating the audio/visual system
Operating information . 155

1244-1. Basic operation
4-1.Basic operation
The audio control screen can be reached by the following methods:
■From the “AUDIO” button
1 Press the “AUDIO” button.
■From the “MENU” button
1 Press the “MENU” button, then select “Audio”.
8-inch display model
12.3-inch display model
 Using the radio ( P.131)
 Playing a USB memory ( P.140)
Quick reference
Functional overview

1254-1. Basic operation
4
Audio/visual system
Playing an iPod/iPhone (Apple CarPlay) ( P.142)
 Using the Android Auto ( P.145)
 Playing a Bluetooth
® device ( P.146)
 Using the steering wheel audio switches ( P.150)
 Using the rear seat audio controls
* ( P.151)
 Audio system settings ( P.153)
*: If equipped
●12.3-inch display model: The audio functions can also be displa yed and
operated on the side display. ( P. 2 9 )

1264-1. Basic operation
8-inch display model
1 Press the “POWER VOL-
UME” knob to turn the
audio/visual system on and
off.
12.3-inch display model
1 Press the button to turn
the audio/visual system on
and off.
1 Press the “AUDIO” button.
8-inch display model
12.3-inch display model
2 Select “Source” or press
“AUDIO” button again.
Some basics
This section describes
some of the basic features
of the audio/visual system.
Some information may not
pertain to your system.
Your audio/visual system
works when the power
switch is in ACC or ON.
NOTICE
●To prevent the 12-volt battery
from being discharged, do not
leave the audio/visual system
on longer than necessary when
the fuel cell system is not oper-
ating.
Turning the system on
and off
Selecting an audio source

1274-1. Basic operation
4
Audio/visual system
3Select the desired source.
●Dimmed screen buttons cannot be
operated.
●When there are two pages, select
or to change the page.
●When an Apple CarPlay/Android
Auto connection is established,
some system functions, such as
the following, will be replaced by
similar Apple CarPlay/Android
Auto function or will become
unavailable:
• iPod (Audio Playback)
• USB audio/USB video
• Bluetooth
® audio
• Toyota apps
1 Display the audio source
selection screen. ( P.126)
2 Select “Reorder”.
3 Select the desired audio
source then or to reor-
der.
4 Select “OK”. 1
Connect a device to the USB
port.
 Turn on the power of the
device if it is not turned on.
●If a USB hub is plugged-in, two
devices can be connected at a
time.
●Even if a USB hub is used to con-
nect more than two USB devices,
only the first two connected
devices will be recognized.
●If a USB hub that has more than
two ports is connected to the USB
port, devices connected to the
USB hub may not charge or be
inoperable, as the supply of cur-
rent may be insufficient.
1 Display the audio control
screen. ( P.126)
2 Select “Sound”.
3 Select the desired item to be
set.
Reordering the audio
source
USB port
Sound settings

1284-1. Basic operation
Ty p e ASelect to set the tre-
ble/mid/bass. ( P.128)
Select to set the fader/bal-
ance. ( P.128)
Select to set the automatic
sound levelizer. ( P.129)
Ty p e B
Select to set the tre-
ble/mid/bass. ( P.128)
Select to set the fader/bal-
ance. ( P.128)
Select to set the automatic
sound levelizer. ( P.129)
Select to set the surround
on/off.
This function can create a
feeling of presence.
■Treble/Mid/Bass
How good an audio program sounds is largely determined by
the mix of the treble, mid and
bass levels. In fact, different
kinds of music and vocal pro-
grams usually sound better with
different mixes of treble, mid
and bass.
1
Select “Treble/Mid/Bass”.
2 Select the desired screen
button.
Select “+” or “-” to adjust
high-pitched tones.
Select “+” or “-” to adjust mid-
pitched tones.
Select “+” or “-” to adjust low-
pitched tones.
■Fader/Balance
A good balance of the left and
right stereo channels and of the
front and rear sound levels is
also important.
Keep in mind that when listening
to a stereo recording or broad-
cast, changing the right/left bal-
ance will increase the volume of
1 group of sounds while
decreasing the volume of
another.
1 Select “Fader/Balance”.
A
B
C
A
B
C
D
A
B
C

1294-1. Basic operation
4
Audio/visual system
2Select the desired screen
button.
Select to adjust the sound
balance between the front
and rear speakers.
Select to adjust the sound
balance between the left and
right speakers.
■Automatic sound levelizer
(ASL)
The system adjusts to the opti-
mum volume and tone quality
according to vehicle speed to
compensate for increased road
noise, wind noise, or other
noises while driving.
Ty p e A
1 Select “Automatic Sound
Levelizer”.
2 Select “High”, “Mid”, “Low” or
“Off”.
Ty p e B
1 Select “Automatic Sound
Levelizer”.
2 Select to set the automatic
sound levelizer on/off.
■Screen format settings
The screen format can be
selected for USB video.
1 Press the “MENU” button.
2 Select “Setup”.
3 Select “Audio”.
4 Select “Common”.
5 Select “Screen Format”.
6 Select the desired item to be
adjusted.
Select to display a 4:3
screen, with either side in
black.
Select to enlarge the image
horizontally and vertically to
full screen.
Select to enlarge the image
by the same ratio horizontally
and vertically.
■Contrast and brightness
adjustment
The contrast and brightness of
the screen can be adjusted.
1 Press the “MENU” button.
2 Select “Setup”.
A
B
Audio screen adjustment
A
B
C

1304-1. Basic operation
3Select “Audio”.
4 Select “Common”.
5 Select “Display”.
6 Select the desired item to be
adjusted.
 “Contrast”
“+”: Select to strengthen the con-
trast of the screen.
“-”: Select to weaken the contrast of
the screen.
“Brightness”
“+”: Select to brighten the screen.
“-”: Select to darken the screen.
●Depending on the audio source,
some functions may not be avail-
able.
1 Press this switch to operate
the voice command system.
 The voice command system
and its list of commands can
be operated. ( P.181)
Voice command system