Page 265 of 405
Driver assistance systems
Page 266 of 405
Driving
Lane line detected. The system does not
int erv
ene.
Switching the lane assist system on or off
In some countries, the Lane Assist System is
always activated when the ignition is switch-
ed on. The connection status is shown in the
Driver assistance menu of the Infotainment
system or the driver assistance systems menu
after pressing the corresponding button. The
Lane Assist system can be activated and de-
activated in these menus.
The Lane Assist system is ready to actively in-
tervene as of approximately 60 km/h (35
mph) and if it has detected the lane limits
(system status: active). The control lamp
Page 267 of 405

Driver assistance systems
distance from the vehicle in front that is
pr esel
ected by the driver and remain in
the preferred position within the lane.
Travel Assist uses the same sensors as Adap-
tive Cruise Control (ACC) and Lane Assist.
Therefore, carefully read the information
about the ACC ››› page 254
and the Lane
Assist ››› page 262
and take into account the
limitations of the systems and the indications
given in the information.
Speed range
Travel Assist adjusts at speeds between ap-
prox. 30 km/h (approx. 20 mph) and approx.
210 km/h (approx. 130 mph); in the case of
the adaptive lane guidance function, be-
tween 0 km/h (0 mph) and approx. 250 km/h
(approx. 155 mph). This range may vary de-
pending on the market.
Driving with Travel Assist
Travel Assist automatically controls the ac-
celerator pedal, the brakes and the steering.
In addition, Travel Assist may, within its limita-
tions, decelerate the vehicle until it stops be-
hind another that stops and automatically
starts again.
You can override assisted adjustment at all
times. How to know if the vehicle is fitted with
Tr
avel Assist
The vehicle is fitted with Travel Assist if the
multifunction steering wheel has the button
Page 268 of 405

Driving
Indications on the instrument panel
displ ay Fig. 191
On the instrument panel display: indi-
cation with activ e adjustment.Fig. 192
On the instrument panel display: con-
tr ol l
amps. Displays on the screen
› ›
› Fig. 191
The adaptive lane guidance function is
active.
1 Distance set.
In addition, depending on the equipment,
contr ol l
amps indicate the status of the sys-
tem on the instrument panel display:
››› Fig. 192
Travel Assist active, adaptive cruise con-
trol and adaptive lane guidance function
are active.
Travel Assist active, adaptive cruise con-
trol active and adaptive lane guidance
function passive.
Travel Assist active, adaptive cruise con-
trol passive and adaptive lane guidance
function active.
Travel Assist active, adaptive cruise con-
trol and adaptive lane guidance function
are passive.
Inactive Travel Assist.
Depending on the equipment, more details
may be displayed on the instrument cluster,
such as dashed lines or other vehicles on the
road. 2 A
B
C
D
E Operating Travel Assist
Fig. 193
Left side of the multifunction steering
wheel : butt
ons for operating Travel Assist. Connecting
Page 269 of 405