2020 Seat Tarraco Owner's manual

Towing bracket device*
correct figures for your specific model, which
may be l o
wer than these figures, are given in
the vehicle documentation. The information in
the vehicle documentation takes precedence
at all times.
To promote safety while driving, SEAT recom-
mends making the most of the maximum ver-
tical load technically permissible on the
coupling device ››› page 306
. An insufficient
vertical load has a negative influence on the
behaviour of both the vehicle and trailer.
The vertical load increases the weight on the
rear axle, reducing the vehicle's carrying ca-
pacity.
Gross combination weight of the towing
vehicle and trailer
The gross combination weight is the actual
weight of the loaded vehicle plus the actual
weight of the loaded trailer.
In some countries trailers are classified into
distinct categories. SEAT recommends ob-
taining information from a specialised work-
shop regarding which type of trailer is most
suitable for your vehicle.
Trailer loading
The weight of the towing vehicle and trailer
must be balanced. In order to do this, the
load must be as close as possible to the max-
imum vertical load technically permissible on
the coupling point, and it must be evenly dis- tributed between the back and front of the
trail
er:

Driving

Towing bracket device*
WARNING
The enhanced safety provided by the elec-
tric st abilit
y control of the vehicle and trail-
er should not lead you to take any risks that
could compromise your safety.

Driving
The control lamp

Towing bracket device*
Retrofitting a towing bracket Description Fig. 221
Limits and attachment points for ret-
r ofitting a t
owing bracket. SEAT recommends that towing brackets be
r
etr

ofitted at a specialised workshop. For ex- ample, it may very well be necessary to ad-
just the cooling system or mount thermal pr

o-
tection plates. SEAT recommends visiting a
SEAT dealership for this.
If a towing bracket is retrofitted, the distance
specifications should always be kept in mind.
The distance between the centre of the ball
head and the road ››› Fig. 221
D must never
be l ess than indicat

ed. This also applies when
the vehicle is fully loaded, including the tech-
nically permissible maximum vertical load on
the coupling device.
Distance specifications ››› Fig. 221
:
Mounting points on the vehicle
1,095 mm
75 mm (minimum)
365 mm
353 mm
600 mm
1,050 mm WARNING
If the cables are improperly or incorrectly
connect ed, this may l

ead to malfunctions
in the entire vehicle electronic system, as
well as to accidents and serious injuries.

Practical tips
Practical tips
High-v olt
age battery
Safety instructions Introduction  V
alid for: hybrid vehicles WARNING
The vehicle’s high-voltage network and the
high-v olt

age battery are hazardous and
can cause burns and other injuries, includ-
ing fatal electric shocks.

High-voltage battery

Practical tips
Incorrect handling of the high-voltage
batt ery can cause serious injuries or
death. Maint
enance work on the high-
voltage battery must only be performed
by specialized personnel with the corre-
sponding qualifications and training. Nev-
er modify the high-voltage battery. When
the high-voltage battery is open, ensure it
does not come into contact with water or
other liquids. Liquids may cause short cir-
cuits, electrical shocks and burns.
Conservation of the high-
volt
age battery
Conservation instructions  V
alid f
or: hybrid vehicles
Reliability and capacity of the high-volt-
age battery
Lithium ion batteries are subject to ageing
and wear and tear throughout their useful life
due to their physical and chemical charac-
teristics. Correct handling of the high-voltage
battery makes an essential contribution to
keeping it in a reliable state in the long term
and to achieving high battery capacity and
range. Therefore, it is extremely important to
respect the following conservation instruc-
tions for the high voltage battery. These 7 maintenance instructions are essential for
maint
aining the v

ehicle's value over time.
Please also observe the applicable SEAT
warranty conditions for the high-voltage bat-
tery.
Conservation instructions
SEAT recommends the following conserva-
tion instructions: