2020 Seat Tarraco Owner's manual

Instruments and warning/control lamps
Explanation of the function buttons Fig. 65
Schematic representation: Overview of the
possibl e function butt
ons on the screenTop part of the screen
Curr ent time
Driving pr

ofile and navigation informa-
tion. If the user has an active route, both
the time and the distance to the destina-
tion are displayed. If there is no active
route, the driving profile is displayed. On
vehicles with no available driving profile,
the current address is displayed whenev-
er there is no active route.
Air conditioning information. In vehicles
with heated steering wheels or wind-
screen heating, the corresponding icon is
A B
C displayed when these functions are ena-
bl
ed. If not, the curr
ent outside tempera-
ture is displayed.
Telephone information. Information re-
garding your mobile device is displayed:
available network signal strength, estab-
lished Bluetooth connection, unanswered
calls, new messages, battery status, etc.
Number of notifications and customi-
zation of the system depending on the
user and connectivity.
Bottom part of the screen Main menu display mode:
D E
F : main menu with the 6 main functions
divided int o 2 scr
eens (3 + 3, customisa-
ble by the user by pressing on the func-
tion).
: main menu in mosaic mode (all func- tions of the Infotainment system)
Direct accesses to the functions of the In-
fotainment system (up to 10 functions, 5 +
5, customisable by the user). By pressing
on the icon, you can select/deselect the
functions in question.
G
87

Operation
Initial configuration wizard Fig. 66
Schematic representation: Initial configu-
r ation wiz
ard The initial configuration wizard will help you
t
o set up your Inf

otainment system the first
time you switch it on.
Every time you switch on the Infotainment
system, the initial setup screen will be dis-
played ››› Fig. 66
if any parameters have not
been set (marked with “d”) or if the Don't
show again function button has not been
pressed. Function button: Function
 Closes the Configuration Wizard. Function button: Function
A Press to set day and time.
B Press to search and store to memory
the radio st

ations that have the best
reception at that moment.
C Press to go to the Online Media set-
tings.
D Press to link your mobile phone to
the Inf
ot

ainment system. Function button: Function
Don

Instruments and warning/control lamps
Vehicle information Fig. 67
Schematic representation: Vehicle infor-
mation and st at
us Pressing on 
! Selection
and then on

Vehicle info opens the Vehicle information
menu with the following submenus:
Driving data. The average consump-
tion, average speed, distance travelled,
trip duration and autonomy are shown. It
has 3 memories: “From departure”, “To-
tal calculation” and “From refuelling”
››› page 72.
Vehicle status. The warnings regarding
faults, incidents, memorisation of the
tyre pressure or information of the next
inspection service are displayed. –
–

89

Operation
Assist systems and vehicle settings Fig. 68
Schematic representation: Assist systems
and v ehicl
e settings The number of assist systems and settings
depend on the v
ersion and the country in
question.

v Driv

er assistance

v Automatic parking brake activation
››› page 275.

v Park assist ››› page 282
.

v Activate / deactivate ESC, stabilisation
systems and brake assist ››› page 278
.

v Activate / deactivate the Start-Stop sys-
tem ››› page 222
.

v Adaptive cruise control (ACC)
››› page 254.

v Lane Assist (lane keeping system)
››› page 262.
v
Emergency br ake assistance system
(Front Assist) ››› page 251
.

v Fatigue detection ››› page 74
.

v Traffic sign recognition ››› page 75
.

v Lane assist ››› page 268
.

v Emergency Assist ››› page 267
.90

Instruments and warning/control lamps
Multifunction steering
wheel* Functions Fig. 69
Controls on the steering wheel. Fig. 70
Controls on the steering wheel. The steering wheel includes multifunction
modul
es fr
om where it is possible to control
the audio, telephone, navigation, voice con- trol and assist functions without the driver
needing to be distr

acted from the road.
Buttons available depending on the version Symbol Function
1 Turn: T
urn volume up/down
Pr
ess: Mute volume
2 Turn: Search in the instrument panel
menu. In Navigation mode
, turn to in-
crease/decrease map size in SEAT
Digital Cockpit
Press: Select the highlighted option in
the instrument panel

 Radio: Sear
ch for the previous/next
st
ation.
Media: Short press: previous/next
track; long press: fast forward/rewind
 Activate phone menu (answer call,
end call)
 Switch between media and radio
sour
ces

 Change the instrument panel menu
(pre

vious/next)

Operation
Opening and closing Set of v ehicl
e keys
Vehicle key Fig. 71
Assignment of buttons on the remote
contr ol k

ey. Fig. 72
Vehicle key with alarm button. Key to the
››

› Fig. 71
,
››› Fig. 72 Unlock the vehicle
Lock the v

ehicle
Unlock only the rear lid. Press the button
until all the turn signals on the vehicle
flash briefly. You have 2 minutes to open
the rear lid. Once this time has passed, it
will lock again. In addition, the lamp on
the key flashes.
Folding the key shaft in and out
Alarm button*. Only press in the event of
an emergency! When the alarm button is
pressed, the vehicle's sounds and the turn
signals light up for a short time. Press
again to disconnect.
With the vehicle key the vehicle may be
locked or unlocked remotely ››› page 94
.
The vehicle key includes an emitter and bat-
tery. The receiver is in the interior of the vehi-
cle. The range of the vehicle key with remote
control and new battery is several metres
around the vehicle.
If it is not possible to open or close the vehicle
using the remote control key, this should be
re-synchronised ››› page 94
or the battery
changed ››› page 93
.
Different keys belonging to the vehicle may
be used. 1 2
3
4
5 Control lamp on the vehicle key
When a butt
on on the v
ehicle key is pressed,
the control lamp flashes ››› Fig. 71
(arrow)
once briefly, but if the button is held down for
a longer period the control lamp flashes sev-
eral times, such as in convenience opening.
If the vehicle key control lamp does not light
up when the button is pressed, replace the
key's battery ››› page 93
.
Spare key
To obtain a spare key and other vehicle keys,
the vehicle ID number is required.
Each new key contains a microchip which
must be coded with the data from the vehicle
electronic immobiliser. A vehicle key will not
work if it does not contain a microchip or the
microchip has not been encoded. This is also
true for keys which are specially cut for the
vehicle.
The vehicle keys or new spare keys can be
obtained from a SEAT Official Service, a spe-
cialised workshop or an approved key service
qualified to create this kind of key.
New keys or spare keys must be synchronised
before use ››› page 94
. WARNING

Opening and closing
may not be able to leave the vehicle or
manage on their o
wn.

Operation
Changing the battery