2020 Seat Tarraco Owner's manual

Instruments and warning/control lamps
Combined operating range display 
(hybrid v ehicl
es)
The value shown is calculated and updated
according to the driving style. Therefore, the
range can vary even when the fuel tank is full
and the high-voltage battery is fully charged.
Range can be increased by reducing or
switching off comfort consumers, e.g. air con-
ditioning or seat heating.
Speed warning for winter tyres
If the maximum speed set is exceeded, this is
displayed on the instrument panel
››› page 71.
The speed warning can be set in the Infotain-
ment system, by using the function button 
! SETTINGS ! Driver assistance
››› page 90.
Indications of the compass
Depending on the equipment, when the igni-
tion is on, the instrument panel display indi-
cates the direction in which you are driving
with a symbol, e.g. NW for Northwest.
When the Infotainment system is on and there
is no route guidance active, the graphic rep-
resentation of a compass is also shown.
Low consumption driving

Operation

v Tr
avel Assist On/Off ››› page 264

v Side Assist On/Off ››› page 268

v Navigation.

v Audio.

v Telephone.

v Vehicle status. ››› page 73
Service Menu In the Service menu various settings can be
adjust
ed depending on the f

eatures.
Open the Service menu
To open up the Service menu, select the
Range information profile while in the Driv-
ing data menu, and keep the  key press-
ed on the multifunction st eering wheel f

or ap-
proximately 4 seconds. When it is released,
the Service menu will be displayed. Now
you can browse through the menu using the
keys on the multifunction steering wheel as
usual.
Restart the service interval display
Select the Service menu and follow the in-
structions on the screen of the instrument
panel. Restart the oil service
Select the
Restore Oil service menu and
f

ollow the instructions on the instrument pan-
el display.
Restart journey data
Select the Reset trip menu and follow the
instructions on the instrument panel display
to reset the value.
Identifying letters on engine (LDM)
Select the menu Engine code . The identify-
ing letters of the engine will be shown on the
instrument cluster display at the bottom left.
Setting the clock
Select the Time menu and set the correct
time by turning the right thumbwheel of the
multifunction steering wheel.
Driving data indicator (multifunc-
tion display) The display of the travel data (multifunction
displ
ay) sho

ws different values about the
journey and the consumption. Change from one display to another

Instruments and warning/control lamps

Operation
eliminate the cause. If necessary, seek pro-
f essional assist
ance.
Priority 2 warning (yellow)
The symbol lights up or flashes (in part ac-
companied by audible warnings). Operating
faults or the lack of operating fluids can
cause damage to the vehicle or a fault.
Check the faulty function as soon as possible.
If necessary, seek professional assistance.
Information message
It provides information about processes in the
vehicle.
Driver alert system (break recom-
mendation)* Fig. 56
On the instrument panel display: driver
al ert syst

em symbol. The Fatigue detection informs the driver when
their driving behaviour sho
ws signs of f

atigue.
Function and operation
Fatigue detection determines the driving be-
haviour of the driver when starting a journey,
making a calculation of tiredness. This is con-
stantly compared with the current driving be-
haviour. If the system detects that the driver is
tired, an audible warning is given with a
sound and an optic warning is shown with a
symbol and complementary message on the
instrument panel display ››› Fig. 56
. The mes-
sage on the instrument panel display is
shown for approximately 5 seconds, and de-
pending on the case, is repeated. The system
stores the last message displayed.
The message on the instrument panel display
can be switched off by pressing the  button
on the multi-function steering wheel
››› page 82.
The message can be recalled to the instru-
ment panel display using the multifunction
display ››› page 72
.
Conditions of operation
Driving behaviour is only calculated on
speeds above about 65 km/h (40 mph) up to
around 200 km/h (125 mph). Switching on and off
Fatigue det
ection can be activated or deacti-
vated in the infotainment system using the
function button  > Driver assistance >
Driver Alert System ››› page 90
. A mark in-
dicates that the adjustment has been activa-
ted.
System limitations
The Fatigue detection has certain limitations
inherent to the system. The following condi-
tions can limit the Fatigue detection or pre-
vent it from functioning.

Instruments and warning/control lamps
speed the driving behaviour will be recalcula-
t ed. WARNING
Do not let the comfort afforded by the Fati-
gue det ection syst
em tempt you into taking
any risks when driving. Take regular breaks,
sufficient in length when making long jour-
neys.

Operation
Road sign detection system messages:
There are no traffic signs available

Instruments and warning/control lamps
country in question for driving with a trailer,
the syst em aut
omatically displays the usual
speed limits, e.g. in Germany 80 km/h
(50 mph).
If the speed warning for the trailer is deacti-
vated, the system displays the speed limits as
if there were no trailer hitched.
Limited operation
The traffic sign detection system has certain
limitations. The following cases may lead the
system to operate with limitations or not at
all:

Operation