2020 Seat Tarraco audio

About this manual
This manual describes the f eat
ures of the ve-
hicle at the time of drafting this text. Some of
the features described below will be intro-
duced in the future or will only be available in
certain markets.
Some of the features described here are
not included in all the types or variations
of the model and they can be varied or
modified based on technical or marketing
requirements without it being considered
misleading advertising.
Some details on the drawings may vary from
its vehicle and must be interpreted as a
standard representation.
The direction indicators (left, right, forwards,
backwards) in this manual refer to the travel
direction of the vehicle unless otherwise sta-
ted.
The audiovisual material is only meant to
help the users better understand some fea-
tures of the vehicle. It is not a replacement for
the instruction manual. Access the instruction
manual to see the complete information and
warnings.
The features marked with an asterisk
are included by default only in certain
versions of the model, supplied as op-
tional only for certain versions or only of-
fered in certain countries.
 Trademarks are mark
ed with ®. The ab-
sence of this symbol does not guarantee
that the term is not a trademark.
It indicates that the section continues on
the next page.
You can access the information in this manual
using:

Operation

v Tr
avel Assist On/Off ››› page 264

v Side Assist On/Off ››› page 268

v Navigation.

v Audio.

v Telephone.

v Vehicle status. ››› page 73
Service Menu In the Service menu various settings can be
adjust
ed depending on the f

eatures.
Open the Service menu
To open up the Service menu, select the
Range information profile while in the Driv-
ing data menu, and keep the  key press-
ed on the multifunction st eering wheel f

or ap-
proximately 4 seconds. When it is released,
the Service menu will be displayed. Now
you can browse through the menu using the
keys on the multifunction steering wheel as
usual.
Restart the service interval display
Select the Service menu and follow the in-
structions on the screen of the instrument
panel. Restart the oil service
Select the
Restore Oil service menu and
f

ollow the instructions on the instrument pan-
el display.
Restart journey data
Select the Reset trip menu and follow the
instructions on the instrument panel display
to reset the value.
Identifying letters on engine (LDM)
Select the menu Engine code . The identify-
ing letters of the engine will be shown on the
instrument cluster display at the bottom left.
Setting the clock
Select the Time menu and set the correct
time by turning the right thumbwheel of the
multifunction steering wheel.
Driving data indicator (multifunc-
tion display) The display of the travel data (multifunction
displ
ay) sho

ws different values about the
journey and the consumption. Change from one display to another

Instruments and warning/control lamps
Multifunction steering
wheel* Functions Fig. 69
Controls on the steering wheel. Fig. 70
Controls on the steering wheel. The steering wheel includes multifunction
modul
es fr
om where it is possible to control
the audio, telephone, navigation, voice con- trol and assist functions without the driver
needing to be distr

acted from the road.
Buttons available depending on the version Symbol Function
1 Turn: T
urn volume up/down
Pr
ess: Mute volume
2 Turn: Search in the instrument panel
menu. In Navigation mode
, turn to in-
crease/decrease map size in SEAT
Digital Cockpit
Press: Select the highlighted option in
the instrument panel

 Radio: Sear
ch for the previous/next
st
ation.
Media: Short press: previous/next
track; long press: fast forward/rewind
 Activate phone menu (answer call,
end call)
 Switch between media and radio
sour
ces

 Change the instrument panel menu
(pre

vious/next)

Infotainment system

v Touch oper
ation via the device screen, ro-
tary push-button, menu button and buttons
on the multifunction steering wheel.
Central computer with control and display
unit (9,2”) 1)
The factory-mounted central computer in the
vehicle includes country-specific compo-
nents and software for connectivity and for
the execution of vehicle, comfort and infotain-
ment functions.
The corresponding indications are shown on
the control and display unit screen and partly
on the instrument panel.

v Capacitive colour screen:

v Using the equipment with:

v Touch zones Touch operation.

v Buttons on the multifunction steering
wheel.

v Approach sensors (driver and passenger
side recognition, gesture control).
Vehicle and comfort functions
v Driver assistance system settings.

v Heating and air conditioning settings.

v Lights and visibility function settings.

v Vehicle comfort settings.

v Parking and manoeuvring settings. Sound system Basic equipment:
The inf
ot

ainment system that is supplied from
the factory is equipped as follows:

v Speakers in different locations and with dif-
ferent power levels (watts).

v Internal amplifier depending on the system:

v 8 speakers: 5 x 20 W

v Setting options:

v Equaliser, depending on the system:

v 8 speakers: 5 frequency bands or pre-
defined settings.

v Sound distribution, depending on the sys-
tem:

v8 speakers: Balance + Fader (left /
right / front / rear).

v Sound optimisation by zones (valid for 8
speaker system):

v Manual (Driver and All)

v Automatic depending on the seats oc-
cupied.
Optional sound system
The infotainment system can be extended
with an optional sound system as follows:
v 10 speakers in different locations and with
different power levels (watts).
v
Ext ernal amplifier (340 W Ethernet), which
pr

ocesses the audio signals sent by the
central computer.

v Excitation of speaker channels through
class AB final stages.

v Audio signal processing in digital internal
signal processor (DSP).

v Independent subwoofer in the luggage
compartment.

v Setting options:

v User equaliser: 5 bands.

v Sound distribution: Balance + Fader (left /
right / front / rear).

v Sound optimisation by zones:

vManual (Driver, Front and All)

v Subwoofer volume.
Connectivity Wi-Fi

v Wi-Fi conf orming t

o IEEE 802.11 b/g/n.

v Transfer in 2.4 GHz and 5 GHz.

v Three Wi-Fi modes at the same time:

v Tethering (2.4 GHz).

v 2.4 GHz access point.

v Connect System: 1)
Equipment name: Connect System.
180

Infotainment operation
Equipment features. Audio, multimedia
and connectivit y:

Driver assistance systems
ACC detects it and adapts the speed au-
t omatically, maint
aining a distance set by
the driver.
Does my vehicle have ACC?
Your vehicle has ACC if it has a configuration
menu in the infotainment system ››› page 90
and if it has the ACC function buttons on the
multifunction steering wheel ››› Fig. 185
.
Speed range
ACC regulates speeds between 30 km/h (20
mph) and 210 km/h (130 mph). 1)
If the vehicle is fitted with an automatic gear-
box, the ACC can bring the vehicle to a
standstill if a vehicle in front of it stops.
If your vehicle is fitted with a manual gearbox,
you must pay attention to speed and gear
changes. The ACC is deactivated if the
speed is too low (less than 30 km/h) of the
engine RPM is too low or high.
Driver intervention prompt ACC is subject to certain limitations in-
herent to the system. This means that
the driver will have to control the speed
and distance from other vehicles in cer-
tain situations. In this case, the instru-
 ment cluster display will tell you t
o in-
tervene by applying the brake, and an
audio warning will be played.
Radar sensors
The ACC uses the front radar technology.
Read its maintenance instructions and infor-
mation about its limitations ››› page 243
. WARNING
The ACC’s technology cannot overcome
the syst em's inher

ent limitations or change
the laws of physics. If used negligently or
involuntarily, it may cause serious acci-
dents and injuries. The system is not a re-
placement for driver awareness.

Help with parking and manoeuvring
Parking System Plus* Description Fig. 207
Parking aid view on the Infotainment
syst em displ
ay. Parking aid plus assists the driv
er by giving
visual and audio w
arnings about obstacles
detected in front of and behind the vehicle.
The bumpers are fitted with sensors. When an
obstacle is detected, it is indicated by audible
signals and in the Infotainment system
››› Fig. 207.
When moving close to an obstacle, it is possi-
ble to know if the obstacle is in front of the ve-
hicle or behind it by choosing different
sounds.
The approximate measurement range of the
sensors is:
1.20 m
A 1.60 m
0.90 m
As you appr oach the obst

acle, the frequency
of the audible signals will increase. The signal
will sound continuously at around 0.30 m:
Stop!
If the separation is maintained, the warning
volume is reduced after about 4 seconds.
In order to view the entire periphery of the ve-
hicle, the vehicle must be moved a few me-
tres forwards or backwards. Thus, the missing
areas are screened and obstacles at the
sides of the vehicle are displayed C .
Special f eat

ures of ParkPilot with Area
View
In the following situations the screened area
on the side of the vehicle is automatically hid-
den:

Help with parking and manoeuvring
A wake will indicate the anticipated forward
or backw ar
d trajectory, depending on the en-
gaged gear.
If an obstacle is located in the vehicle’s way,
the corresponding audible warning will
sound.
When the penultimate segment is displayed,
the vehicle has reached the collision zone. In
the collision zone, the obstacles are repre-
sented in red (including those out of the
path). Stop the vehicle! ››› in Introduction
on page 289, ››

› in Introduction on
page 290 !
In the e v
ent the car is equipped with the Top
View Camera system, Park Assist visual guid-
ance will appear in accordance with the view
selected in the Top View Camera system.
Setting the indications and audio
signals The audio indications and signals are set in
the inf
ot

ainment system ››› page 86
: Setup
Automatic activa-
tion On/off
Front volume* Volume in the front and rear
area.
R

ear volume* Volume in the rear area. Setup
Adjust volume When the parking aid is
s
wit

ched on, the volume of
the audio source will be re-
duced, depending on the se-
lected option.
Front sound set-
tings/sharpness* Sound tone in the front area.
Rear sound set-
tings/sharpness* Sound tone in the rear area. Error messages
If a an error or fault message appears on the
instrument clust
er in P

ark Assist, there is a
fault.
If the fault doesn't disappear before discon-
necting the ignition, it will not be indicated
next time the parking aid is connected.
If a rear sensor is faulty, only the obstacles in
area A are displayed
››

› Fig. 207
. If a front
sensor is faulty, only the obstacles in area B are displayed. Symbol