2017 INFINITI QX30 Owners Manual

WARNING
•Objects viewed in the outside mirror on the
passenger side are closer than they appear.
Be careful when moving to the right. Using
only this mirror could cause an accident.
Use the inside mirror or glance over your
shoulder to properly judge distances to
other objects.
•Do not adjust the mirrors while driving. You
could lose control of your vehicle and cause
an accident.
Folding
Manual type (if equipped):
Fold the outside rear-view mirror by pushing it
towards the rear of the vehicle.
Remote control type (if equipped)
:
The exterior rear view mirror remote control
operates when the ignition switch is in the ACC
or ON position.
Briefly press button
1. Both exterior mirrors
fold in or out.
Power folding outside mirrors (if so
equipped)
CAUTION
•Do not touch the mirrors while they are
moving. Your hand may be pinched, and the
mirror may malfunction.
•Do not drive with the mirrors stored. You
will be unable to see behind the vehicle.
The exterior rear-view mirrors automatically un-
fold when the ignition is switched on or when
the vehicle doors are unlocked. Use the [Fold
Mirrors in when Locking] option under the [CON-
VENIENCE] menu of the Vehicle Information
Display to specify that the mirrors are to beautomatically folded and unfolded. The Auto
fold feature can also be switched off. See
Switching the [Fold Mirrors in when Locking]
function on/offin the2. Instruments and
controlssection.
If the [Fold Mirrors in when Locking] option has
been activated in the Vehicle information dis-
play:
•The exterior mirrors fold in automatically as
soon as you lock the vehicle from the out-
side.
•The exterior mirrors fold out again automati-
cally as soon as you unlock the vehicle and
then open the driver’s or front-passenger
door.
Automatic parking positioner (if so
equipped)
The Parking position for the exterior mirror on
the front-passenger side function is only avail-
able if the vehicle is equipped with the Memory
package.
NIC2638
3-18Pre-driving checks and adjustments

1Button for the exterior mirror on the left
hand side.
2Button for the exterior mirror on the
right hand side.
3Adjustment button.
4Memory button M.
Setting and storing the parking position using
reverse gear
:
You can set the front-passenger side exterior
mirror so that you can see the rear wheel on
that side as soon as you engage reverse gear.
You can store this position.
1. Make sure that the vehicle is stationary.
2. Switch the ignition switch to the ON posi-
tion.
3. Press button
2for the external mirror on
the front-passenger side.4. Engage reverse gear. The exterior mirror on
the front-passenger side moves to the preset
parking position.
5. Use adjustment button
3to adjust the
exterior mirror. You should see the rear
wheel and the curb in the exterior mirror The
parking position is stored.
NOTE
•If you shift the transmission to another
position, the exterior mirror on the front
passenger side returns to the driving posi-
tion.
•If the driver’s side mirror is currently se-
lected, the passenger side mirror will not
move when reverse gear is engaged.
Setting and storing the parking position using
the memory button
:
You can set the front-passenger side exterior
mirror so that you can see the rear wheel on
that side as soon as you engage reverse gear.
This setting can be stored using memory button
M
4.
1. Make sure that the vehicle is stationary.
2. Switch the ignition switch to the ON posi-
tion.3. Press button
2for the external mirror on
the front-passenger side.
4. Engage reverse gear. The exterior mirror on
the front-passenger side moves to the preset
parking position.
5. Use adjustment button
3to adjust the
exterior mirror. You should see the rear
wheel and the curb in the exterior mirror.
6. Press memory button M
4and one of the
arrows on adjustment button
3within
three seconds. The parking position is
stored if the exterior mirror does not move.
7. If the mirror moves out of position, repeat
the steps.
Calling up a stored parking position
:
1. Switch the ignition switch to the ON posi-
tion.
2. Adjust the exterior mirror on the front
passenger side with the corresponding but-
ton.
3. Engage reverse gear. The exterior mirror on
the front-passenger side moves to the stored
parking position
NIC2639
Pre-driving checks and adjustments3-19

The exterior mirror on the front-passenger side
moves back to its original position:
•As soon as you exceed a speed of 15 km/h.
•About ten seconds after you have disen-
gaged reverse gear.
•If you press button1for the exterior mirror
on the driver’s side.
WARNING
•If you use the memory function on the driv-
er’s side while driving, the adjustments
could cause you to lose control of the ve-
hicle. There is a risk of an accident. Only use
the memory function on the driver’s side
while the vehicle is stationary.
Only use the memory function on the driv-
er’s side while the vehicle is stationary.
•If the memory function adjusts the seat, you
and other vehicle occupants-particularly
children-could become trapped. There is a
risk of injury.
While the memory function is making ad-
justments, make sure that no one has any
part of their body within the sweep of the
seat. If someone becomes trapped, immedi-ately release the memory function position
button The adjustment is stopped.
•If children activate the memory function,
they could become trapped, especially if
they are unattended. There is a risk of in-
jury.
When leaving the vehicle, always take the
key with you and lock the vehicle. Never
leave children unattended in the vehicle.
The memory function can be used at any time,
e.g. even when the key isn’t in the ignition lock.
STORING SETTINGS
With the memory function, you can store up to
three different settings.
•Seat and seatback position
•Driver’s side: position of the exterior mirrors
on the driver’s and front-passenger sides.
To store settings:
1. Adjust the seat (seePower seat
adjustmentin the1. Safety — seats, seat
belts and supplemental restraint system
section).
NIC2637
MEMORY FUNCTION (IF EQUIPPED)
3-20Pre-driving checks and adjustments

2. Adjust the exterior mirror on the driver’s
side (seeAdjustingin the3. Pre-driving
checks and adjustmentssection).
3. Briefly press the M memory button
1, and
then press preset position button 1, 2 or 3
2within three seconds.
The settings are stored in the selected pre-
set position. A tone sounds when the set-
tings have been completed.
CALLING UP A STORED SETTING
Press and hold the relevant preset position
button 1, 2 or 3 until the seat and exterior
mirrors are in the stored position.
NOTE
The setting procedure is interrupted as soon as
you release the storage position button.
Pre-driving checks and adjustments3-21

4 Display screen, heater and air conditioner,
and audio system
Safety precautions......................4-2
Center multi function control panel............4-2
INFINITI Controller.....................4-2
Steering wheel mounted controls...........4-3
USB connection ports..................4-3
Starting system......................4-4
Touch panel operation..................4-5
Operating menu screen.................4-7
Scrolling message or list................4-7
Selecting item.......................4-7
Adjusting volume and settings.............4-8
How to input letters and numbers...........4-8
How to operate display.................4-9
Menu button operation.................4-10
System status screen..................4-10
Items to be set initially.................4-11
Additional system information.............4-16
RearView monitor (if so equipped)............4-17
RearView Monitor system operation.........4-18
How to read the displayed lines...........4-18
Difference between predicted and actual
distances.........................4-19
How to park with predicted course lines......4-20
Adjusting the screen..................4-22
RearView Monitor setting...............4-23
RearView Monitor system limitations........4-23System maintenance..................4-24
Around View Monitor (if so equipped).........4-25
Around View Monitor system operation.......4-26
Difference between predicted and actual
distances.........................4-29
How to park with predicted course lines......4-30
How to switch the display...............4-32
Adjusting the screen..................4-32
Around View Monitor setting.............4-33
Around View
®Monitor system limitations.....4-34
System maintenance..................4-36
Sonar function settings (if so equipped)......4-37
Moving Object Detection (if so equipped).......4-38
MOD system operation.................4-39
MOD setting.......................4-40
MOD system limitations................4-40
MOD malfunction....................4-41
System maintenance..................4-41
Ventilators..........................4-42
Center ventilators....................4-42
Side ventilators.....................4-42
Rear ventilators (if equipped).............4-42
Heater and air conditioner.................4-43
Air conditioning system................4-44
Automatic climate control (2–zone).........4-48
Servicing air conditioner................4-52

Audio system(if equipped)................4-53
Audio operation precautions..............4-53
Names and functions of audio control buttons . .4-64
Main audio operation..................4-65
Radio...........................4-67
Compact Disc (CD) player................4-71
USB (Universal Serial Bus) connection port.....4-73
iPod player........................4-75
Bluetooth® streaming audio.............4-78
Audio settings......................4-82
Disc/USB memory device care and cleaning. . . .4-84
USB memory device...................4-84
Gracenote® End User License Agreement......4-85
Bluetooth® Hands-Free Phone System.........4-86
Regulatory information.................4-87
Phone...........................4-88
Connecting Bluetooth® device............4-91
Hands-free text messaging assistant........4-92
Phone and text message settings..........4-94
Bluetooth® information................4-98
INFINITI InTouch Apps overview..............4-99
Using Applications...................4-100
Vehicle Apps......................4-100Vehicle Apps Manager (if equipped)........4-102
Major Apps available for use in this system . . .4-103
Examples of how Vehicle Apps is used......4-104
Mobile Apps.......................4-104
Getting user ID and password............4-104
Notes on linking smartphone App to vehicle . . .4-105
Using smartphone applications...........4-105
INFINITI Voice Recognition system............4-105
Using Voice Recognition system...........4-105
Before starting.....................4-105
Giving voice commands................4-106
Voice recognition settings...............4-116
Information menu......................4-117
SiriusXM Travel Link®...............4-118
Settings menu.....................4-122
Troubleshooting guide...................4-124
Customer assistance..................4-124
System unit.......................4-125
Audio system......................4-126
Bluetooth® Hands-Free Phone System.......4-134
Monitor system.....................4-137
Voice recognition....................4-138

WARNING
•Do not adjust the heater and air conditioner
controls or audio controls while driving so
that full attention may be given to vehicle
operation.
•Do not use this system if you notice any
abnormality, such as a frozen screen or lack
of sound. Continued use of the system may
result in accident, fire or electric shock.
•If you noticed any foreign objects entering
the system hardware, spilled liquid on the
system, or noticed smoke or fumes coming
out from the system, or any other unusual
operation is observed, stop using the sys-
tem immediately. It is recommended that
you contact the nearest INFINITI retailer. Ig-
noring such conditions may lead to an acci-
dent, fire or electric shock.
•Do not disassemble or modify this system.
If you do, it may lead to an accident, fire, or
electric shock.
•Park the vehicle in a safe location and apply
the parking brake to view the images on the
front center display screen.
CAUTION
Do not use the system when the engine is not
running for extended periods of time to pre-
vent battery discharge.
INFINITI CONTROLLER
1

Push again to display the Display View Bar and
the display views.
Push and hold to hear the current guidance for
a programmed route.
<
>(models without navigation system).
Push to display the hands-free phone operation
screen.
When you receive a phone call, push this switch
to answer the call.
2