Page 65 of 81

63
e-mehari_en_Chap05_conseils-pratiques_ed02-2016
Coming out of hibernation mode
Do not connect the vehicle before step
5 and carry out each step in order.
1.
Po
sition the hibernation key in the switch.
Turn it to the left. 2. Ch
eck the message displayed: the screen
asks you to turn the key.
3.
Tu
rn the ignition key to the first position. The
vehicle wakes up.
4.
Sw
itch off and remove the ignition key. The
screen display is then as shown, 5.
Pl
ug in the charging cable.
Check for the rapid flashing of the green LED,
confirming that the battery is charging.
Leave your vehicle on charge for the period
displayed so that it is 100% operational. Never disconnect the charging cable
while the green LED is flashing rapidly
(a minimum of 4
h
ours).
You have to be in possession of the
charging cable and be able to connect
your vehicle to a power supply to
be able to wake the vehicle from
hibernation.
Wait a few seconds. The hazard warning lamps
flash several times and the boot locks and
unlocks.
5
Practical advice
Page 66 of 81

64
e-mehari_en_Chap05_conseils-pratiques_ed02-2016
Audio system
The audio unit
Your E-MEHARI is pre-wired to receive an
audio unit with ISO connectors.
The speakers
Your E-MEHARI is fitted with two speakers
for playing music and communicating with
CITRÖEN ASSISTANCE.
(1)
Au
dio unit housing (available as an
accessory)
(2)
Spea
ker position
Bluetooth system
A Bluetooth audio system is already installed in
your vehicle. The vehicle is handed over to you
with the remote control for the system, as well
as a remote control holder that you can fix to
the dashboard.
The system allows you to:
-
Pl
ay music on an audio player or
smartphone connected by Bluetooth, or a
USB peripheral device connected to the
port in the centre console (see page 47).
-
Ma
ke and receive telephone calls by
Bluetooth
c
onnection in hands-free mode,
using the microphone and speakers
installed in your E-MEHARI.
For more information on use, please refer to
the instructions for the Bluetooth system.
NB: iPod / iPhone connections by cable (Apple
dock) or auxiliary jack socket are not available.
Practical advice
Page 67 of 81
65
e-mehari_en_Chap06_caracteristiques-techniques_ed02-2016
Identification markings / Vehicle VIN
num
ber
A vehicle's VIN (Vehicle Identification Number) is a code allowing the identification of individual
vehicles.
The VIN can be found in three places on your E-MEHARI :
● The
c
entral
f
ront
c
rossmember
● The
r
ight-hand
f
ront
c
hassis
l
eg
● The
r
ear
c
rossmember
6
Technical data
Page 68 of 81
66
e-mehari_en_Chap06_caracteristiques-techniques_ed02-2016
Electric motor: Technical characteristics - LMP battery / Drive
train
Motor characteristics
Characteristics of the motor
in your E-MEHARI
Type of motor Permanent magnet
Maximum power 50
k
W
Nominal power
rating 35
k
W
The LMP® battery
This LMP® battery stores, for an equivalent we
ight, five times more energy than a
traditional battery and can be recharged in a
few hours.
The range of the vehicle has been type-
approved to European Regulation ECE 101R01.
The LMP
® battery is made only of non-polluting
materials.
At the end of its life, the LMP
® battery will be
collected and all of its components will be
recycled or reused.
Technical data
Page 69 of 81

67
e-mehari_en_Chap06_caracteristiques-techniques_ed02-2016
Characteristics (general, thermal and electric)
General characteristics
Volume (L) 300
Weight (kg) 300
Thermal characteristics
Internal
temperature 60°C / 80°C
Operating
temperature -20°C
/ +
60°CElectric characteristics
Energy 30
k
Wh
Nominal voltage 410 V
Peak power 45
k
W (30s)
Min / max LMP
®
battery voltage 300/435V
Capacity at C/4 75
A
h
Mass density 10 0
W
h/kg
Volume density 10 0
W
h/l
Maximum current 140
A
Y
our E-MEHARI contains a high voltage LMP
® battery isolated from its surroundings by a
unique pac
kaging arr
angement.
The LMP
® battery must only be handled by trained and qualified persons.
On-board charger
To make your E-MEHARI as versatile as
possible, it has its own internal charger.
Your E-MEHARI can be charged from any
power
p
oint;
t
he
c
harger
t
ransforms
t
he
s
upply
to s
uit the LMP
® battery
Characteristics of the charger in your
E
-MEHARI
Operating voltage 230
V
C
harger current
rating 16
A
C
harging power
rating 3
3
00
W
T
he charger in your E-MEHARI has the
following characteristics:
6
Technical data
Page 70 of 81
68
e-mehari_en_Chap06_caracteristiques-techniques_ed02-2016
Dimensions / Weights
Exterior dimensions
Dimensions of your E-MEHARI
Length 3.81
m
W
idth 1.87
m (
including the
m i r r o r s)
Height 1.6 5
m
Interior dimensions
Interior volumes of your E- MEHARI
Boot volume
200 litres / 800 litres with
the bench seat folded
Number of seats 4
Weights
Weights of your E-MEHARI
Unladen weight 1
4
05
k
g
Gross vehicle weight
(maximum laden weight)1 735 kg
Ke
rb weight 1
4
80
k
g
Exceeding the maximum weight
specified above risks damaging
your E-MEHARI and could cause an
accident and serious injuries.
The maximum weight must never be
exceeded.
Ty r e s
Tyres fitted to your E- MEHARI
Size 185/65
R
15
Ty p e "Latitude Cross" or
equivalent
Brand Michelin
Spare wheel No (temporary
puncture repair kit)
Tyre pressures Front 2
b
ar / Rear
2
b
ar
Technical data
Page 71 of 81

69
e-mehari_en_Chap06_caracteristiques-techniques_ed02-2016
Performance
Per formance of your E- MEHARI
Power 50
k
W
Maximum speed 68
m
ph (110
k
m/h)
(limited electronically)
Acceleration 0
–
5
0
k
m/h 6.4
se
conds
Range
The range of the vehicle has been type-
approved to European Regulation ECE 101R01.
In real use, several factors will vary the range
of
a
n
e
lectric
v
ehicle;
y
ou
h
ave
s
ome
c
ontrol
ove
r these and so can make noticeable
improvements in the range. These factors are:
● speed
a
nd
d
riving
s
tyle
● road
prof
ile
● temperature
set
tings
● tyres
● use
o
f
e
lectrical
a
ccessories
● vehicle
l
oading
Advice
● drive
a
t
c
onstant
s
peed
● adapt
y
our
d
riving
s
tyle
t
o
a
void
h
eavy
ene
rgy consumption
● make
u
se
o
f
e
nergy
r
ecovery:
a
nticipate
ea
rly the slowing of traffic by taking
your foot off the accelerator or braking
progressively
Speed and driving style
High speed reduces the range of the vehicle.
Sporty driving reduces the range of the vehicle:
adopt a smooth driving style.
Road profile
On a hill, rather than trying to maintain your
speed, do not depress the accelerator pedal
more than on level ground: rather, keep the
accelerator pedal in the same position.
Temperature setting
Using the heating or air conditioning reduces
the range of the vehicle.
Ty r e s
Low tyre pressures increase energy
consumption.
Observe the tyre pressures recommended for
your vehicle.
When replacing tyres, give preference to tyres
of the same brand, size, type and structure as
the original fitment.
Using tyres of different characteristics
significantly reduces the range of the vehicle.
Vehicle loading
Avoid carrying unnecessary loads in or on the
vehicle.
6
Technical data
Page 72 of 81
70
e-mehari_en_Chap06_caracteristiques-techniques_ed02-2016
Brakes and
suspension
Brakes and suspension on your E -MEHARI
Brakes Discs
Front / rear brake
disc diameter 257
m
m / 250
m
m
Front suspension MacPherson
Rear suspension Trailing arms with
stabilising bars
Braking assistance Electric braking
assistance
Braking system
Your E-MEHARI is fitted with two braking
system:
-
An e
nergy recovery braking system
-
A hy
draulic braking system
Energy recovery braking
system
The level of regeneration braking helping the
hydraulic braking depends on the state of
charge of the LMP
® battery.
If the state of charge of the LMP® battery is
100%, the energy recovery braking does not
intervene.
Hydraulic braking system
The hydraulic braking system is similar to that
used on conventional vehicles.
When driving on slippery sur faces, take
care when braking and accelerating.
Sudden braking could cause the wheels
to loose grip and lead to an accident
and serious injuries.
Technical data