2017 CITROEN E-MEHARI Handbook (in English)

47
e-mehari_en_Chap03_confort_ed02-2016
Interior fittings
General view
(1) Central storage.
(2) Passenger's storage.
(3) 12V accessory socket (cigarette lighter).
Sun visors
The sun visors fold for ward.
To protect you from dazzle from the front: lower
the sun visor.
12V socket
Remove the cap and use a suitable adaptor to
connect a 1
2V accessory (maximum power
120W) to the socket.
USB port for the audio
system and charging
electronic devices
This USB port (1) can be used to charge
certain electronic devices such as mobile
phones (however, not all are compatible) with a
maximum rating of 500mA.
The USB port is also compatible with the
vehicle's audio system (see page 64).
3
Your comfort

48
e-mehari_en_Chap03_confort_ed02-2016
Folding bench rear seat
Your E-MEHARI has been type-
approved for use on European roads
carrying up to 4 people: the driver and
three passengers.
You must never carry more than two
people on the bench rear seat.
Your E-MEHARI is fitted with two rear
seat belts.
Any additional passenger, who would
not be not restrained, would risk serious
or fatal injuries and also risk injuring
other occupants of the vehicle.Take care not to trap the seat belts and
position the seat belt buckles correctly
before folding the backrest. Never adjust the head restraints while
the vehicle is moving.
Your E-MEHARI has been type-approved as a
four-seat vehicle.
The bench rear seat is a folding bench seat for
two people.
Only the backrest is folding, the cushion
remains fixed in position.
Operation
Pull the controls (1)
on each side of the bench
seat to release the latches (2).
Fold the backrest (3) forward.
Adjusting the rear head
restraints
● To raise a head restraint: pull it up to the desi
red position.
● To
l

ower
a h
ead
r
estraint:
p
ush
i
t
d
own
t
o
th

e desired position.
Your comfort

49
e-mehari_en_Chap03_confort_ed02-2016
Rear side windows
Always remove the rear roof panel
before removing the side windows.
Remove the interior clips (1) , then remove the
released side window by pulling it up (2) .
Carry out the operation in reverse order to refit
the side window.
Rear screen
To remove the rear screen, detach the press
stud fasteners (1) then unzip the screen (2)
from right to left.
Always unzip the rear screen starting
from the right.
Carry out the operation in reverse order to refit
the screen. You can also remove the rear screen by
detaching the press stud fasteners (1)
then
unzipping it on each side (2) and clipping it at
the top using the straps provided (3) inside the
vehicle.
3
Your comfort

50
e-mehari_en_Chap03_confort_ed02-2016
Boot flap
When the flap is lowered, it can support
a maximum load of 100 kg. Precautions
Once raised, check that the boot flap is
closed and fully latched home so that it
cannot open on its own when the vehicle is
moving.
Always drive with the boot flap closed.
If objects carried extend beyond the boot
flap, you should never use the boot flap to
jam or retain them.
Opening the boot flap
The boot flap on your E-MEHARI is opened
by press the grip (1)
located in the central flap
recess.
Locking your E-MEHARI with your personal
RFID key ring does not affect the locking of the
boot flap.Closing the boot flap
● Raise the boot flap and guide it home.
● P ress l ightly o n t he o uter s ur face o f t he b oot fl

ap to close it.
Your comfort

51
e-mehari_en_Chap03_confort_ed02-2016
Fabric roof
Removing and refitting the
roof panels
The front and rear parts are removed and
refitted in the same way.
Removing a roof panel
Press with your hand on one of the four corners
of t he roof panel and remove the clip (1) .
Repeat the operation at the other three
corners. Detach the four press stud fasteners (2)
in turn
and roll the fabric as you go.
Repeat the procedure with the other panel if
you want to remove it.
Refitting a roof panel
Lay the panel out flat in position.
An arrow indicates the direction of the front of
the vehicle.
Attach the roof panel in a corner at the
tensioner and press firmly with your hand, as
when removing it, then engage the clip.
Repeat the operation at the other three
corners, finish by fixing the panel with the four
press stud fasteners from inside the vehicle.
Stowing a roof panel
The rolled-up roof panels can be stowed under
the boot floor hatch.
For opening the boot floor, see page 10.
Detaching and attaching the fabric roof
must only be done with the vehicle
stationary.
3
Your comfort

52
e-mehari_en_Chap03_confort_ed02-2016
Front windows
Slacken the interior door knobs (1), then
remove the released window by pulling it up (2) .
Tighten the knobs after removing the window. Reverse the operation to refit the window.
You can also raise the window by unzipping
each side (1)
and securing it at the top with the
straps provided (2) .
Your comfort

53
e-mehari_en_Chap04_entretien_ed02-2016
The drive train is powered directly
by the LMP® battery fitted to your
E-MEHARI.
Never try to do anything to the high
voltage components of your vehicle.
A mistake in handling these
components could cause an electric
shock and serious or fatal injuries.
The underbonnet of the vehicle is a
dangerous area that could cause serious
injuries.
Always keep children well away from
the underbonnet and never leave them
unsupervised.
Under the bonnet
Under the bonnet of your E-MEHARI can
be found the vehicle's drive train and the
reservoirs containing the fluid needed for the
correct operation of your E-MEHARI (brake
fluid, coolant and screenwash fluid).
Opening the bonnet
1. Releasing the bonnet: Pull the bonnet
release lever (1) located below and to the
left of the steering wheel, at the vehicles
left-hand front wheel arch.
Your E-MEHARI's bonnet is opened in two
steps:
The bonnet stay locates into the red cutout (3)
provided for this purpose.
When opening the bonnet, ensure that
it is always supported by the stay, so
as to avoid any injury resulting from the
bonnet dropping.
2.
Ti

p the bonnet safety catch (1)
. Raise and
secure the bonnet using the stay (2) .
4
Maintenance

54
e-mehari_en_Chap04_entretien_ed02-2016
If you notice when driving that the
bonnet is not closed correctly, slow
down and stop where it is safe to do so,
and then close the bonnet correctly.There are high voltage components
under the bonnet of your E-MEHARI.
We recommend that you should not
try to carry out the maintenance and
servicing of your vehicle yourself.
A mistake in handling these
components could cause an electric
shock and serious or fatal injuries.If work is needed on your vehicle,
contact a CITROËN
a

uthorised repairer
or
a qual

ified
pr
ofessional
wit
hout
de
lay.
Closing the bonnet
Disengage the stay while holding the bonnet
with one hand to avoid it suddenly dropping.
Return the stay to its original position and allow
the bonnet to drop and latch home.
Check that the bonnet has latched correctly.
Underbonnet layout
(1) Drive train
(2) Your E-MEHARI's heating system
(3) Motor coolant
(4) Brake fluid
(5) Screenwash fluid reservoir
(6) 12V battery
(7) Heating system fluid
Brake fluid and motor
coolant levels
Make a regular visual check of the brake fluid
and coolant levels.
These levels should be topped-up by a
CITROËN
a

uthorised
r
epairer
o
r
a q
ualified
pr

ofessional.
Maintenance