17
e-mehari_en_Chap01_faite-connaissance_ed02-2016
Failure to observe the instructions and
warnings related to the installation of
a child seat or child restraint system
would expose the child and the other
occupants of the vehicle to the risk of
serious injury in the event of a collision
or sudden braking.
Always use child seats that meet
the European standards and follow
scrupulously the installation and fixing
instructions provided with the child seat.
Before installing a child seat, check that
there is nothing that might inter fere with
its fixing to the two mounting points.
You will not be able to secure a child
seat to the two mounting points if they
are not clear of obstruction.A child restraint system in a vehicle
parked in the sun can become very hot.
Always check the sur face of the child
seat before placing the child in it, to
avoid any risk of injury.
The incorrect installation of a child seat
compromises the protection and safety
of the child and the occupants of the
vehicle in the event of a collision.
Installing a child seat
compatible with the ISOFIX
standard
(1) Horn.
(2 ) Lig hting / Direction indicator control stalk.
(3)
Wi
per / Screenwash / Pedestrian horn
control stalk.
(4)
In
strument panel.
(5)
Ai
r vents.
(6)
Ce
ntral storage / audio system (if fitted).
(7)
Hea
ting system.
(8)
Ce
ntre console: foglamp / door locking /
hazard warning / assistance call /
ventilation controls / City function
power steering / headlamp beam height
adjustment / 12V accessory socket.
(9)
Dr
ive selector / hibernation switch.
(10)
St
arting switch.
(11)
Pa
ssenger's storage.
(12)
RF
ID reader.
Instruments and controls
1
Get to know your E-MEHARI
22
e-mehari_en_Chap01_faite-connaissance_ed02-2016
Adjusting the headlamps
The headlamp beam height on your E-MEHARI
should be adjusted according to the load and
number of passengers in your vehicle, so as to
avoid causing a nuisance to other drivers.
Your E-MEHARI has a thumbwheel for
adjusting the height of the beams.
Visual indicators
Direction indicators
Before changing direction, always
signal your intention well in advance,
using the direction indicators.
Before changing direction, check the
vehicle's immediate surroundings using
the mirrors, taking account also of the
blind spots.
Poorly prepared changes of direction
can lead to collisions and accidents.
To operate the right-hand direction indicators:
push the left-hand control stalk behind the
wheel upward.
To operate the left-hand direction indicators:
pull the left-hand control stalk behind the wheel
downward.
The control stalk automatically returns to its
middle position once the change of direction
has been completed.
Select the desired position using headlamp
beam height adjustment control.
Use the "0" position when driving without heavy
loads.
Get to know your E-MEHARI
