9
e-mehari_en_Chap01_faite-connaissance_ed02-2016
Check that your key is at the STOP
position of the starting switch or
removed from the starting switch before
locking your E-MEHARI.
Precaution
Always remove the key from the starting
switch before locking your E-MEHARI.
Otherwise, your vehicle will remain unlocked
and the immobiliser not engaged.
● Locking:
pa
ss
yo
ur
pe
rsonal
RF
ID
ke
y
ri
ng
over t
he reader (the starting switch must be
off). Normally: flashes blue.
● Key
ri
ng
au
thorised:
fl
ashing
gr
een
+ warn
ing and driving rights.
● Key
ri
ng
no
t
au
thorised:
il
luminated
re
d.
● When
dr
iving,
th
e
LE
D
is of
f.
Anti-theft protection /
Electronic immobiliser
Your E-MEHARI is fitted with an electronic
immobiliser.
This immobiliser is directly linked to your
personal RFID key ring.
Only your personal RFID key ring gives
authorisation to use your E-MEHARI.
Problems related to your
personal RFID key ring
If you encounter problems using your
personal RFID key ring, contact CITRÖEN
ASSISTANCE
wi
thout delay.
Assistance call
Your E-MEHARI has an assistance call
button (1).
This button puts you in contact with an advisor
able to help you with procedures and how to
deal with situations and problems you might
encounter. This service is available 24
ho
urs a
day, 7
da
ys a week.
This assistance call button (1) is connected to
a hands-free telephone system, allowing you to
remain attentive while driving your vehicle.
1
Get to know your E-MEHARI
31
e-mehari_en_Chap01_faite-connaissance_ed02-2016
3. Push the charging nozzle (2) i nto the
charging socket until it clicks in place.
4.
Char
ging starts automatically. The
CHARGING indicator on the control unit
comes on to indicate that charging is in
progress.
Two signals indicate that the vehicle's battery
is charging:
-
Th
e right-hand rear lamp flashes 5
t
imes at
the start of the charge.
-
Th
e connection indicator (green plug) in the
display screen flashes continuously.
Stopping the charge
1. Press the unlocking button on the back of
t he charging nozzle then pull it out. The
charging nozzle disengages only if your
E-MEHARI has been unlocked using your
personal RFID key ring. 2. Re
fit the protective cover on the charging
nozzle.
3.
Di
sconnect the plug from the power point.
1
Get to know your E-MEHARI
