2017 CITROEN E-MEHARI Hibernation

17
e-mehari_en_Chap01_faite-connaissance_ed02-2016
Failure to observe the instructions and
warnings related to the installation of
a child seat or child restraint system
would expose the child and the other
occupants of the vehicle to the risk of
serious injury in the event of a collision
or sudden braking.
Always use child seats that meet
the European standards and follow
scrupulously the installation and fixing
instructions provided with the child seat.
Before installing a child seat, check that
there is nothing that might inter fere with
its fixing to the two mounting points.
You will not be able to secure a child
seat to the two mounting points if they
are not clear of obstruction.A child restraint system in a vehicle
parked in the sun can become very hot.
Always check the sur face of the child
seat before placing the child in it, to
avoid any risk of injury.
The incorrect installation of a child seat
compromises the protection and safety
of the child and the occupants of the
vehicle in the event of a collision.
Installing a child seat
compatible with the ISOFIX
standard
(1) Horn.
(2 ) Lig hting / Direction indicator control stalk.
(3)
Wi

per / Screenwash / Pedestrian horn
control stalk.
(4)
In

strument panel.
(5)
Ai

r vents.
(6)
Ce

ntral storage / audio system (if fitted).
(7)
Hea

ting system.
(8)
Ce

ntre console: foglamp / door locking /
hazard warning / assistance call /
ventilation controls / City function
power steering / headlamp beam height
adjustment / 12V accessory socket.
(9)
Dr

ive selector / hibernation switch.
(10)
St

arting switch.
(11)
Pa

ssenger's storage.
(12)
RF

ID reader.
Instruments and controls
1
Get to know your E-MEHARI

27
e-mehari_en_Chap01_faite-connaissance_ed02-2016
Your E-MEHARI is an electric vehicle
that uses direct current at high voltage.
Failing to observe the handling
instructions can cause serious or fatal
injuries.
Ensure that you read and follow the
charging procedures recommended by
CITROËN.
Charging your E-MEHARI
General points
To charge your E-MEHARI, you must use one
of the following:
● A
c
harging
c
able
i
ncluding
a C
CID
u
nit
w
ith
a do

mestic 230V power point and a YA Z AKI
connector.
● A
w

all
b
ox
t
ogether
w
ith
a c
harging
c
able
an

d a YA Z AKI connector.
● A
c

ompatible
p
ublic
c
harging
p
oint
a
nd
i
ts
YA

ZAKI charging cable.
Never use an extension lead.
1. YAZAKI charging nozzle.Charging the LMP® battery fitted
to E-MEHARI
It is recommended that the battery be charged
as often as possible.
With the charge indicator at 100%, if not
charged the LMP
® battery can discharge in
2 d
ays (without using the vehicle).
A hibernation mode is available to reduce
energy consumption from the battery to a
minimum.
In this way you can park your E-MEHARI,
not connected and with no consumption of
electrical energy, for several weeks or even
several months.
If the LMP
® battery is completely discharged,
the 1
2V b
attery c ould b e d amaged, r equiring i ts rep

lacement.
1
Get to know your E-MEHARI

62
e-mehari_en_Chap05_conseils-pratiques_ed02-2016
Going into hibernation
mode
Maximum hibernation period
according to the state of charge
of the battery
100%: 4 months
75% - 99%: 3 months
50% - 74%: 2 months
25% - 49%: 1 monthDo not put your E-MEHARI into
hibernation with a battery state of
charge of less than 25%.
Unlock your vehicle and disconnect the
charging plug.
Turn the ignition key to the first position, the
screen then displays:
Position the hibernation key in the switch
located below the drive selector, turn it to
the right and hold it in this position for a few
seconds.
The screen then displays: entry into hibernation
mode is confirmed.
Remove the hibernation key and the starter key.
The screen goes off after 30
s

econds.
Do not lock the vehicle.
Hibernation mode
Hibernation mode allows the consumption of
energy from the battery to be reduced to a
minimum.
In this way you can park your E-MEHARI,
not connected and with no consumption of
electrical energy, for several weeks or even
several months.
Coming out of hibernation mode takes 4
h

ours
and is followed by the charging time (a
maximum of between 8
a

nd 13
h
ours).
Practical advice

63
e-mehari_en_Chap05_conseils-pratiques_ed02-2016
Coming out of hibernation mode
Do not connect the vehicle before step
5 and carry out each step in order.
1.
Po

sition the hibernation key in the switch.
Turn it to the left. 2. Ch
eck the message displayed: the screen
asks you to turn the key.
3.
Tu

rn the ignition key to the first position. The
vehicle wakes up.
4.
Sw

itch off and remove the ignition key. The
screen display is then as shown, 5.
Pl

ug in the charging cable.
Check for the rapid flashing of the green LED,
confirming that the battery is charging.
Leave your vehicle on charge for the period
displayed so that it is 100% operational. Never disconnect the charging cable
while the green LED is flashing rapidly
(a minimum of 4
h

ours).
You have to be in possession of the
charging cable and be able to connect
your vehicle to a power supply to
be able to wake the vehicle from
hibernation.
Wait a few seconds. The hazard warning lamps
flash several times and the boot locks and
unlocks.
5
Practical advice