2017 CHRYSLER PACIFICA Owners Manual

Turn Signals......................... .254, 542
UCI Connector .......................... .743
Uconnect Customer Programmable Features ......36, 712, 737
Uconnect Settings .................36, 712, 737
Uconnect Access Vehicle Health Alert .....................786
Yelp................................ .790
Uconnect Settings Customer Programmable Features ...........734
Passive Entry Programming ................734
Uconnect Settings ...................... .734
Uconnect Voice Command ...................772
Umbrella Holder ......................... .187
Uniform Tire Quality Grades .................664
Universal Consumer Interface (UCI) Connector . . . .743
Universal Transmitter ..................... .175
Unleaded Gasoline ....................... .677Untwisting Procedure, Seat Belt
...............311
Vacuum ............................... .169
StownVAC .......................... .169
Vanity Mirrors ....................... .109, 192
Vehicle Identification Number (VIN) ............675
Vehicle Loading ...................... .504, 645
Vehicle Modifications/Alterations ...............6
Vehicle Storage .......................... .147
Viscosity, Engine Oil ...................... .623
Voice Recognition System (VR) ................772
Warning Flasher, Hazard ....................529
Warnings And Cautions ......................6
Warranty Information ..................... .802
Washers, Windshield ...................... .619
Washing Vehicle ......................... .669
Water Driving Through ....................... .524
12
INDEX 823

Wheel And Wheel Trim.....................668
Wheel And Wheel Trim Care .................668
Wind Buffeting .......................... .155
Window Fogging ........................ .147
Windshield Defroster ...................129, 376
Windshield Washers ....................120, 619
Fluid ............................... .619
Windshield Wiper Blades ....................627
Wiper Blade Replacement ...................627
Wipers, Intermittent ....................120, 121
Wrecker Towing ......................... .605
824 INDEX

INSTALLATION OF RADIO TRANSMITTING
EQUIPMENT
Special design considerations are incorporated into this
vehicle’s electronic system to provide immunity to radio
frequency signals. Mobile two-way radios and telephone
equipment must be installed properly by trained person-
nel. The following must be observed during installation.
The positive power connection should be made directly
to the battery and fused as close to the battery as possible.
The negative power connection should be made to body
sheet metal adjacent to the negative battery connection.
This connection should not be fused.
Antennas for two-way radios should be mounted on the
roof or the rear area of the vehicle. Care should be used
in mounting antennas with magnet bases. Magnets may
affect the accuracy or operation of the compass on
vehicles so equipped.The antenna cable should be as short as practical and
routed away from the vehicle wiring when possible. Use
only fully shielded coaxial cable.
Carefully match the antenna and cable to the radio to
ensure a low Standing Wave Ratio (SWR).
Mobile radio equipment with output power greater than
normal may require special precautions.
All installations should be checked for possible interfer-
ence between the communications equipment and the
vehicle’s electronic systems.

First Edition
Printed in U.S.A.
STICK WITH THE SPECIALISTS®
17RU-126-AA
©2015 FCA US LLC. All Rights Reserved.
Chrysler is a registered trademark of FCA US LLC.