2014 MITSUBISHI OUTLANDER SPORT Track

Listen to Audio Files on a USB Device8-30 For pleasant driving
8
4. Press the /SEL key.Repeat steps 1 to 4, and search for tracks.Select the track, and press the /SELkey to play.
E00736501102
By connecting commercially-available USBdevices such as USB memory to this product,
you can play back audio files on thesethrough the product.
NOTE
zWhile the category (1st level) is selected,press the 6 key to
cancel track search
mode.zIf there is no operation for 10 seconds afterselecting the category, then track searchmode will be cancelled.zSelect the category, and hold down the
/SEL key to start playback from the first
track in that category.zWhile the track is selected, press the 6key to return to the previous operation.zWhile the track is selected, hold down the6 key to cancel track search mode.zIf there is no operation for five seconds afterselecting the track, that
file is played back.
ziPod operations such as selecting a track willcancel track search mode.
Listen to Audio Files on a USB Device
CAUTIONzDo not leave the USB device unattended inthe vehicle.zNever hold these devices in your hand tooperate while driving,
as this is dangerous.
zDo not use hard discs, card readers, or mem-ory readers, as damage may occur to these orto the data contained therein. If these areerroneously connected, then put the opera-tion mode of the power switch in OFF, thenremove.zBecause of the risk of data loss, it is recom-mended that files be backed up.zNo guarantee is made as regards damage tothe USB device, nor regarding loss or dam-age to data contained therein.zDepending on how the devices are handled,audio files being damaged or lost, thereforeit is recommended that data be backed up.NOTE
zRegarding details such
as types of USB
devices that can be connected, and USBinput ports, refer to “Device types” on page8-63.zRegarding details of types of files that can beplayed back in equipment by type, refer to“File specifications” on page 8-64.
zRegarding how to c
onnect USB devices,
refer to “How to connect a USB memorydevice” on page 8-61.zWhen connecting a USB device, use a con-nection cable. Failure to use a connectioncable when connecting may place undue loadon, or damage the USB connector.zSet up the device in order that no unsafeactions, such as plugging in the connectioncable are taken while driving.zWhen inserting and removing the USBdevice, for safety’s sa
ke first stop the vehi-
cle.zDo not insert other th
an audio devices into
the USB port. Damage to the device orequipment may result.zDepending on the status of the USB device,it may take some time until the device is rec-ognized, or playback starts.zDepending on the USB device, the buttonfunctions on the product may not operatewhile the USB device is connected.zUSB device specifications and settings maymean that connection is not possible, orresult in differences in operation or display.zDepending on audio data
in the USB device,
track information may not be displayed cor-rectly.zDepending on the status of the vehicle anddevice, the iPod/iPhone may not play backafter starting the Plug-in Hybrid EV system.zData containing copyri
ght information may
not play back.NOTE
BK0203201EN.book 30 ページ ２０１３年１１月１９日　火曜日　午前１１時５０分

Listen to Audio Files on a USB Device
For pleasant driving 8-31
8
Press the MEDIA key to setUSB as the source. The selected source isindicated on the display.Press the key or key to select thetrack.This enables selection of the next or previoustrack.
Hold down the 3 key or the 4 key.Fast forward/rewind is possible.Repeat playback, random playback, and scanplayback are possible.Press the 1RPT key.Repeat playback of the track currently beingplayed.Hold down the 1RPT key.Repeat playback of the tracks within thefolder currently being played.
Press the 2RDM key.Play tracks in the folder currently beingplayed in a random order.Hold down the 2RDM key.Play the tracks in all folders in a randomorder.
zThis product can play back MP3, WMA, andAAC format audio files.zDepending on the type of USB device, usagemay not be possible, or
functions that can be
used may be restricted.zThe recommended file system for USBmemory is FAT32.zThe maximum supported capacity for USBmemory is 32GB.zOperate the USB device containing recordedaudio files while connected to this product.
Play Back of Audio Files on a USB Device Select the Track (File)
NOTE
Fast Forward or Rewind Switch Playback Mode Repeat Playback (RPT)
NOTE
zPressing again will cancel.zSelecting a file will cancel this.
Folder Repeat Playback
NOTE
zPressing again will cancel.zEven if the file is
selected, folder repeat
playback will not be cancelled.
Folder Random Playback (RDM)
NOTE
zPressing again will cancel.zEven if the file is selected, folder randomplayback will not be cancelled.
All Folder Random Playback
NOTE
zPressing again will cancel.zEven if the file is selected, all folder randomplayback will not be cancelled.
BK0203201EN.book 31 ページ ２０１３年１１月１９日　火曜日　午前１１時５０分

Listen to Bluetooth Audio8-32 For pleasant driving
8
Press the SCAN key. Play the first 10 secondsof each of the tracks on the whole USBdevice in order.Hold down the SCAN key.Play the first 10 seconds of the first track ineach folder on the USB device in order.Search folders and files, and select a track.1. Turn the /SEL key to select the folder.
2. Press the /SEL key.Files within the selected folder are dis-played.3. Turn the /SEL key to select the file.4. Press the /SEL key.This plays the selected file (track).
E00736701104
This product can play back tracks on com-mercially-available Bluetooth-capable audiodevices.
Scan Playback (SCAN)
NOTE
zPress this button again during playback ifyou wish to hear that track, and that trackwill play normally.
Folder Scan Playback
NOTE
zPress this button again during playback ifyou wish to hear that track, and that trackwill play normally.
Search Tracks
NOTE
zWhile the folder is selected, press the 6key to cancel track search mode.zIf there is no operation for 10 seconds afterselecting the folder, th
en track search mode
will be cancelled.zSelect the folder, and hold down the /SELkey to start playback from the first track inthat folder.zWhile the file is selected, press the 6 keyto return to the previous operation.zWhile the file is selected, hold down the6 key to cancel track search mode.zIf there is no operation for five seconds afterselecting the file, that file is played back.zOperations such as selecting a track will can-cel track search mode.
Listen to Bluetooth Audio
CAUTIONzNever hold these devices in your hand tooperate while driving, as this is dangerous.zDo not leave the Bl
uetooth audio device
unattended in the vehicle.zDepending on how the devices are handled,audio files being damaged or lost, thereforeit is recommended that data be backed up.NOTE
zDepending on the type
of Bluetooth-capable
audio devices, usage ma
y not be possible, or
functions that can be us
ed may be restricted.
zConfirm together with
the user manuals for
the commercially-available Bluetooth-capa-ble audio devices.zDepending on the type
of Bluetooth-capable
audio devices, volume levels may differ.There is the danger of loud volumes, so priorto use, it is recommended that you turn thevolume down.m “Adjust Volume” (P.8-22)
zDepending on the status
of the Bluetooth
audio device, it may take some time until thedevice is recognized, or playback starts.
BK0203201EN.book 32 ページ ２０１３年１１月１９日　火曜日　午前１１時５０分

Listen to Bluetooth AudioFor pleasant driving 8-33
8
Regarding how to connect your Bluetoothdevice, refer to “Connecting the Bluetooth
®
2.0 interface and Bluetooth device” on page8-47.Operation methods below describe situationsonce connection has been completed.
1. Press the MEDIA key to set BluetoothAudio as the source.The selected source is indicated on thedisplay.2. Press the 5 key. Bluetooth Audio play-back starts.
Press the key or key to select thetrack.This enables selection of the next or previoustrack.Hold down the 3 key or the 4 key.Fast forward/rewind is possible.
Repeat playback, random playback, and scanplayback are possible.Press the 1RPT key.Repeat playback of the track currently beingplayed.Press the 2RDM key.Play the tracks in the Bluetooth Audio devicein a random order.
zBluetooth audio device specifications andsettings may mean that connection is notpossible, or result in differences in operationor display.zDepending on audio data
in the Bluetooth
audio device, track information may not bedisplayed correctly.zDepending on the status of the vehicle anddevice, the iPod/iPhone may not play backafter starting the Plug-in
Hybrid EV system.
Connect a Bluetooth-capable Audio Device
NOTE
zIf the iPod/iPhone
is connected via Bluetooth
as a Bluetooth-capable audio device, then donot connect the iPod
/iPhone using an iPod
cable. Connection using both methods willresult in erroneous operation.NOTE
Play Bluetooth Audio
NOTE
zHold down the 5 key to pause.zPress the 6 key to stop.
Select the Track (File) Fast Forward or Rewind
Switch Playback Mode Repeat Playback (RPT)
NOTE
zEach time the 1RPT key is pressed, thisswitches in the order Repeat OFF, 1 trackrepeat, All track repeat, and Repeat OFF.
Random Playback (RDM)
NOTE
zPressing again will cancel.
BK0203201EN.book 33 ページ ２０１３年１１月１９日　火曜日　午前１１時５０分

To listen to a disc in the rear-seat
display (vehicles with rear-seat display)
8-34 For pleasant driving
8
Press the SCAN key.Play the first 10 seconds of each of the trackson the whole Bluetooth Audio device inorder.
E00755100168
It is possible to listen to the audio from therear-seat display using the vehicle’s speakers.Hold down the MEDIA key.Switch to the AUX mode, and “AUX” is dis-played.
E00738100033
This explains content of the display indicator.Scan Playback (SCAN)
NOTE
zPress this button again during playback ifyou wish to hear that track, and that trackwill play normally.
To l i s t e n t o a d i s c i n t h e rear-seat display (vehicles with rear-seat display)
NOTE
zFor more details about the rear-seat display,refer to the separate owner’s manual.
Display Indicator BK0203201EN.book 34 ページ ２０１３年１１月１９日　火曜日　午前１１時５０分

Audio Quality and Volume Balance Adjustment
For pleasant driving 8-35
8
E00738501076
Yo u c a n c h a n g e t h e c o n t e n t o f t h e d i s p l a yindicator.Press the DISP key to switch the display con-tent.Each time the DISP key is pressed, the dis-play content changes.This switches in the order “Disc title”, “Tracktitle”, and “Operating status”.
This switches in the order “Folder title”, “Filetitle”, and “Operating status”.Hold down the DISP key.This switches the ID3tag display.[DISP] Each time the key is pressed, thisswitches in the order “Album name”, “Trackname”, “Artist name”, “Genre name”
*, and
“Operating status”.
E00738901038
This switches in the order “Albums”, “Trackname”, “Artist name”, “Genre name”
*, and
“Operating status”.
E00739001023
Operating details are the same as in “DuringiPod Playback” (P.8-35).
E00738200021
Change audio quality settings.
Change the Display Mode
CAUTIONzThe operation of changing display contentsmay impede safe driving, therefore checksafety before operation.NOTE
zUp to 11 characters may be displayed at onetime. To display 12 or
more characters, press
the PAGE key, and subsequent characterswill be displayed.
During CD-DA playback
NOTE
zIf there is no text information to display, then“NO TITLE” is displayed.
During MP3/WMA/AAC Play-back
NOTE
zIf there is no text information to display, then“NO TITLE” is displayed.
Display the ID3tag *:Displayed when playing back audio fileson a USB device.
NOTE
zDuring display of the ID3tag, hold down theDISP key to switch to the folder title display.zThe genre name displa
y may not be possible.
During iPod Playback
NOTE
zIf there is no text information to display, then“NO TITLE” is displayed.zDisplayed genre name in equipment by type.zThe genre name display may not be possible.
During Bluetooth
® 2.0 Audio Play-
back Audio Quality and Volume Balance Adjustment
BK0203201EN.book 35 ページ ２０１３年１１月１９日　火曜日　午前１１時５０分

Troubleshooting
For pleasant driving 8-39
8
Here is a list of symptoms, causes and responses
if you think something is not working properly.
USB FILE ERROR Files that cannot be played are selected.
Select files that can be played.m “Audio Files (MP3/WMA/AAC)” (P.8-17)
USB BUS PWR There is high or low electrical current or voltage. Turn the power OFF and wait a short while. If the
problem persists, consult a MITSUBISHI MOTORS Authorised Service Point.
LSI ERROR There is an internal malfunction for some reason.UNSUPPORTED
FORMAT
Unsupported audio files have been played. Confirm audio files that can be played.
m “Audio Files (MP3/WMA/AAC)” (P.8-17)
UNSUPPORTED
DEVICE
An unsupported USB device has been connected. Please connect a USB memory device.
iPod NO SONG An iPod/iPhone not containing any tracks has been
connected.
Connect an iPod/iPhone containing tracks.
VER ERROR This iPod/iPhone software version is not supported. Please change to a supported software version.
Other ERROR DC An abnormal direct voltage has been sent to the
speakers.
Turn the power OFF and wait a short while. If the problem persists, consult a MITSUBISHI MOTORS Authorised Service Point.
If You Think Something Is Not Working Properly...
Symptoms
Cause
Response
There is no sound or quiet sound.
The volume is turned to its minimum. Adjust the volume.
m “Adjust Volume” (P.8-22)
The balance or fader is turned to one side. Adjust the balance or fader.
m “Adjust Audio Quality and Volume Balance” (P.8-35)
Mode
Message
Cause
Response
BK0203201EN.book 39 ページ ２０１３年１１月１９日　火曜日　午前１１時５０分

Vehicle dimensions12-4 Specifications
12
E01100203956
Ve h i c l e d i m e n s i o n s 1
Front track
1,540 mm
2
Overall width
1,810 mm
3
Front overhang
955 mm
4
Wheel base
2,670 mm
5
Rear overhang
1,030 mm
6
Overall length
4,655 mm
7
Ground clearance (unladen)
190 mm
8
Overall height (unladen)
Without roof rails
1,680 mm
With roof rails
9
Rear track
1,540 mm
BK0203201EN.book 4 ページ ２０１３年１１月１９日　火曜日　午前１１時５０分