Folding th
erears eat backres tback X
Mov ethe driver' sorfront-pa ssenger seat
forward if necessary.
! Mak esure that th eseat belt does not
become trapped when foldin gthe rear seat
backres tback .Otherwise, it could be
damaged.
X Swing backrest 001Aback.
X Adjust the backrest to the desired angle by
pulling the loop (Y page 256).
X Adjust the head restraints if necessary
(Y page 96).
X Move the driver's or front-passenge rseat
back if necessary.
Notes on using the cargo compartment Load position Making the best use of your cargo
compartment:
R
Load capacity is increased when
backrest 001Ais set to the load position (90°)
(Y page 256).
R Vehicles with aheight-adjustable trunk
floor: alevel load surface can be obtained
by movin gthe trun kfloor to the upper
position (Y page 260).
R Al arge rload area can be obtained by
moving the rear bench seat as far forward
as possible (Y page 257).
R The load area can be lengthened by folding
forward the folding backrest of the front-
passenger seat (Y page 253) and the
corresponding backrest in the rear.
Adjusting the angle of the rear seat
backrests
You can set the angle of the seat backrests
to one of 13 detent positions. X
Pull right or left release loop 0010forwards in
the direction of the arrow.
Corresponding seat backrest 001Ais
released.
X Pull backrest 001Aforward in the direction of
the arrow, or push it back and let it engage.
X To ensure that the backrest has engaged,
lean firmly against backrest 001A.
i The angle and fore/aft position of the left
and right rear seats can be separately
adjusted for each seat in order to make
better use of the cargo compartment. 256
Stowage areasStowage and features
monitor cannot function reliably. Only
restart the tire pressure loss warning
system/the tire pressure monitor when the
damaged whee lhas been replaced with a
new wheel.
Vehicles with tire pressure monitor:
after mounting an emergency spare wheel,
the system may still display the tire
pressure of the removed whee lfor afew
minutes. The value displayed for the
mounted emergenc yspare wheel is not the
same as the current tire pressure of the
emergenc yspare wheel.
An emergenc yspare wheel may also be
mounted against the direction of rotation.
Observe the time restriction on use as well as
the speed limitation specified on the
emergenc yspare wheel.
Replace the tires after six years at the latest,
regardless of wear. This also applies to the
emergenc yspare wheel. Removing the emergency sparew
heelVehicles with the "Minispare" emergenc
yspare
wheel:
The "Minispare" emergenc yspare wheel is
secured in emergenc yspare wheel bag 001Ain
the trunk.
X Open the tailgate.
X Release securing straps 0010on emergency
spare wheel bag 001A. X
Remove emergenc yspare wheel bag 001A
with the "Minispare" emergenc yspare
wheel.
X Open emergenc yspare wheel bag 001Aand
remove the "Minispare" emergenc yspare
wheel.
Always observe the instructions and safety
notes in the "Mounting awheel" section
(Y page 337). Technical data
"Minispare"
emergency spare
wheel
Tires Steel wheel
T1
25/80 R17 99 M
Tire pressure: 420 kPa
(4.2 bar/61 psi) 3.5
Bx17H2
Wheel offset:
0.77 in
(19.5 mm) Emergency sparew
heel
343Wheels and tires Z
