2013 Lexus CT200h Owner's Manual (in English)

1132. Instrument cluster
2
Instrument cluster
CT200h_OM_OM76102E_(EE)Select to change the meter display settings. (P. 650)

1142. Instrument cluster
CT200h_OM_OM76102E_(EE)
Energy monitor
Displays the status of the hybrid system.(P. 1 1 7 )
Lexus parking assist-sensor (if equipped)
Automatically displayed when the system is used (P. 245)
The multi-information display is
operated using the meter control
switches.
Select an item/change pages
Enter/Set
Return to the previous screen
Press:
Displays the screen registered to
When no screen has been registered, the drive information screen will be dis-
played.
Press and hold:
Registers the currently displayed screen to (P. 650)
The registration confirmation screen is displayed. If the selected screen cannot
be registered, a registration failure message will be shown.
Operating the meter control switches
1
2
3
4

1152. Instrument cluster
2
Instrument cluster
CT200h_OM_OM76102E_(EE)
Items displayed can be switched by pressing or of the meter control
switches to select and pressing or .
Current fuel consumption*1
Displays the current rate of fuel consumption
Average fuel consumption (after reset*2/after start/after refuel)*1
Displays the average fuel consumption since the function was reset, the
hybrid system was started, and the vehicle was refueled, respectively
Use the displayed average fuel consumption as a reference.
Average vehicle speed (after reset*2/after start)*1
Displays the average vehicle speed since the function was reset and the
hybrid system was started, respectively
Elapsed time (after reset*2/after start)*1
Displays the elapsed time since the function was reset and the hybrid
system was started, respectively
Distance (driving range/after start)*1
Displays the estimated maximum distance that can be driven with the
quantity of fuel remaining and the distance driven after the hybrid sys-
tem was started respectively.
• This distance is computed based on your average fuel consumption. As a
result, the actual distance that can be driven may differ from that displayed.
• When only a small amount of fuel is added to the tank, the display may not
be updated.
When refueling, turn the power switch off. If the vehicle is refueled with-
out turning the power switch off, the display may not be updated.
Energy monitor
P. 1 1 7
Display off
A blank screen is displayed
*1: Displayed when the item is set in “Drive Info 1” or “Drive Info 2”. (P. 650)
*2: The function can be reset by pressing the of the meter control switches for
longer than 1 second when the item to reset is displayed.
If there is more than one item that can be reset, the item selection screen will
appear.
Drive information

1162. Instrument cluster
CT200h_OM_OM76102E_(EE)
System check display
After turning the power switch to ON mode, opening image is displayed while
system operation is checked. When the system check is complete, the normal
screen will return.
Pop-up display
In some situations, a pop-up display will be temporarily displayed on the multi-
information display.
The following pop-up displays can be set on/off. (P. 650)
• Route guidance display of the navigation system-linked system (if equipped)
• Incoming call display of the hands-free phone system (if equipped)
When disconnecting and reconnecting 12-volt battery terminals
The drive information will be reset.
Liquid crystal display
Small spots or light spots may appear on the display. This phenomenon is charac-
teristic of liquid crystal displays, and there is no problem continuing to use the
display.
NOTICE
The multi-information display at low temperatures
Allow the interior of the vehicle to warm up before using the liquid crystal
information display. At extremely low temperatures, the information display
monitor may respond slowly, and display changes may be delayed.

1172. Instrument cluster
2
Instrument cluster
CT200h_OM_OM76102E_(EE)
Energy monitor/consumption screen
Multi-information display
“DISP” switch/Meter control switches
Navigation system screen/Lexus Display Audio screen (if equipped)
Vehicles with a navigation system
“MENU” button
Remote Touch knob
*
Vehicles with a Lexus Display Audio system
“MENU” button
Lexus Display Audio controller (P. 356)
*: For use of the Remote Touch, refer to “NAVIGATION SYSTEM OWNER’S
MANUAL”.
You can view the status of your hybrid system on the multi-information
display and the navigation system (if equipped)/Lexus Display Audio
system (if equipped).
1
2
3
4
5
6
7

1182. Instrument cluster
CT200h_OM_OM76102E_(EE)
Navigation system screen
Press the “MENU” button on the
Remote Touch, and then select
“Car” on the “Menu” screen.
If the “Trip information” or “Past
record” screen is displayed, select
“Energy”.
Lexus Display Audio screen
Press the “MENU” button on the
Lexus Display Audio controller,
and then select “Car” on the
“MENU” screen.
If the “Energy monitor” screen does
not appear, move the controller to
the right and select “Energy”.
Multi-information display
Vehicles with monochrome display:
Press the “DISP” switch on the steering wheel several times to select the
energy monitor display.
Vehicles with color display:
Press or of the meter control switches and select , and then press
or to select the energy monitor display.
Energy monitor

1192. Instrument cluster
2
Instrument cluster
CT200h_OM_OM76102E_(EE)
Navigation system screen/Lexus Display Audio screen
Navigation system screenLexus Display Audio screen
When the vehicle
is powered by the
electric motor
(traction motor)
When the vehicle
is powered by both
the gasoline
engine and the
electric motor
(traction motor)
When the vehicle
is powered by the
gasoline engine
When the vehicle
is charging the
hybrid battery
(traction battery)
When there is no
energy flow

1202. Instrument cluster
CT200h_OM_OM76102E_(EE)
These images are examples only, and may vary slightly from actual con-
ditions.
Multi-information display screen
Hybrid battery
(traction battery)
status
LowFullLowFull
Navigation system screenLexus Display Audio screen
Monochrome displayColor display
When the vehicle
is powered by the
electric motor
(traction motor)
When the vehicle
is powered by both
the gasoline
engine and the
electric motor
(traction motor)
When the vehicle
is powered by the
gasoline engine
When the vehicle
is charging the
hybrid battery
(traction battery)