2013 AUDI TT Owner´s Manual

Trip computer
Introduction
The trip computer gives you information on
current and average fuel mileage, average
speed, fuel range and driving time .
Fig. 8 T rip comp ute r 1
The fo llow ing informa tion is cont inuo usly
eva luated by the trip compu ter and can be dis ­
p layed sequentia lly in the instrument cl uster
d isplay:
Fuel range
The estimated c ruising ra nge in miles (km)
appears in the d isplay . The disp lay changes in
increments of 6 miles (10 km) .
Average fuel mileage
The average fue l economy in MPG (l/ 100 km)
since you last clea red the memory appears in
t his display .
Current fuel mileage
The instantaneous fuel consumption in miles
pe r gallon (l/ 100 km) is shown in this d isp lay .
When the ve hicle is stationary, the most re­
cent fuel consumpt io n is displayed.
Average speed
The average speed in mph (km/h) since the
last time the display was reset appears i n the
d isp lay.
Elap sed t ime
The length of time that you have been driving
since you las t reset the memory appears in
this display . The maximum t ime period that
can be recorded is 999 ho urs and 59 minutes .
Driver in formation system 23
Distance
The elapsed dis tance sin ce the las t time the
memory was cleared appears in the d isp lay .
T he maxim um distance that can be recorded
is 9 ,999.9 miles (9,999 .9 k ilometers) .
(D Tips
- Fuel consump tions (average and cur ­
rent), range and speed are disp layed in
metric un its on Canadian mode ls.
- All sto red val ues wil l be lost if t he vehi ­
cle battery is d isconnected .
' . Memories
The trip computer is equipped with two fully
automatic memories as well as on efficiency
progrom.
Fi g. 9 Trip co mputer d isplay: memo ry level 1
You can switch between the trip computer 1
and 2 and the efficiency program* by pressing
the
I R ES ET I button @ c::> page 24, fig . 10 .
You can tell wh ich memory leve l is currently
active by the number or the sign in the display
c::> fig . 9. The data from the single-trip memo­
ry (memo ry level 1) is being displayed if a
1
appea rs i n t he display . If a 2 is shown, then
the data from the total- trip memory is being
displayed (memory level 2). The f ue l pump
nozzle
ii indicates the efficiency program *
c::> page 26.
Single-trip memory (Trip computer 1 )
The sing le -t rip memory stores the tr ip info r­
ma tion from the time the ig nition is tu rned on
u nt il it is tur ned off. If the tr ip is cont inued
within 2 hour s from the time the ignit ion was
turned off, the new data will be included in ..,.

24 Driver information system
the calculation of the current trip informa­
t ion. If the trip is interrupted for
more than 2
hours
the memory is reset automatica lly.
Total -trip memory (Trip computer 2)
Unlike the sing le-trip memory, the total-trip
memory is not reset automatically. This per­
mits you to evaluate your dr iving data for the
entire period between manual resets.
Efficiency program*
The effic ien cy program can help you to use
less fuel ~
page 26.
Operation
The trip computer is controlled by two
switches on the windshield wiper lever.
-----------< @
Fig. 10 W iper arm/w iper lever: con tro ls for t he trip
compute r
Selecting the trip computer
" Tap the I Reset I button @ until the trip com ­
puter (memory level 1 or 2) appears in the
display ¢
page 23, fig . 8 .
Selecting the functions
" Push in the upper ( lower) protrusion on the
function selector switch @
q fig. 10. The
functions for the trip computer are d is ­
played in succession on the respective mem­
ory levels.
Resetting the function to zero
" Push the I Reset ! button ® for at least two
seconds.
You can reset the fo llowing values to zero us­
ing the
I Reset I button :
- driving time - distance
-
average f uel mileage
- average speed
The t rip computer only operates when the ig­
nition is on. When you turn on the ignition,
the function that was in use when you last
turned the ignition off will be displayed .
(D Tips
-You can also set the values for the func­
tions to zero in the menu display
(Reset )
qpage24 .
-All stored values will be lost if the vehi­
cle battery is disconnected .
- The driving information in the efficiency
program is a lso reset to zero w ith the
single-trip memory.
Menu display
Introduction
Display Type
•set
iF'Cf t -,,., ==
Menu off
Fig. 11 D isplay: Sta rt men u
Some funct ions in yo ur vehicle can be set , ac­
t ivated, and controlled by
Menus (e.g. Acous­
tic park assist *). With these menus you can al­
so select the information shown in the driver
information system, which operates only with
the ignition switched on. Operation is control­
led by the
! Reset I button and the rocker switch
on the wiper lever
q page 25, fig . 12.
The Start menu shows you the different dis­
play types:
Set
Check
Menu off

Each display type in the Start menu cont ains a
submenu with additional options.
Set Clock ¢ page 26
Compu ter ¢page 26
Acoust ic park assist*
¢page 78
Speed warning ¢ page 76
Language¢
page 26
Units (distance, fuel consump­
tion, temperature) ¢
page 26
Tire pressure monitoring
¢page 214
Lap timer *¢ page 29
Lighting* ¢ page 42
Wiper (service position)
¢page SO
Window¢ page 40
Doors (unlocking and locking
mode, for example Auto-lock)
¢ page 34, ¢ page 34
Check Service ¢ page 2 8
Chassis number ¢page 238
Engine oil temperature*
¢ page 26, ¢ page 28
Registered keys ¢ page 32
Menu off All of the messages shown in
veh icles without menu display
appear on the disp lay s creen.
Navigating the menu
Use the rocker switch on the windshield wiper
lever and the
I Reset ! button to operate the
menu and carry out inquiries and selections .
l8
~ ;A
®
Fig. 12 W iper lever: Cont rols fo r th e me nu display
Dr iver in formation system 25
Fig. 13 D isplay: Start menu
I Reset I button @ and rocker switch @
¢ fig. 12 fu nctions:
To open the menu
.. Press t he I Reset I button @ until the menu
disp lay¢
fig . 13 appears
Sel ections and sett ing s
.. Press the rocker switch @to reac h a men u
disp lay. The switch is operated the same as
the display (up/down) .
Entering and confirming
.. Press t he I Reset ! butto n@ .
Returning to the Start menu
.. Press the I Reset I button longer than 2 sec­
onds to return from any menu level to the
Start menu.
Using the rocker switc h, you can se lect the
menus in the d is p lay or change settings. A
cu rso r appears on th e left in front of these­
lec ted values.
By pressing the
I Reset I button, you activate
the selection you made or confi rm the values
you set.
Selected functions are identified with
a check ma rk or are carried out d irectly .
Mean ings of the symbols in the display:
Sele c- Selected f unc- Me an ing
tion tion
ba r
> Cursor Current Selection
./
Check mark Selected or Fune
-
t ion active
...

26 Drive r information system
-I
10
Box Not selected
~
Triangle point- Previous page
ing up
Triangle point- Next page ing down
Selecting settings
Th e Driver Information System settings are
menu-guided.
Fig. 14 Display: Menu Settings, computer selected
(page 1)
Select your settings as follows:
,.. Press the !Reset
I button . The Start menu
appears¢
page 24, fig . 11.
,.. Press the rocke r switch until Set is d is­
played .
,.. Press the
I Reset I button. All the menus ap­
pear.
,.. Press the rocker switch until the desired line
is highlighted (cursor)¢
fig. 14.
,.. Press the !Resetl button.
,.. If necessary, scroll by selecting and activat­
ing the symbol for "Next page" or "Previous
page" .
When you have selected the Computer menu
and activated it by pressing the
I Reset ! but ­
ton, two computer levels appear (computer 1
and computer 2). Now you have to select the
level you want using the rocker switch and ac­
tivate it w ith the
I Reset I button .
Engine oil temperature
display
Applies to veh icles: w it h eng ine temperature control d is ­
play
• Engine oil
Temperature
176 °F
•Back
Fig. 15 Display: eng ine o il temperature d isp lay
,.. With the ignition switched on, press the
N a, !!? ti. m m
I RESET I button ¢ page 24, fig . 10 repeated­
ly until the engine oil temperature disp lay is
shown.
T he engine has reached its operating temper­
ature when the engine oil temperature is be­
tween
176 Of (80 °() and 248 O f (120 °() U n·
der normal driving conditions. The engine o il
temperature may be higher if there is heavy
engine load and high temperatures outside.
This is not a cause for concern as long as the
• ¢page 16 orlll c=> page 19 warning light
in the display does not flash .
Efficiency program
Description
Applies to vehicles: w ith trip computer with eff iciency
p rogram
..
lJI 300m,
27.7 mpg
25.8 m1>g
Fig. 16 Dis play: efficiency program
,.. Press the I RESET ! button @ c:> page 24,
fig . 10
repeatedly until the efficiency pro­
gram appears in the display.

The efficiency program can help you to use
less fuel.
It eva luates driving information in
reference to fuel consumption and shows oth­
er equipment influencing consumption as we ll
as shift recommendations. Fuel economy
messages
c> page 2 7 prov ide tips for effi­
cient dr iv ing .
The efficiency program uses distance and con­
sumption data from trip computer
1. If the
data are deleted in the efficiency program,
those values are also reset in trip computer
1.
Other equipment
Applies to vehicles: with trip computer with efficiency
program
Fig. 17 Display: other equ ipment
.. In the effic iency program, press the func­
tion select ion switch
c> page 24, fig . 10 @
repeatedly until the other equipment ap­
pears in the display.
Other equipment that is currently affecting
fuel consumption is listed in the efficiency
program. The display shows up to three other
items of equipment @. The equipment using
the most fuel is listed first. If more than three
items using fuel are switched on, the equip­
ment that is currently using the most fuel is
displayed .
A scale @also shows the current total con­
sumption of all other equipment.
Driver in format ion syste m 2 7
Fuel economy messages
Applies to vehicles: with trip computer with efficiency
program
Fig. 18 Display: fuel economy message
Fuel economy messages are displayed when
fuel consumption is increased by certain con­
ditions. If you follow these fuel economy mes­
sages, you can reduce your vehicle's consump­
tion of fuel. The messages appear automati­
cally and are only displayed in the efficiency
program. The fuel economy messages turn off
automat ically after a certain period of time .
.. To turn a fuel economy message off imme-
diately after it appears, press the
I RESET !
button ¢ page 24, fig. 1 0 @ , or
.. Press the function selection switch
c> page 24, fig. 10 @ .
@ Tips
-Once you have turned a fuel economy
message off, it will only appear again af­
ter you turn the ign ition on again.
- The fuel economy messages are not dis­
played in every instance, but rather in in­
tervals over a period of time.

28 Driver information system
Service interval display
The service interval display reminds you when
your next service is due.
Fig. 19 Sect ion of instrument cluster: Serv ice inte rva l
d isplay
The schedule for the next oil change or inspec­
tion is calculated automatically and displayed
accordingly. The display works in two stages :
Service reminder
30 days before the next service is due, a serv­
ice reminder appears in the display when you
turn on the ignition.
After about
S seconds the display switches
back to normal. The distance and time re­
maining are updated each time the ignition is
turned on until the date due for service is reached .
Service due
When the due date for service is reached , the
message
Service due! appears in the instru­
ment cluster immediately after you turn on
the ignition. Additionally, a warning tone
sounds . After about
S seconds the display
switches back to normal.
Calling up the service schedules
If or when an oil change or inspection is due,
can be shown in the instrument cluster by se­
lecting the service interval display. Select
Check > Service > Oil change or Service by us­
ing the
! RESET I button and the rocker switch
c;, page25, fig.12.
Resetting the service interval display
Your authorized Audi dealer will reset the cor­
responding service schedule after performing the appropr
iate service on your vehicle. You
also have the possibility to reset the oil
change schedule after hav ing performed an
oil change according to Aud i specifications.
- Switch the ignition on.
- Pull the knob¢ fig. 19. The message.
Serv-
ice due!
appears.
- Pull the knob until the display
Oil change in
----- mi (km)·-- days
appears. If the I RESET I
button is not pulled within 5 seconds, the
disp lay reset mode closes.
(D Note
If yo u disconnect the battery terminals, no
ca lculations can be made for the service
interval display during this time and no
service reminder will appear. Remember
that observing the proper service intervals
is vitally important to extending the life of
your vehicle, particularly the engine, and maintaining its value . Even if the mileage
driven is low, the maximum period of one
year from one service to the next must not
be exceeded.
(D Tips
-Do not reset the display between oil
changes, otherwise the display will be in­
correct.
- The information in the Service Reminder
remains stored even when the vehicle
bat tery is disconnec ted.
Boost and engine oil
temperature indicator
Appl ies to vehicles: wit h boost pressure indicato r
0 ~ 00 0
j IX)
Fig. 20 D isplay : boost and engine oi l temperature indi·
a~r ~

.. With the ign ition switched on, press the
button -arrow- repeatedly unt il th e display
is shown.
Boo st p ressure indicator (boost )
A bar graph tha t begins on the left and fills in
toward the r ight i nd icates the engine's cu r­
rent load (mean ing the c urrent boost pres ­
sure) .
Engine oil temperature indicator
If the e ngine o il temperature is be low 140 ° F
(60
°(), the 'l::r. symbo l followed by th ree hy­
phens " - - -" and the °C un it is shown.
The engine has reached its ope rat ing temper­
ature when the eng ine o il tempe ra ture is be­
tween
176 °F (80 °() and 248 °F (120 °() u n­
der normal driving conditions . The engine oil
temperature may be higher if there is heavy
engine load and high temperatures outsid e.
T his is not a cause for concern as long as the
• qpage 16 or II q page 19 wa rning ligh t
in the display does not flash.
Lap timer
Introduction
Appl ies to vehicles: with lap timer
You can record and eva luate lap t imes with
the lap timer in the display~
page 29,
fig. 22 . The time is measured in minutes, sec­
onds and 1/10 seconds . The hours are a lso
shown when the lap time exceed s 60 minu tes.
T he max imum individual measurement is 99
hours .
..&, WARNING
Please devote your fu ll attent ion to driv­
ing. As the d river, you have comp lete re ­
s pon sibility fo r safety in traffic. Only use
the funct io ns in such a way that you always
maintain complete control over your vehi ­
cle in all traff ic situations.
Dr iver in formation system 29
@ Tips
When the lap timer stopwatch is run ning,
you can ca ll up the tr ip comp uter informa­
tion with the
I RESET ! button.
Calling up the lap timer and timing
Applies to veh icles: w ith lap timer
~-- @
Fig . 21 Co ntro ls
Fi g. 22 D isplay: Lap t imer
Calling up the lap timer
.,. Press t he I RES ET! q fig. 21 @ butto n until
t he lap timer ~
fig. 22 appears.
Timing laps
.,. To start tim ing , press the upper section of
the wiper switch @. The time measurement
is shown in
line @~fig . 22 .
.. To stop t iming, press the upper sec tion of
t he wiper swit ch @ aga in. This also s tarts
t iming the next round . The previous time
moves one line up, first to line @and then
to line @. Line @shows the current lap
number, for example LAP 5.
ll>

30 Driver information system
Displaying intermediate time and pausing
timing
• To disp lay an intermediate time, press the
l ower section of the wiper switch @. The in­
termediate time appears in line
CD and is
marked with*.
• To pause timing, press the lower section of
the wiper switch @again.
• To continue timing, press the upper section
of the w iper switch @.
If t iming is paused, you can conti nue it later
even if you switch the ign it ion off.
Evaluating times and continuing or
resetting timing
Appl ies to vehicles: with lap timer
You can evaluate the fastest, slowest and
average lap times.
LAP 5
+ 45:12.9
59:08.B
flJ 51 :10.B
Fig. 23 Display: lap time evaluation
• To eva luate lap times, press and hold the
I RESET I ¢ page 29, fig. 21 @ button for ap­
proximately 2 seconds. The display shows
the fastest lap"+", the slowest lap"-" and
the average lap time "0".
• To continue t iming for addit ional laps, press
the wiper switch @.
• To reset th e timer to zero, press and hold
the
I RESET I button again for approximate ly
2 seconds.
• To switch the lap timer off completely,
press the
I RESET I button briefly.
@ Tips
-Saved lap times cannot be individually
deleted from the total results.
- The saved lap timer values will not be
l ost after turning the ignit ion off .
On-Board Diagnostic
system (OBD)
Malfunction Indicator Lamp (MIL)
The Malfunction Indicator Lamp (MIL) &ii in
the instrument cluster is part of the On-Board
Diagnostic (OBD II) system.
T he warning/indicator light ill uminates when
the ignition is switched on and goes out after
the engine starts and the id le has stabilized.
This indicates that the MIL is working proper­
ly.
If the light does not go out after the engine
is started, or illuminates while you are driv ­
ing, a malfunction may exist in the engine sys­
tem .
If the light illuminates, the catalytic con­
verter could be damaged .
Continue driving
with reduced power (avoid­
ing sustained high speeds and/or rapid accel­
erations) and have the condition corrected.
Contact your authorized Audi dealer.
If the light il luminates, the electronic speed
limiter may also be malfunctioning. For more
information¢
page 31, Electronic speed
limiter.
An improperly closed fuel filler cap may also
cause the MIL light to illuminate
¢page 178.
On-Board Diagnostics
Fig. 24 Location of Data Link Con nector (O LC)
On-Boa rd Diagnostics monitors the compo ­
nents of your emission contro l system. Each
monitored component in your engine system
has been assigned a code. In case of a .,.