Page 17 of 302
.
15
i
Familiarisation
Sitting comfortably
Door mirrors
Adjustment
1.
Selection of the mirror. 2.Adjusting the position of the mirror glass. 3.De-selection of the mirror.
92
Other functions...
Folding/Unfolding. Automatic dipping in reverse.
Rear view mirror
Manual day/night model
1.Selecting the "day" position of the rear
view mirror.
2. Rear view mirror adjustment.
Automatic day/night model
94 1
.Automatic detection of day/night mode.
2. Rear view mirror adjustment. 1
. Fitting the belt.2.Fastening.3.Check that the belt is correctly fastened by pulling on the belt webbing.
Front seat belts
172
Page 18 of 302
16
Familiarisation
Seeing clearly
Lighting
Ring A
Ring B
Wipers
142
Control stalk A: windscreen wipers
2. Fast wipe. 1.Normal wipe.Int.Intermittent wipe.
0. Park.
AUTOAutomatic wiping. È Single wipe: Brief pull on the stalk
towards.
Screenwash: Long pull on stalk towards you.
151
Switching on "AUTO" mode
)Briefly push the stalk downwards. )Briefly push the stalk downwards or place
the stalk in another position: Int, 1 or 2.
Ring B: rear wiper
15 3
152 Li
ghting off.
Automatic illumination o
f headlamps.
Sidelamps.
Dipped/main beam headlamps.
Rear
foglamps.
Park.
Intermittent wipe.
Screenwash.
Page 19 of 302
.
17
Familiarisation
Vent ilat ion
Digital air conditioning:use fully automatic operation in preference, by pressing the "AUTO"
button.
Recommended interior settings
I require...
Heating or Manual air conditioning
Air distributionAir flowAir recirculation/Intake of exterior airTemperatureManual AC
HOT
COLD
DEMISTINGDEFROSTING
Page 20 of 302
18
Familiarisation
Monitoring
On switching on, the dial needles go to
the extent of their travel then return to 0. A. With the ignition on, the needle shouldindicate the fuel remaining. B.With the engine running, the associated low level warning lamp should go off.
Instrument panel
1.
With the ignition on, the orange and red
warning lamps come on.2.With the engine running, these warninglamps should go off.
If a warning lamp remains on, refer to the page concerned.
Warning lamps
46
C.
With the ignition on, the instrument panelscreen should indicate the oil level.
If the levels are not correct, top up the level
whi
ch is low.
45
Page 21 of 302
.
19
Familiarisation
Passenger safety
1.
Open the glove box. 2.Inser t the key. 3.Select position:"ON"(activation), with front passenger or
"forwards facing" child seat, "OFF"
(deactivation), with "rear facing" child seat. 4.
Remove the key keeping the switch in the
new position.
Front passenger's airbag
176
A.
Front seat belts not fastened or unfastenedwarning lamp.
Front seat belts and
passen
ger's front airbag
176
B. Airbag fault warning lamp.
C.
Front passenger's airbag activationindicator lamp. 17
3
Page 22 of 302
20
Familiarisation
Driving safely
Starting the HYbrid4 system
25
- Inser t the electronic key in the switch or if the vehicle is fitted with Keyless Entry and Starting, keep the electronic key in the
vehicle.
- Ensure that the gear lever is in position N.
- The instrument panel and the Ready
lampcome on.
- The dial in the centre console is in AUTO
m
ode.
Moving off
- While maintaining pressure on the brake pedal, move the gear lever to position A
to go forwards, or Rfor reverse.
- Ta k e y o u r foot off the brake pedal; you cannow move off.
- The parking brake is released automatically as you move off.
- Press the brake pedal
firmly.
- Pr
ess the STA R T/STOP
button or turn
the key fully towards the dashboard to
position 3 (Start), to initiate star t-up of the
hybrid system.
Page 23 of 302
.
21
Familiarisation
Driving safely
Speed limiter "LIMIT"
1.
Selecting speed limiter mode.2.Decrease the programmed value.3.Increase the programmed value.4.
Pause/resume speed limiter.
5. Speed limiter off.
The values must be set with the engine running.
133
135
Cruise control
"CRUISE"
1.Selecting cruise control mode.2. Decrease the programmed value. 3.
Increase the programmed value.
4. Pause/resume cruise control.
5. Cruise control Off.
In order to be programmed or activated, the
vehicle speed must be higher than 25 mph(40 km/h), with at least 2 ndgear engaged.
Display in the instrument panel
The cruise control or speed limiter mode
appears in the instrument panel when it isselected.
Cruise contro
l
Speed limiter
Page 24 of 302
22
Hybrid system
Presentation
energy to be associated in an effective manner:
the Diesel HDi engine, which drives the front
wheels and the electric motor, which drives the rear wheels.These two motors can operate alternately or simultaneously, according to the hybrid modeselected and the driving conditions.
The electric motor alone provides power for
the vehicle in "ZEV" (Zero Emissions Vehicle) mode, and in "Auto" mode for running at slowspeed and low load. It also assists the Dieselengine when moving off, accelerating and changing gear.The battery that powers the electric motor is recharged during phases of deceleration andstores the energy for subsequent use.
1.Diesel HDi engine (front wheel drive). 2. Electric motor (rear wheel drive).3.
200 V battery.4.Electronic power supervisor.
5
.Stop & Start system. 6
.6 -speed electronic gear control gearbox. 7. Electrical flow. 8.HYbrid4 mode selector.