2012 MERCEDES-BENZ E-CLASS ESTATE Owners Manual

Page 321 of 457

MERCEDES-BENZ E-CLASS ESTATE 2012  Owners Manual X
Vehicles without memory function: if nec-
essary, move the driver's or front-
passenger seat forwards.
X Pull the left-hand or right-hand release han-
dle at the rear in load compartment :or
at

Page 322 of 457

MERCEDES-BENZ E-CLASS ESTATE 2012  Owners Manual Observe the following notes on securing
loads:
R
secure the load using the lashing eyelets.
R do not use elastic straps or nets to secure
a load, as these are only intended as an
anti-slip protection

Page 323 of 457

MERCEDES-BENZ E-CLASS ESTATE 2012  Owners Manual luggage compartmen
tcover by suitable
means. Make sure that the luggage compart-
ment cover is engaged securely. If luggage is
not sufficiently secured, it can be thrown over
the backrest into the pas

Page 324 of 457

MERCEDES-BENZ E-CLASS ESTATE 2012  Owners Manual X
First, detach the combined luggage cover
and net from left-hand catch :and then
remove it from right-hand fixture =.
X To install: push the combined luggage
cover and net up to the stop into right-h

Page 325 of 457

MERCEDES-BENZ E-CLASS ESTATE 2012  Owners Manual Safety net with luggage compartment
enlargement
X
Make sure that the safety net is attached
to the rear seat backrest (Y page 320).
X Guide the safety net up by tab :and hook
it into eyelets ;. Coat h

Page 326 of 457

MERCEDES-BENZ E-CLASS ESTATE 2012  Owners Manual face
;has reached the desired position
and the box is the desired size.
X To raise the load surface: press switch
=.
Load surface ;of the box moves up auto-
matically.
X To stow the box: push the box

Page 327 of 457

MERCEDES-BENZ E-CLASS ESTATE 2012  Owners Manual X
Insert bracket :into the centre of loading
rail ?.
X Press release button ;and push
bracket :into the desired positio ninload-
ing rail ?.
X Let go of release button ;.
X Press locking button =.
Bra

Page 328 of 457

MERCEDES-BENZ E-CLASS ESTATE 2012  Owners Manual X
To install: insert one bracket ;into both
the left and the right loading rails and slide
it to the desired positio n(Ypage 323).
X Insert telescopic rod :into brackets ;
and, while doing so, press r